Brass accent chairs, handcrafted in India — wholesale for importers, retailers and hospitality.
Warm brass legs, frames and accents, married to a solid-wood seat structure and your choice of upholstery, leather or cane. Manufacturer-direct, compliance-documented and container-ready — from a trial order up.
A brass accent chair reads as premium the moment it lands in a room.
Brass gives an accent chair the one thing particleboard seating never will — heft, a warm tone and a surface that can be mirror-bright or softly antique. It is the piece a designer reaches for to finish a hotel guest room, a boutique corner or a reading nook, and the piece a retailer margins up because it photographs like a hero. We build it honestly: brass does the visible metalwork, a solid-wood frame carries the load, and the seat is upholstered, leathered, caned or left in wood. Choose a ready design from our catalogue or hand us your own.
Brass on the outside, solid wood doing the work.
Brass appears on a chair in several ways — and each changes the price, the weight and the look. We match the construction to how you sell and ship it.
Cast & tubular brass frames
Sand-cast or spun tubular legs and arms carry the visible brass, with a sheesham or mango seat frame inside — the heaviest, most luxe build, ideal as a lobby or statement piece.
Brass accents on a wood chair
Polished brass feet, caps, sabots and inlay lift a carved solid-wood frame — lighter to ship, lower material cost, and an easy upsell across a seating range.
Sheet-clad & mixed metal
Brass sheet wrapped over a wood-cored structure, or brass paired with powder-coated wrought iron, for a contemporary look that can ship knock-down to raise container density.
Whatever the build, every chair carries at least one solid-wood component, so it survives commercial use. Read how the metal itself behaves — composition, finishes and care — on our brass material guide, or see the full seating range on the accent chairs hub.
One metal, many looks — matched to your sample before we cut a container.
Polished, brushed or antique
A mirror polish for a bright, luxe seat; a brushed satin that hides fingerprints; or a chemically aged antique tone for a consistent vintage look from day one.
Lacquered & plated
Clear lacquer seals the brass against tarnish, while nickel, chrome, black or gunmetal plating and powder-coat extend the palette for high-traffic contract floors.
Seat & wood pairings
Pair brass with full-grain or buffalo leather, your own upholstery fabric, hand-woven cane and rattan, or a shaped solid-wood seat in sheesham, mango or acacia.
Indicative specs — every dimension, metal finish and seat is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so seat height, frame build, brass finish and upholstery are all specified at the quote stage. Material and lot traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Metalwork | Cast, tubular/spun or sheet brass · accents, feet & inlay |
| Frame wood | Sheesham, mango, acacia, reclaimed/old wood |
| Seat & back | Upholstered · leather · woven cane/rattan · solid wood |
| Brass finish | Polished, brushed, antique, raw/living, lacquered, plated, powder-coat |
| Seat height | Approx. 42–48 cm (custom on request) |
| Overall height | Approx. 75–95 cm depending on style |
| Wood finish | Natural, stained, distressed, matt/satin lacquer — CARB/TSCA-compliant |
| Assembly | Assembled, part-assembled or knock-down / flat-pack (RTA) |
| Packing | Export carton · ISPM-15 · retail / FBA-ready on request |
Built for the floor, documented for the port.
Made for hospitality & retail
Brass is hard-wearing, corrosion-resistant and repairable, which makes a brass accent chair well suited to hotel guest rooms, lobbies, restaurants, cafés and boutique retail. We build to commercial-use expectations, QC each lot, and finish the metal for the wear your setting demands. See the full range we make for hotels, restaurants and bars.
Import-ready & easy to care for
Lacquered brass needs only a dry or barely-damp soft cloth — no abrasives or acidic cleaners that strip the seal; a living finish simply deepens, and can be polished bright and re-lacquered. On the paperwork side, the wood component and the container clear with FSC, Vriksh, EUDR-ready and CARB/TSCA documentation. See every certification we hold.
Brass accent chairs — wholesale & export FAQ
What is a brass accent chair made of?
Our brass accent chairs pair a brass metalwork element — cast or tubular legs, a sheet-clad frame, or polished accents and feet — with a solid-wood structure and an upholstered, leather, cane or wood seat. Every chair carries at least one solid-wood component (a sheesham or mango seat frame, carved arms or a wood-cored base); we do not supply plywood-only or panel seating. The brass is worked in the Moradabad metal cluster and assembled with our Jodhpur solid-wood lines.
Does the brass on an accent chair tarnish?
Bare brass develops a warm patina as copper reacts with air, and many buyers choose that living finish on purpose. Where a bright, stable look is required we apply a clear lacquer that seals the surface so it will not tarnish in normal indoor use, while antique and brushed finishes are aged deliberately so they read consistent from day one. We also plate or powder-coat brass for high-traffic contract settings.
What is the minimum order for wholesale brass accent chairs?
A trial or sample order can ship LCL (part-container) so you can approve the metal tone, finish, wood and comfort first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate brass accent chairs with other furniture, décor and metalware into a single mixed container.
Can you make brass accent chairs to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, dimensions, metal finish and upholstery, with custom CNC carving, your branding and retail-ready or Amazon-FBA packaging. Send a reference image or spec and we prototype to it before any production run.
Are your brass accent chairs compliant for US and EU import?
Yes. Brass itself is a metal, but the solid-wood component and the wider consolidated container still have to clear — so we document FSC chain-of-custody, Vriksh timber-legality and CITES-compliant sheesham handling, with ISO, SGS and SEDEX/SMETA audits, EN 10204 MTC-style material traceability, EUDR-ready due diligence, US Lacey Act support, UK Timber Regulation, CARB/TSCA finishes and ISPM-15 export packing.
What is the lead time for a brass accent chair order?
Typical production is 30–45 days after sample approval, depending on quantity, metal finish and upholstery. Urgent orders can be accommodated at a premium. We ship FOB or CIF from Mundra or Nhava Sheva.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, metal finish, quantity and market. We confirm the brass build, wood, upholstery, MOQ and a FOB/CIF price, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.