Mango wood armchairs — solid-hardwood lounge seating, manufactured for export.
A dense, cost-advantaged hardwood with a lustrous grain and a deforestation-free orchard story — built as a genuine solid-wood armchair frame, not a particleboard shell. Manufacturer-direct, compliance-documented and container-ready, from a trial order up to repeat volumes.
The lounge chair that reads as craft — on a hardwood frame you can stand behind.
An armchair anchors a room and carries a margin — a reading corner, a hotel lobby, a café nook, a reception floor, a boutique bedroom. Built in mango, it bridges the gap between cheap softwood seating and premium rosewood: real frame density, a characterful grain that sells on the shelf and online, and orchard-sourced timber that keeps your range solid wood and deforestation-free. Every piece carries a solid mango-wood frame; we pair it with the seat, back, arms and upholstery your channel sells. Choose a ready design from our catalogue or hand us your own — we build, finish and pack it to your market's standard.
Hard and hard-wearing
A Janka hardness near 1,070 lbf puts mango alongside walnut and most oak — dense enough to hold joints tight through the daily sitting of retail, hospitality and contract floors.
Clean to carve & turn
Mango machines, turns and CNC-carves cleanly, so shaped arms, tapered legs, curved aprons and spindle backs come out crisp and repeatable across a production run.
A sustainability story
Harvested from spent fruit orchards on a replant cycle — a by-product of existing agriculture, documented with FSC chain-of-custody and Vriksh timber-legality.
One timber, the full armchair range.
Every chair starts from a solid mango-wood frame; we pair it with the seat, back and covering your buyers want. Mix styles across a single mixed container.
Mango & leather club chairs
Full-grain or buffalo leather over a carved mango club or barrel frame — the high-value hospitality and retail staple.
Explore leather & upholstery materials
Mango & cane armchairs
Hand-woven cane backs and seats on a mango frame — the airy, breathable boho and resort look buyers keep asking for.
Explore cane & rattan seating
Mango & iron armchairs
Solid mango seats and arms on powder-coated wrought-iron frames — industrial lounge seating that ships knock-down.
Explore wood & iron seatingIndicative specs — every dimension and finish is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so seat height, arm profile, frame section, finish and upholstery are all specified at the quote stage. Mango is kiln-dried for stability before joinery, and lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Frame wood | Solid mango (Mangifera indica) · ~1,070 lbf Janka |
| Seat & back | Solid mango · woven cane/rattan · upholstered · leather |
| Arms / legs | Carved or turned mango, or powder-coated wrought iron |
| Styles | Club, lounge, barrel, wingback, carved occasional, industrial wood & iron |
| Seat height | Approx. 40–48 cm (16–19 in), custom on request |
| Overall width | Approx. 60–85 cm (24–33 in) |
| Overall height | Approx. 75–110 cm (30–43 in), style-dependent |
| Finish | Natural oil/wax, satin or gloss PU lacquer, stain, distressed — CARB/TSCA-compliant |
| Assembly | Assembled, part-assembled or knock-down / flat-pack (RTA) |
| Packing | Export carton · ISPM-15 · retail / FBA-ready on request |
Where a mango armchair earns its place.
A finisher's wood
Mango's open, receptive grain carries everything from pale limewash to deep espresso cleanly. We supply natural matte oil and wax for the on-trend organic look, satin and gloss PU lacquer for harder-wearing contract surfaces, hand-distressed and antique tones, walnut and grey stains, and two-tone or metal-banded looks paired with iron. All interior-market finishes are specified CARB / TSCA Title VI formaldehyde-compliant on request, matched to your reference or Pantone. Leather and fabric coverings are selected to suit residential or commercial wear.
Rooms and channels it sells into
Living-room reading corners and bedroom lounge chairs for retail ranges; lobbies, guest rooms, cafés, bars and reception floors for hospitality and contract buyers; styled statement seating for interior designers; and compact, flat-pack-friendly SKUs for online sellers and dropship catalogues. Because mango is not naturally rot-resistant, we build these for indoor use — for covered outdoor or poolside seating, acacia or teak is the better specification.
Mango seating that clears customs — not one that sits at the port.
Because mango comes from managed orchards rather than forest, it is a natural fit for today's import rules. We supply every armchair with FSC chain-of-custody and Vriksh timber-legality documentation, EUDR-ready geolocation and deforestation-free due diligence, US Lacey Act declaration support and UK Timber Regulation readiness — all backed by ISO, SGS and SEDEX/SMETA audits and packed to ISPM-15. Certificate details go directly to serious buyers on request and are never published. See every certification and timber-legality document we hold.
| Requirement | How mango armchairs are supplied |
|---|---|
| Timber legality | Vriksh verified · orchard-sourced |
| Sustainability | FSC chain-of-custody · orchard by-product |
| EU market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Export packing | ISPM-15 heat-treated · knock-down options |
Questions buyers ask about mango wood armchairs.
Why choose mango wood for an armchair frame?
Mango (Mangifera indica) is a dense tropical hardwood — a Janka hardness around 1,070 lbf, close to black walnut and most oak — so a mango armchair frame carries a sitter's weight and years of lobby or living-room use without the flex and fastener-loosening of a particleboard or softwood build. It machines, turns and CNC-carves cleanly for shaped arms, tapered legs and curved aprons, takes stain and lacquer evenly, and shows a lustrous, richly figured grain that lifts a club or lounge chair on the shelf and online. Because the timber comes from spent fruit orchards on a replant cycle, it is a genuine solid wood with a deforestation-free story your buyers can stand behind.
What is the minimum order for wholesale mango wood armchairs?
A trial or sample order can ship LCL (part-container) so you approve the frame, finish and comfort first. For best wholesale pricing thereafter, one 20ft full container load (FCL) is our standard minimum, and we consolidate mango armchairs with sofas, benches, tables and décor into a single mixed container. Typical lead time is 30–45 days after sample approval, with urgent orders at a premium.
Can you make mango wood armchairs to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, dimensions, seat height, arm profile, finish and upholstery, with custom CNC carving, your branding and retail-ready, Amazon-FBA-ready or gift packaging. Send a reference image or a spec sheet and we prototype a sample armchair in mango to it.
Are mango wood armchairs compliant for US and EU import?
Yes. We document FSC chain-of-custody and Vriksh timber-legality, backed by ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA Title VI formaldehyde-compliant finishes and ISPM-15 export packing. Certificate details are shared directly with serious buyers on request, never published.
Can mango wood armchairs ship knock-down to save freight?
Many leg-based and wood-and-iron mango armchairs ship knock-down (RTA) with bolt-on legs or arms to raise container density and cut breakage and freight — ideal for large importers and online sellers. Fully assembled and part-assembled builds are available where a carved or one-piece lounge frame calls for it.
Are mango wood armchairs suitable for hotels, cafés and contract use?
Yes. We build club, lounge and barrel armchairs in solid mango with commercial-grade joinery and QC on every piece, finished in hard-wearing PU lacquer or contract-grade leather and fabric. Because mango is not naturally rot-resistant we build these for indoor use; for covered outdoor or poolside seating, acacia or teak is the better call.
How do you care for a mango wood armchair?
Keep it indoors, out of direct sun and away from radiators or vents to limit drying and movement. Dust regularly and wipe with a soft, barely damp cloth, drying at once; feed oiled or waxed frames with a suitable wood wax a few times a year, while lacquered and PU-sealed frames need only dusting. Condition leather periodically and spot-clean fabric per its care label. We ship care and assembly guidance with every order.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, quantity and market. We confirm wood, finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.