Coastal bar stools, handcrafted in Jodhpur — wholesale for resort, beach-house and boutique interiors.
Pale solid-wood frames in mango, acacia and whitewashed wood, with woven cane, rattan and rope seats on slim wood and powder-coated iron legs — counter, bar and spectator heights that finish a seaside scheme and seat a real bar. Manufacturer-direct, compliance-documented and flat-pack container-ready, from a trial order up.
Pale wood, a woven seat and soft natural texture — the perch that lightens a seaside bar.
Coastal styling is about lightness and ease: bleached and driftwood tones, natural cane and rattan, rope-wrapped detailing and a palette drawn from sand, sea glass and weathered timber. A coastal bar stool is where that look meets a piece that is sat on, leaned back in and scuffed by footwear every day — the island stool in a beach-house kitchen, the counter seat in a boutique hotel café, the lounge perch in a resort bar. We build it on real solid-wood legs — kiln-dried, properly joined, braced where the load concentrates — with a woven cane, rattan, rope or natural-upholstered seat, a comfortable footrest that takes the wear, and backless, low-back or curved-back shapes. So it keeps its airy character on your retail floor and survives years of perching, dragging and spills, instead of wobbling, swelling or peeling after one humid season.
Choose the seat, frame and height your channel sells — built on solid-wood legs.
Cane & rattan seat stools
Hand-woven cane and rattan seats on light mango or acacia legs — the breezy resort and boho counter perch.
Explore cane & rattan stools
Whitewashed & driftwood stools
Limewashed, sun-bleached and driftwood-grey frames in mango and acacia — the pale, airy Hamptons tone at volume.
Explore mango-wood stools
Rope & jute seat stools
Rope-wound and jute-trimmed seats over solid-wood frames — nautical texture that sells a seaside story.
Explore jute & natural-fibre seatsBackless & saddle-seat stools
Tuck-under backless and contoured saddle seats in warm acacia — space-saving perches for island and café runs.
Explore acacia-wood stoolsWood & iron coastal stools
Pale timber seats on slim, rust-resistant powder-coated iron legs with a metal footrest — a lighter take on the industrial perch.
Explore wood & iron stoolsResort & contract bar stools
Swivel and fixed stools QC-checked for commercial, humid-climate strength and daily high-traffic use.
Coastal bar stools for hospitalityIndicative specs — every wood, seat and height is made to your order.
Figures below are typical wholesale ranges for reference. A coastal bar stool is daily seating, so the seat, footrest and legs are specified around real use — but we manufacture to your exact drawings and market requirements, so frame wood, seat material, finish tone, height, back shape and swivel are all confirmed at the quote and sample stage. Match seat height to the top: allow roughly 10–12 in (25–30 cm) between the seat and the underside of the counter or bar for comfortable legroom. Lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Frame woods | Mango, acacia, rubberwood, pine; whitewashed sheesham on request |
| Seat | Woven cane / rattan · rope-wound · natural upholstery · solid wood (round, saddle, square) |
| Legs & footrest | Turned or tapered solid wood, or slim powder-coated wrought iron, with an integral footrest |
| Counter stool | Approx. 24–26 in · 61–66 cm seat height — suits 35–37 in · 89–94 cm tops |
| Bar stool | Approx. 29–31 in · 74–79 cm seat height — suits 40–42 in · 102–107 cm tops |
| Spectator / extra-tall | Approx. 33–36 in · 84–91 cm seat height — suits raised & poseur bars |
| Back & motion | Backless, low-back or curved-back; fixed or swivel |
| Finishes | Whitewash, limewash, driftwood-grey, sun-bleached, natural matt — CARB / TSCA compliant |
| Form | Knock-down / flat-pack (RTA) for container density, or fully assembled |
| MOQ | LCL trial / sample order; 1× 20ft FCL minimum thereafter for best pricing |
| Lead time | 30–45 days typical after sample approval; urgent orders at a premium |
| Shipping terms | FOB / CIF from Mundra or Nhava Sheva, India; ISPM-15 heat-treated packing |
Built to perch through humid lounges — and past your customs broker.
