Cane dining tables, handwoven in Jodhpur — wholesale for importers, retailers and hospitality.
Handwoven natural cane on kiln-dried solid-wood frames — sheesham, mango, acacia or reclaimed wood — with a timber dining top and the woven pedestal, apron and arch detailing buyers want. The coastal-and-resort look, built with the structure, compliance paperwork and container-readiness a serious import programme needs.
Woven cane for the look. Solid wood for the top and the load.
Cane is the thin, glossy outer skin peeled from the rattan palm — the same material as the classic webbing on chair backs and cabinet doors. On its own it is decorative, not structural, so it never belongs on a dining surface. We build the top from kiln-dried solid wood — sheesham, mango, acacia or reclaimed old wood — and weave the cane into the parts that carry the character: a round drum pedestal, a cabinet-style base, apron panels or curved leg arches. The timber carries every load and gives you a flat, wipe-clean eating surface; the cane gives the table its airy, light-filtering face and that unmistakable natural-fibre warmth. The result reads as genuine craft on a retail shelf and survives real service on a café floor — not a particle-board shell with a cane-print veneer.
The statement table that defines a coastal or boho range.
On-trend, broad appeal
Woven cane anchors the coastal, boho, Scandi-natural and resort dining schemes that dominate buying right now. A round cane-pedestal table suits an apartment nook, a boutique showroom, a café or a hotel breakfast room alike.
Light face, solid build
The open weave keeps the base visually light and the room breathable, while the kiln-dried timber top and frame deliver the flatness, moisture stability and strength a dining table has to have. Form without the bulk of a fully boxed-in base.
Honest, sellable craft
Handwoven panels on a solid-wood frame carry a sustainability and heritage story your customers pay for — a credible, deforestation-free alternative to mass-market particle-board dining furniture, and a natural companion to cane and rattan seating.
Indicative specs — every top, weave and finish is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so diameter, length, height, top thickness, base style and weave placement are all confirmed at the quote stage. Lot and finish traceability is documented where applicable, and a sample is produced before any production run.
| Attribute | Typical range / options |
|---|---|
| Top woods | Sheesham, mango, acacia, reclaimed wood (kiln-dried); sealed marble / stone insert optional |
| Cane detail | Handwoven natural cane on pedestal, cabinet base, apron panels or leg arches |
| Base / frame | Solid wood or powder-coated wrought iron |
| Round diameter | Approx. 90–150 cm · seats 2–6 |
| Rectangular length | Approx. 150–240 cm · seats 6–8 |
| Table height | Approx. 75–78 cm (custom on request) |
| Weave | Open or closed pattern · synthetic PE weave for covered-outdoor use |
| Finish | Natural, stained, distressed, matt / satin lacquer — CARB / TSCA-compliant |
| Assembly | Assembled, part-assembled or knock-down / flat-pack (RTA) |
| Packing | Export carton · ISPM-15 · retail / Amazon-FBA-ready on request |
Built for the room you're filling.
Retail & online
Flat-packed cane dining tables with a removable top and bolt-through base raise container density, cut freight per unit and protect the weave in transit — ideal for retailers and marketplace sellers. We pack retail-ready and Amazon-FBA-ready, under your brand, with ODM catalogue designs or your own via OEM. Pair them with matching cane accent chairs for a coordinated set.
Hospitality & contract
For cafés, bistros, bars and hotel dining we reinforce joints, double-weave high-wear panels and specify commercial-grade lacquer, so a cane dining table takes daily service. See how we build for hotel, restaurant and café projects.
Import-ready on every container
Our solid-wood frames ship with FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of Dalbergia sissoo (sheesham), backed by ISO, SGS and SEDEX / SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA formaldehyde-compliant finishes and ISPM-15 export packing — so your dining tables clear the port instead of sitting in it. See every certification we hold.
Care & longevity
The solid-wood top likes a soft dry wipe, no standing water and no direct heat, with an occasional re-oil or wax on waxed finishes. Natural cane on the base likes good air and an occasional light damp wipe; keep it out of direct rain and prolonged sun. A re-tightening of loosened weave is rare and simple. We tune finish, sheen and moisture spec to your destination market's humidity and share care guidance with every order, so your buyers keep the table selling for years.
Cane dining tables — wholesale & export FAQ
What is a cane dining table made of?
A cane dining table pairs a solid-wood top — sheesham, mango, acacia or reclaimed wood — with handwoven cane on the base, pedestal, apron or leg arches. You dine on timber, not on weave: the cane is the decorative, breathable face while kiln-dried solid wood carries the load. Every table has at least one genuine solid-wood component; we do not supply veneer or particle-board dining furniture.
Do you put cane on the tabletop itself?
No. A dining surface must take plates, spills and daily wiping, so our tops are always solid wood (optionally a sealed marble or stone insert). The cane lives where it belongs structurally and visually — woven into a round pedestal, a two-door sideboard-style base, apron panels or leg arches — giving the coastal, boho and resort look without compromising the eating surface.
What sizes and seating do cane dining tables come in?
Round cane-pedestal tables run roughly 90–150 cm in diameter seating two to six, and rectangular cane-base tables run 150–240 cm seating six to eight. Because we are the manufacturer, diameter, length, height, top thickness and weave placement are all made to your specification — send a drawing or reference and we build to it.
Are cane dining tables durable enough for restaurants and cafes?
Yes, when the frame does the work. The load sits on a kiln-dried solid-wood or wood-and-iron base, not on the weave, and for contract use we reinforce joints, double-weave high-wear panels and finish with hard-wearing CARB / TSCA-compliant lacquer. Café, bistro and hotel-dining cane tables are QC-checked for commercial durability before loading.
Can cane dining tables ship flat-pack to save freight?
Yes. Most cane dining tables ship knock-down (flat-pack / RTA) with a removable top and bolt-through base, which protects the weave, raises container density and cuts freight and breakage per unit — ideal for large importers and online sellers. Assembled builds are also available where you prefer them.
Are your cane dining tables compliant for US and EU import?
Yes. The solid-wood frames carry FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of sheesham; we are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA-compliant finishes and ISPM-15 heat-treated export packing.
Can you make cane dining tables to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, dimensions, weave pattern, finish and base style, with custom CNC-cut frames, your branding and retail-ready or Amazon-FBA-ready packaging. Send a reference image or spec and we prototype to it.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the shape, size, quantity and market. We confirm top wood, weave, finish, MOQ and a FOB / CIF price, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time. Browse the full dining-table range for other materials and styles, or quote this one now.