Rubberwood nightstands — the finish-anything bedside table, manufactured for export.
A dense, pale, fine-grained plantation hardwood that stains to read as walnut, oak, grey or warm teak — built as a genuine solid-wood nightstand with real drawers, not a veneered box, and at a price below premium rainforest timbers. Manufacturer-direct, compliance-documented and container-ready, from a trial order up.
A plantation hardwood that takes any colour — and any bed range with it.
A nightstand lives a hard, repetitive life: a drawer pulled every night, a lamp switched, a glass set down. Rubberwood handles it as a true solid-wood piece — dense and close-grained, with a Janka hardness around 960 lbf that holds drawer joinery and hardware far better than a particle-board carcass. What sets it apart is its pale, creamy base and even grain: it accepts stain so predictably that one rubberwood program can be finished to match walnut, oak, whitewash or a warm teak tone, letting you keep a whole bedroom range on-colour. It is a plantation by-product with a clean deforestation-free story, and it sits well below premium rainforest timbers on cost — the sweet spot between cheap veneered boxes and expensive hardwoods for retail bed ranges, hotel guest rooms and online bedroom catalogues. Choose a ready design from our catalogue or hand us your own; we build, finish and pack it to your market's standard.
Stains to any look
A pale, even blonde base takes tint predictably — finish it natural, whitewashed, grey, or stained to read as walnut, oak or teak, so a whole bed range stays on-colour.
Dense, screw-holding hardwood
A Janka hardness around 960 lbf, comparable to teak and harder than most pines, so drawer joinery, runners and hardware stay tight through nightly use.
Cost-advantaged & sustainable
A plantation by-product harvested after the tree's latex life — deforestation-free, and priced well below premium rainforest timbers for a genuine solid-wood SKU.
One timber, the full nightstand range.
Every nightstand carries a solid rubberwood carcass and drawer box; we pair it with the base, drawer front and hardware your channel sells. Mix styles across a single container, and consolidate with matching beds and dressers in the same finish.
Mid-century & brass-pull
Tapered legs, clean drawer fronts and brass or antique hardware — the warm, walnut-stained mid-century bedside piece.
Explore brass hardware & accents
Rubberwood & iron
Rubberwood tops and drawer fronts on powder-coated wrought-iron frames — the industrial bedside look that ships knock-down.
Explore wood & iron construction
Scandinavian & whitewash
Natural and whitewashed finishes that make the most of rubberwood's pale grain for light, airy bedroom ranges.
See all nightstand stylesIndicative specs — every dimension, drawer and finish is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so height, drawer count, drawer box, runners and hardware are all specified at the quote stage. Rubberwood is kiln-dried for stability and preservative-treated against fungi and borers before it is cut, and lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Wood | Solid rubberwood (Hevea brasiliensis) · Janka hardness ~960 lbf |
| Width | Approx. 40–55 cm (custom on request) |
| Depth | Approx. 35–45 cm |
| Height | Approx. 50–65 cm, sized to the mattress |
| Storage | One or two drawers, open shelf, cabinet door, or combination |
| Base | Turned or tapered rubberwood legs, solid plinth, or powder-coated wrought iron |
| Hardware | Brass, antique, iron or matte-black pulls · soft-close runners on request |
| Finish | Natural, whitewash, grey, or walnut / oak / teak stain · satin or gloss PU lacquer — CARB / TSCA-compliant |
| Use | Interior only · kiln-dried & preservative-treated |
| Assembly | Assembled, part-assembled or knock-down / flat-pack (RTA) |
| Packing | Export carton · ISPM-15 · retail / FBA-ready on request |
Where a rubberwood nightstand earns its place.
A finisher's wood
Rubberwood's pale, even base is its superpower at the finishing bench. Because the grain is subtle and mostly straight, stain lands uniformly with almost no blotching, so we can colour-match a whole bed range to a single reference: clear natural and whitewash for Scandinavian and coastal looks, walnut and espresso for mid-century warmth, grey and limed tones for modern ranges, and teak and oak stains where you need a premium hardwood read on a working budget. Satin and gloss PU lacquers give harder-wearing tops. All interior-market finishes are specified CARB / TSCA Title VI formaldehyde-compliant on request, matched to your reference or Pantone.