Import-ready on every container
Our coastal bar stools ship with FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of sheesham where used, backed by ISO, SGS and SEDEX / SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA finishes and ISPM-15 export packing — so your stools clear the port instead of sitting in it. See every certification we hold.
Care in a coastal climate
Light woods and natural weave prefer stable, well-ventilated rooms. We kiln-dry the timber to a stable moisture level and seal it with moisture-tolerant lacquers, so frames stay tight under daily perching; a soft dry wipe and an occasional wood feed keep the pale finish even, while cane, rattan and rope seats stay taut with a light damp wipe and good airflow. Wipe spills promptly and keep footrests clean of grit, as that is where wear concentrates. For salt-air floors we specify rust-resistant powder-coated iron and braced joinery for commercial strength. We share care and assembly guidance with every order so your buyers keep the stools selling for years. Compare wood options in our solid-wood materials guide.
Coastal bar stools — wholesale & export FAQ
What makes a bar stool coastal?
A coastal bar stool reads light, breezy and relaxed: a pale solid-wood frame in mango, acacia or whitewashed wood, often with a woven cane or rattan seat, a rope-wrapped or natural-fibre detail, and a palette drawn from sand, driftwood and sea glass. The look is airy and casual rather than heavy or formal, with slim turned or tapered legs, a comfortable footrest, and backless, low-back or curved-back shapes. We build that look on a genuinely sturdy kiln-dried, properly joined frame so it holds up to daily perching at a kitchen island, home bar, café counter or resort lounge.
Which woods and finishes do you use for coastal bar stools?
We favour lighter-toned woods — mango, acacia, rubberwood and pine — finished in whitewash, limewash, driftwood-grey, sun-bleached and natural-matt tones that suit a Hamptons, nautical or boho scheme. Darker sheesham can be whitewashed or cerused on request. Woven cane and rattan seats, rope-wrapped seats and natural upholstery pair with these frames. All finishes are CARB / TSCA Title VI formaldehyde-compliant and chosen to wear evenly in the humid, high-traffic rooms where coastal seating lives.
What seat heights do coastal bar stools come in?
We make three standard heights: counter stools at roughly 24–26 in (61–66 cm) seat height for 36 in kitchen islands and café counters, bar stools at roughly 29–31 in (74–79 cm) for 40–42 in bar tops, and spectator or extra-tall stools at 33–36 in (84–91 cm) for raised and poseur bars. Allow about 10–12 in (25–30 cm) between the seat and the underside of the top for legroom. We also build to your exact seat height for contract and hospitality projects.
Do coastal bar stools ship flat-pack to save freight?
Yes — a bar stool is mostly legs, a seat and a footrest, so it is an ideal knock-down / flat-pack (RTA) piece. Shipping frames and seats knocked down raises container density, cuts freight per unit and reduces transit breakage, with simple bolt-together assembly and guidance included. We also supply fully assembled stools where your channel prefers them.
What is the minimum order for wholesale coastal bar stools?
A trial or sample order can ship LCL (part-container) so you can approve the wood, weave, finish and height first. For best wholesale pricing thereafter, one 20ft full container load (FCL) is our standard minimum, and we consolidate coastal bar stools with bar carts, dining chairs, console tables and décor into a single mixed container.
Are your coastal bar stools compliant for US and EU import?
Yes. We document FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of sheesham where used, with ISO, SGS and SEDEX / SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA finishes and ISPM-15 export packing.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, seat material, finish, height, quantity and market. We confirm wood, finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and flat-pack or assemble to your standard on a 30–45 day lead time. Resort and hospitality buyers can brief us through our hospitality & contract furniture team, or pair the stools with matching coastal bar carts in one container.