Mango wood dining chairs — solid-hardwood seating, manufactured for export.
A dense, cost-advantaged hardwood with a lustrous grain and a deforestation-free orchard story — built as a genuine solid-wood dining chair, not a particleboard shell. Manufacturer-direct, compliance-documented and container-ready, from a trial order up to repeat volumes.
The dining chair gets the hardest daily use in the room — so it earns a real hardwood.
A dining chair is pulled out, sat in, leaned back on and loaded several times a day — the piece most likely to fail first if it is built from particleboard or thin softwood. Built in mango, it bridges the gap between cheap panel seating and premium rosewood: real frame density, a characterful grain that sells on the shelf and online, and orchard-sourced timber that keeps your range solid wood and deforestation-free. Every chair carries a solid mango-wood frame; we pair it with the seat and back your channel sells — carved mango, hand-woven cane, or upholstered and leather. Choose a ready design from our catalogue or hand us your own; we build, finish and pack it to your market's standard, and consolidate it into a container with matching mango wood dining tables and benches.
Built for daily load
A Janka hardness near 1,070 lbf puts mango alongside walnut and most oak — dense enough to hold mortise-and-tenon joints and corner blocks tight through the daily pulling and leaning of a dining floor.
Clean to carve & turn
Mango machines, turns and CNC-carves cleanly, so cross-backs, ladder-backs, spindle profiles, shaped seats and tapered legs come out crisp and repeatable across a production run.
A sustainability story
Harvested from spent fruit orchards on a replant cycle — a by-product of existing agriculture, documented with FSC chain-of-custody and Vriksh timber-legality.
One timber, the full dining-chair range.
Every chair starts from a solid mango-wood frame; we pair it with the back and seat your buyers want. Mix side chairs and carvers across a single mixed container.
Mango & cane dining chairs
Hand-woven cane backs and seats on a mango frame — the airy, breathable boho and resort look buyers keep asking for.
Explore cane & rattan seating
Mango & upholstered chairs
Full-grain leather or fabric drop-in seats over a carved mango frame — the high-value hospitality and retail staple.
Explore leather & upholstery materials
Mango & iron dining chairs
Solid mango seats on powder-coated wrought-iron frames — industrial dining seating that ships knock-down.
Explore wood & iron seatingCross-back and X-back farmhouse chairs, ladder-backs, spindle and Windsor-style chairs, carved occasional side chairs and carver (arm) chairs all build cleanly on the same mango frame. See the full range across woods on the dining chairs manufacturing hub.
Indicative specs — every dimension and finish is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so seat height, back height, seat depth, finish and upholstery are all specified at the quote stage. Mango is kiln-dried for stability before joinery, and lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Frame wood | Solid mango (Mangifera indica) · ~1,070 lbf Janka |
| Seat & back | Solid mango · woven cane/rattan · upholstered · leather |
| Legs | Carved or turned mango, or powder-coated wrought iron |
| Styles | Cross/X-back, ladder-back, spindle/Windsor, carved side chair, carver (arm) chair, industrial wood & iron |
| Seat height | Approx. 45–48 cm (18–19 in), custom on request |
| Overall width | Approx. 44–58 cm (17–23 in) |
| Overall height | Approx. 88–102 cm (35–40 in), style-dependent |
| Pairs with | Table top height approx. 74–76 cm (29–30 in) |
| Finish | Natural oil/wax, satin or gloss PU lacquer, stain, distressed — CARB/TSCA-compliant |
| Assembly | Assembled, part-assembled or knock-down / flat-pack (RTA) |
| Packing | Export carton · ISPM-15 · retail / FBA-ready on request |
Where a mango dining chair earns its place.
A finisher's wood
Mango's open, receptive grain carries everything from pale limewash to deep espresso cleanly. We supply natural matte oil and wax for the on-trend organic look, satin and gloss PU lacquer for harder-wearing restaurant and café surfaces, hand-distressed and antique tones, walnut and grey stains, and two-tone or metal-banded looks paired with iron. All interior-market finishes are specified CARB / TSCA Title VI formaldehyde-compliant on request, matched to your reference or Pantone. Drop-in leather and fabric seats are selected to suit residential or commercial wear and are field-replaceable.