Rooms and channels it sells into
Matching bedside tables for retail and private-label bed programs that need consistent colour across every SKU; hard-wearing, cost-controlled nightstands for hotel, resort and serviced-apartment guest rooms; styled pieces for interior designers; and compact, flat-pack-friendly units for online sellers and dropship catalogues where freight and breakage matter. Because rubberwood is an interior timber, we specify it for bedrooms and indoor settings rather than outdoor or bathroom-wet use — pairing it with a harder or oil-rich wood where a program needs a water-exposed piece.
Nightstands that clear customs — not ones that sit at the port.
Rubberwood is a plantation by-product, harvested only after the tree ends its latex-producing life, which makes it one of the cleanest timber stories for today's import rules. We supply every nightstand with FSC chain-of-custody and Vriksh timber-legality documentation, EUDR-ready geolocation and deforestation-free due diligence, US Lacey Act declaration support and UK Timber Regulation readiness — all backed by ISO, SGS and SEDEX/SMETA audits and packed to ISPM-15. Certificate details go directly to serious buyers on request. See every certification and timber-legality document we hold.
| Requirement | How rubberwood nightstands are supplied |
|---|---|
| Timber legality | Vriksh verified · plantation-source |
| Sustainability | FSC chain-of-custody · latex-plantation by-product |
| EU market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Export packing | ISPM-15 heat-treated · knock-down options |
Questions buyers ask about rubberwood nightstands.
Why choose rubberwood for a nightstand?
Rubberwood (Hevea brasiliensis) is a dense, close-grained hardwood — a Janka hardness around 960 lbf, comparable to teak and harder than most pines — so it holds drawer joinery, screws and hardware firmly and resists the everyday dents a bedside table takes. Its biggest advantage for a nightstand is colour: raw rubberwood is a pale, creamy blonde with an even, mostly straight grain, so it stains predictably to read as walnut, oak, grey or warm teak. That lets you match a whole bed range to one spec, and it costs less than premium rainforest timbers — a genuine solid-wood piece at a price your channel can work with.
What sizes and configurations do your rubberwood nightstands come in?
Typical rubberwood nightstands run roughly 40–55 cm wide, 35–45 cm deep and 50–65 cm tall — sized to sit level with a mattress — with one or two drawers, an open shelf, a cabinet door, or a combination. We also build floating wall-mounted, two-drawer and tall three-drawer versions, with soft-close runners on request. Every dimension, drawer count, base and hardware choice is made to your drawing or market, so you can match an existing bed program or a hotel specification exactly.
Is rubberwood durable enough for a bedside table?
Yes, for indoor use. All of our export rubberwood is kiln-dried for stability and preservative-treated against fungi and borers, so it stays flat and sound for years in homes, hotels and serviced apartments. It is an interior timber — not naturally weather- or rot-resistant — so it is specified for bedrooms and indoor settings rather than outdoor or bathroom-wet use. Treated, finished and cared for normally, a rubberwood nightstand gives many years of reliable service.
Can you make rubberwood nightstands to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, dimensions, drawer box, runners, hardware, stain colour and private-label branding, with custom CNC detailing and retail-ready or Amazon-FBA packaging. Send a reference image or a spec sheet and we prototype a sample rubberwood nightstand to it before any container is built.
Are rubberwood nightstands eco-friendly and import-compliant?
Very. Rubberwood is harvested from plantation trees only after they end their roughly 25–30 year latex-producing life, so the timber is a by-product of an existing crop rather than a reason to clear forest — inherently plantation-sourced and deforestation-free. We supply it with FSC chain-of-custody and Vriksh timber-legality documentation, EUDR-ready geolocation and due diligence, US Lacey Act declaration support, UK Timber Regulation readiness and CARB / TSCA Title VI formaldehyde-compliant finishes, all packed to ISPM-15. Certificate details go to serious buyers on request.
How do you care for a rubberwood nightstand?
Keep it indoors, out of direct sun and away from radiators, vents and damp. Dust regularly and wipe with a soft, barely damp cloth, drying at once; use coasters and mats under hot or wet items; and avoid soaking, harsh solvents and prolonged humidity. A periodic furniture wax or polish keeps the finish even. We ship care guidance with every order so your buyers keep the piece looking new.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, stain colour, quantity and market. We confirm wood, finish, hardware, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.