Coastal dining chairs, handcrafted in Jodhpur — wholesale for resort, restaurant and beach-house tables.
Light solid-wood frames in mango, acacia and whitewashed wood, with woven cane, rattan, rope and soft linen seats — cross-back, ladder-back, spindle and cane-back dining chairs that finish a coastal table. Manufacturer-direct, compliance-documented and container-ready, from a trial order up.
Pale wood, an airy back and a woven or linen seat — the chair that sets a relaxed table.
Coastal dining is about lightness and ease. The chairs sit low and open around the table: bleached and driftwood tones, a cross-back or spindle silhouette that lets light through, a cane or rope seat, and a palette drawn from sand, rope and sea glass. It is the breakfast chair in a beach-house kitchen, the cross-back around a Hamptons farmhouse table, the cane-seat chair on a seafront restaurant terrace. We build that look on a genuine solid-wood frame — kiln-dried, properly joined and sealed — so it keeps its airy character on your retail floor and takes years of daily pull-in, pull-out use, instead of loosening at the joints or peeling after one humid season.
Choose the silhouette, seat and wood your channel sells — built on a solid-wood frame.
Cane-back & rattan dining chairs
Hand-woven cane backs and rattan seats on pale mango or acacia frames — the breezy resort and boho dining look.
Explore cane & rattan seating
Cross-back & ladder-back chairs
Limewashed and driftwood-grey cross-back and ladder-back frames in mango and acacia — the pale, airy Hamptons silhouette.
Explore mango-wood seating
Rope & jute woven chairs
Natural jute and rope-wrapped seats over solid-wood frames — the textured, nautical dining-table seat.
Explore jute & natural-fibre seatingLinen seat-pad dining chairs
Soft neutral linen or your own fabric on an upholstered seat pad over a light carved frame — comfort for longer dinners.
Explore acacia-wood seatingWood & metal coastal chairs
Pale solid-wood seats on powder-coated, rust-resistant iron frames — ship knock-down for container density.
Explore wood & iron seatingRestaurant & resort dining chairs
Café, seafood-restaurant, terrace and hotel dining chairs QC-checked for heavy commercial, humid-climate use.
Coastal dining chairs for hospitalityIndicative specs — every wood, weave and finish is made to your order.
Figures below are typical ranges for reference. Dining chairs are built to sit comfortably under standard dining tables, so seat height is kept consistent across a set — but we manufacture to your exact drawings and market requirements, so frame wood, back silhouette, seat material, finish tone and dimensions are all confirmed at the quote and sample stage. Lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Frame woods | Mango, acacia, rubberwood, pine; whitewashed sheesham on request |
| Back silhouette | Cross-back (X-back) · ladder-back · spindle · cane-back · slat-back |
| Seat | Woven cane / rattan · rope / jute · linen or fabric seat pad · solid wood |
| Finishes | Whitewash, limewash, driftwood-grey, sun-bleached, natural matt — CARB / TSCA compliant |
| Legs / stretchers | Solid wood or powder-coated, rust-resistant wrought iron |
| Seat height | Approx. 45–48 cm (18–19 in) to suit standard dining tables |
| Overall width | Approx. 45–52 cm (18–20 in) |
| Overall height | Approx. 90–100 cm to top of back |
| Form | Assembled, part-assembled or knock-down / flat-pack (RTA) |
| MOQ | LCL trial / sample order; 1× 20ft FCL minimum thereafter for best pricing |
| Lead time | 30–45 days typical; urgent orders at a premium |
| Shipping terms | FOB / CIF from Mundra or Nhava Sheva, India |
| Packing | Export carton · ISPM-15 heat-treated · retail / FBA-ready on request |
Built for humid dining rooms — and for your customs broker.
Import-ready on every container
Our coastal dining chairs ship with FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of sheesham where used, backed by ISO, SGS and SEDEX / SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA finishes and ISPM-15 export packing — so your seating clears the port instead of sitting in it. See every certification we hold.
Care around the table
Light woods and natural weave prefer stable, well-ventilated rooms. We kiln-dry frames and seal them with moisture-tolerant lacquers; a soft dry wipe and an occasional wood feed keep the pale finish even, while cane and rope stay taut with a light damp wipe and good airflow. Linen seat pads should be spot-cleaned per the care label, and for salt-air floors we specify rust-resistant hardware and powder-coated iron. We share care and assembly guidance with every order so your buyers keep the chair selling for years. Compare wood options in our solid-wood materials guide.
Coordinated coastal dining sets in one compliant container.
Coastal dining chairs ship best as part of a matched range. We produce coordinated dining chairs alongside matching coastal dining tables, benches and sideboards in the same light wood, finish and detail, so a complete dining set lands in a single consolidated container — fewer shipments, consistent tone, one set of compliance paperwork. Mix cross-back chairs with a bench on one side, or specify a full room of cane-back chairs for a restaurant fit-out.
Coastal dining chairs — wholesale & export FAQ
What makes a dining chair coastal?
A coastal dining chair reads light and relaxed at the table: a pale solid-wood frame in mango, acacia or whitewashed wood, an airy silhouette such as cross-back, ladder-back, spindle or cane-back, and a seat in woven cane, rattan, rope or soft neutral linen. We build the look on a genuine solid-wood frame — never a particleboard shell — so it keeps its sun-bleached, seaside character while surviving daily pull-in, pull-out use in a beach-house kitchen or a seafront restaurant.
Which woods and finishes do you use for coastal dining chairs?
We favour lighter-toned woods — mango, acacia, rubberwood and pine — finished in whitewash, limewash, driftwood-grey, sun-bleached and natural-matt tones that suit a Hamptons, nautical or boho dining scheme. Darker sheesham can be whitewashed or cerused on request. All finishes are CARB / TSCA Title VI compliant and chosen to wear evenly in humid dining rooms and near open kitchens.
Are coastal dining chairs strong enough for restaurant and café use?
Yes. We reinforce the joinery on contract orders — corner blocks, through-tenons and bolt-through stretchers — and specify commercial-grade finishes and seat materials, so the chairs take heavy daily use in cafés, seafood restaurants, resort breakfast terraces and hotel dining rooms. Build, finish and seat material are matched across a full project so a room of chairs looks and wears as one.
What is the minimum order for wholesale coastal dining chairs?
A trial or sample order can ship LCL so you can approve the wood, weave and finish first. For best wholesale pricing thereafter, one 20ft full container load (FCL) is our standard minimum, and we consolidate coastal dining chairs with matching dining tables, benches and sideboards — or with mixed furniture and décor — into a single compliant container.
Can coastal dining chairs ship flat-pack or knocked down?
Yes. Many of our coastal dining chairs are engineered as knockdown / flat-pack (RTA) with bolt-together legs or stretchers, which cuts freight cost and transit breakage and lifts the chair count per container — ideal for large importers and online sellers. Fully assembled and part-assembled builds are also available.
Are your coastal dining chairs compliant for US and EU import?
Yes. We document FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of sheesham where used, with ISO, SGS and SEDEX / SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA finishes and ISPM-15 heat-treated export packing.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the silhouette, seat, finish, quantity and market. We confirm wood, finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time. Restaurant and resort buyers can brief us through our hospitality & contract furniture team.