Rooms and channels it sells into
Dining sets and occasional chairs for retail ranges; dining rooms, restaurants, cafés, bars and private dining for hospitality and contract buyers; styled statement seating for interior designers; and compact, flat-pack-friendly SKUs for online sellers and dropship catalogues. Because mango is not naturally rot-resistant, we build these for indoor use — for covered terrace or poolside dining, acacia or teak is the better specification.
Dining seating that clears customs — not seating that sits at the port.
Because mango comes from managed orchards rather than forest, it is a natural fit for today's import rules. We supply every dining chair with FSC chain-of-custody and Vriksh timber-legality documentation, EUDR-ready geolocation and deforestation-free due diligence, US Lacey Act declaration support and UK Timber Regulation readiness — all backed by ISO, SGS and SEDEX/SMETA audits and packed to ISPM-15. Certificate details go directly to serious buyers on request and are never published. See every certification and timber-legality document we hold.
| Requirement | How mango dining chairs are supplied |
|---|---|
| Timber legality | Vriksh verified · orchard-sourced |
| Sustainability | FSC chain-of-custody · orchard by-product |
| EU market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Export packing | ISPM-15 heat-treated · knock-down options |
Questions buyers ask about mango wood dining chairs.
Why choose mango wood for dining chairs?
Mango (Mangifera indica) is a dense tropical hardwood — a Janka hardness around 1,070 lbf, close to black walnut and most oak — so a mango dining chair holds its mortise-and-tenon joints tight through daily pulling, leaning and weight that loosens particleboard and softwood seating. It machines, turns and CNC-carves cleanly for cross-backs, spindle and ladder-back profiles, shaped seats and tapered legs, takes stain and lacquer evenly, and shows a lustrous, richly figured grain that lifts a chair on the shelf and online. Because the timber comes from spent fruit orchards on a replant cycle, it is a genuine solid wood with a deforestation-free story your buyers can stand behind.
What seat height are your mango wood dining chairs, and will they fit standard tables?
Our mango dining chairs sit at a typical seat height of about 45–48 cm (18–19 in), which pairs with a standard dining table top height of roughly 74–76 cm (29–30 in) and leaves comfortable thigh clearance. Counter-height and bar-height stools are built separately. Seat height, back height and seat depth are all specified at the quote stage, so we can match your exact table range or market convention.
What is the minimum order for wholesale mango wood dining chairs?
A trial or sample order can ship LCL (part-container) so you approve the frame, finish and comfort first. For best wholesale pricing thereafter, one 20ft full container load (FCL) is our standard minimum, and we consolidate dining chairs with dining tables, benches and décor into a single mixed container. Typical lead time is 30–45 days after sample approval, with urgent orders at a premium.
Can you make mango wood dining chairs to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, dimensions, seat height, back profile, finish and upholstery, with custom CNC carving, your branding and retail-ready, Amazon-FBA-ready or gift packaging. Send a reference image or a spec sheet and we prototype a sample dining chair in mango to it.
Are mango wood dining chairs compliant for US and EU import?
Yes. We document FSC chain-of-custody and Vriksh timber-legality, backed by ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA Title VI formaldehyde-compliant finishes and ISPM-15 export packing. Certificate details are shared directly with serious buyers on request, never published.
Can mango wood dining chairs ship knock-down to save freight?
Many of our dining chairs ship knock-down (RTA) with bolt-on legs or a bolt-on seat frame to raise container density and cut breakage and freight — ideal for large importers and online sellers. Fully assembled and part-assembled builds are available where a one-piece carved or woven-cane chair calls for it.
Are mango wood dining chairs suitable for restaurants, cafés and contract use?
Yes. We build side and carver dining chairs in solid mango with commercial-grade joinery, corner blocks and QC on every piece, finished in hard-wearing PU lacquer or contract-grade leather and fabric for restaurant, café and hotel dining floors. Because mango is not naturally rot-resistant we build these for indoor use; for covered terrace or poolside dining, acacia or teak is the better call.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, quantity and market. We confirm wood, finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.