Cane accent chairs, hand-woven in Jodhpur — wholesale for importers, retailers and hospitality.
Hand-woven natural cane on kiln-dried solid-wood frames — sheesham, mango or acacia. The warm, breathable, boho-and-resort look buyers ask for, with the structure, compliance paperwork and container-readiness a serious import programme needs.
Woven cane for the look. Solid wood for the load.
Cane is the thin, glossy outer skin peeled from the rattan palm — the same material used for the classic woven webbing you see on chair backs and cabinet doors. On its own it is decorative, not structural. We hand-weave it onto a kiln-dried solid-wood frame, so the timber carries every seated kilogram while the cane gives the chair its airy, light-filtering face and that unmistakable natural-fibre warmth. The result reads as genuine craft on a retail shelf and survives real use on a hotel floor — not a particleboard shell with a cane-print veneer.
The high-margin seat that finishes a room — and sells itself.
On-trend, broad appeal
Woven cane anchors the boho, coastal, Scandi-natural and resort schemes that dominate living-room and hospitality buying. One silhouette suits a reading nook, a boutique corner, a café or a guest room.
Light, breathable comfort
The open weave keeps the chair visually and physically light — easy to move, cool to sit in warm climates, and forgiving of tight floor plans where an upholstered club chair would feel heavy.
Honest, sellable craft
Hand-woven panels on a solid-wood frame carry a sustainability and heritage story your customers pay for — a credible, deforestation-free alternative to mass-market particleboard seating.
Indicative specs — every frame wood, weave and finish is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so seat height, frame wood, weave density and finish are all confirmed at the quote stage. Lot and finish traceability is documented where applicable, and samples are produced before any production run.
| Attribute | Typical range / options |
|---|---|
| Frame woods | Sheesham, mango, acacia (kiln-dried) |
| Weave | Hand-woven natural cane webbing · open or closed pattern · synthetic PE for outdoor |
| Seat | Woven cane, upholstered cushion, or solid wood |
| Legs / base | Solid wood or powder-coated wrought iron |
| Seat height | Approx. 42–48 cm (custom on request) |
| Overall height | Approx. 75–95 cm depending on style |
| Finish | Natural, stained, distressed, matt/satin lacquer — CARB/TSCA-compliant |
| Assembly | Assembled, part-assembled or knock-down / flat-pack (RTA) |
| Packing | Export carton · ISPM-15 · retail / Amazon-FBA-ready on request |
Built for the room you're filling.
Retail & online
Light flat-packed cane chairs raise container density, cut freight per unit and protect the weave in transit — ideal for retailers and marketplace sellers. We pack retail-ready and Amazon-FBA-ready, under your brand, with ODM catalogue designs or your own via OEM.
Hospitality & contract
For lobbies, cafés, bars and guest rooms we reinforce joints, double-weave high-wear panels and specify commercial-grade lacquer, so a cane chair takes daily use. See how we build for hotel, restaurant and café projects.
Import-ready on every container
Our solid-wood frames ship with FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of Dalbergia sissoo, backed by ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA formaldehyde-compliant finishes and ISPM-15 export packing — so your seating clears the port instead of sitting in it. See every certification we hold.
Care & longevity
Natural cane likes an occasional light damp wipe and good air; keep it out of direct rain and prolonged sun. A re-tightening of loosened weave is rare and simple. The solid-wood frame moves with climate, so a stable indoor environment and a soft dry wipe keep it sound, with occasional wood wax protecting the finish. We share care guidance with every order so your buyers keep the chair selling for years.
Cane accent chairs — wholesale & export FAQ
What is a cane accent chair made of?
A cane accent chair is built around a kiln-dried solid-wood frame — sheesham, mango or acacia — with hand-woven cane webbing forming the back and often the seat. Cane is the glossy outer skin peeled from the rattan palm; it carries the look and breathability while the timber frame carries the load. Every chair has at least one solid-wood component; we do not supply plywood-only or panel seating.
Are cane accent chairs strong enough for hotels and restaurants?
Yes, when the frame does the work. We build on kiln-dried solid wood so weight is carried by the timber, not the weave, and for contract use we reinforce joints, double-weave high-wear panels and finish with hard-wearing CARB/TSCA-compliant lacquer. Lobby, café and guest-room cane seating is QC-checked for commercial durability.
Can cane accent chairs be used outdoors?
Natural cane and rattan are best for indoor or fully covered, shaded settings — verandas, conservatories, lobbies and poolside shade — away from direct rain and prolonged sun, which dry out and fade natural fibre. For open-air projects we build the same silhouettes in weather-resistant synthetic (PE) weave on powder-coated or solid-wood frames.
Can you make cane accent chairs to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, dimensions, weave pattern, finish and upholstery, with custom CNC-cut frames, your branding and retail-ready or Amazon-FBA packaging. Send a reference image or spec and we prototype to it.
What is the minimum order and lead time for wholesale cane chairs?
A trial or sample order can ship LCL (part-container) so you approve wood, weave and comfort first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate cane chairs with other furniture and décor into one mixed container. Typical lead time is 30–45 days after sample approval; urgent orders at a premium.
Do cane accent chairs ship flat-pack?
Many leg-based and wood-and-iron cane chairs ship knock-down (RTA), which protects the weave and raises container density — ideal for large importers and online sellers. Assembled and part-assembled options are also available. All solid-wood frames use ISPM-15 heat-treated export packing.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, quantity and market. We confirm frame wood, weave, finish, MOQ and a FOB/CIF price, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time. Browse the full accent-chair range for other materials, or quote this one now.