Coastal armchairs, handcrafted in Jodhpur — wholesale for resort, boutique and seaside interiors.
Light solid-wood frames in mango, acacia and whitewashed wood, paired with woven cane, rattan, rope and soft linen — relaxed lounge and club armchairs that finish a coastal scheme. Manufacturer-direct, compliance-documented and container-ready, from a trial order up.
Pale wood, a woven or linen seat and easy lounge proportions — the chair that anchors a seaside room.
Coastal styling is about lightness and ease: bleached and driftwood tones, natural weave, low relaxed lines and a palette drawn from sand, rope and sea glass. Where an accent chair is a small occasional seat, a coastal armchair is the generous lounge piece a guest sinks into — the reading chair in a beach-house corner, the club chair in a resort lobby, the paired lounge seating around a veranda coffee table. We build that look on a genuine solid-wood frame — kiln-dried, properly joined and sealed — so it keeps its relaxed character on your retail floor and survives years of daily sitting, instead of warping or peeling after one humid season.
Choose the weave, wood and silhouette your channel sells — built on a solid-wood frame.
Cane & rattan armchairs
Hand-woven cane backs and rattan panels on light mango or acacia frames — the breezy resort and boho lounge look.
Explore cane & rattan seating
Whitewashed & driftwood armchairs
Limewashed, sun-bleached and driftwood-grey finishes on mango and acacia — the pale, airy Hamptons tone.
Explore mango-wood seating
Rope & jute woven armchairs
Natural jute and rope-wrapped seats and backs over solid-wood frames — texture that anchors a nautical lounge.
Explore jute & natural-fibre seatingLinen-upholstered coastal armchairs
Soft neutral linen, canvas or your own fabric over light carved frames — the relaxed, deep-seat lounge silhouette.
Explore acacia-wood seatingWood & metal coastal armchairs
Pale solid-wood seats and arms on powder-coated, rust-resistant iron frames — ship knock-down for container density.
Explore wood & iron seatingResort & contract coastal armchairs
Lobby, lounge, veranda and guest-suite armchairs QC-checked for commercial, humid-climate durability.
Coastal armchairs for hospitalityIndicative specs — every wood, weave and finish is made to your order.
Figures below are typical ranges for reference. Because coastal armchairs are lounge pieces, seat depth and width run generous — but we manufacture to your exact drawings and market requirements, so frame wood, weave pattern, finish tone and dimensions are all confirmed at the quote and sample stage. Lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Frame woods | Mango, acacia, rubberwood, pine; whitewashed sheesham on request |
| Seat & back | Woven cane / rattan · rope / jute · linen or canvas upholstery · solid wood |
| Finishes | Whitewash, limewash, driftwood-grey, sun-bleached, natural matt — CARB / TSCA compliant |
| Legs / base | Solid wood or powder-coated, rust-resistant wrought iron |
| Seat height | Approx. 40–45 cm (16–18 in), custom on request |
| Overall width | Approx. 65–85 cm (26–33 in), lounge proportions |
| Overall height | Approx. 75–100 cm depending on silhouette |
| Form | Assembled, part-assembled or knock-down / flat-pack (RTA) |
| MOQ | LCL trial / sample order; 1× 20ft FCL minimum thereafter for best pricing |
| Lead time | 30–45 days typical; urgent orders at a premium |
| Shipping terms | FOB / CIF from Mundra or Nhava Sheva, India |
| Packing | Export carton · ISPM-15 heat-treated · retail / FBA-ready on request |
Built for humid lounges — and for your customs broker.
Import-ready on every container
Our coastal armchairs ship with FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of sheesham where used, backed by ISO, SGS and SEDEX / SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA finishes and ISPM-15 export packing — so your seating clears the port instead of sitting in it. See every certification we hold.
Care in a coastal climate
Light woods and natural weave prefer stable, well-ventilated rooms. We kiln-dry frames and seal them with moisture-tolerant lacquers; a soft dry wipe and an occasional wood feed keep the pale finish even, while cane and rope stay taut with a light damp wipe and good airflow. Linen and canvas seats should be spot-cleaned per the care label, and for salt-air floors we specify rust-resistant hardware and powder-coated iron. We share care and assembly guidance with every order so your buyers keep the chair selling for years. Compare wood options in our solid-wood materials guide.
Coastal armchairs — wholesale & export FAQ
What makes an armchair coastal?
A coastal armchair reads light, low and relaxed: a pale solid-wood frame in mango, acacia or whitewashed wood, generous lounge proportions, and a seat in woven cane, rattan, rope or soft neutral linen. We build the look on a genuine solid-wood frame — never a particleboard shell — so it keeps its airy resort character while holding up to daily lounging in a hotel lobby or living room.
Which woods and finishes do you use for coastal armchairs?
We favour lighter-toned woods — mango, acacia, rubberwood and pine — finished in whitewash, limewash, driftwood-grey, sun-bleached and natural-matt tones that suit a seaside, Hamptons or boho scheme. Darker sheesham can be whitewashed or cerused on request. All finishes are CARB / TSCA Title VI compliant and chosen to wear evenly in humid rooms.
Can coastal armchairs handle humid or seaside interiors?
They are built for indoor and covered coastal rooms — guest suites, lobbies, lounges, verandas under cover and cafés near the water. We kiln-dry the wood to a stable moisture content, seal frames with moisture-tolerant lacquers, and can specify powder-coated, rust-resistant wrought iron for salt-air floors. They are not intended for fully exposed outdoor use.
What is the minimum order for wholesale coastal armchairs?
A trial or sample order can ship LCL so you can approve the wood, weave and finish first. For best wholesale pricing thereafter, one 20ft full container load (FCL) is our standard minimum, and we consolidate coastal armchairs with sofas, benches, accent chairs and décor into a single mixed container.
Can you make coastal armchairs to our own design or private label?
Yes. We work as ODM (our catalogue designs) and OEM — building to your drawings, dimensions, weave pattern, finish and fabric, with custom CNC detailing, your branding and retail-ready, Amazon-FBA-ready or gift packaging. Send a reference image or spec and we prototype to it.
Are your coastal armchairs compliant for US and EU import?
Yes. We document FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of sheesham where used, with ISO, SGS and SEDEX / SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA finishes and ISPM-15 export packing.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, weave, finish, quantity and market. We confirm wood, finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time. Hospitality and resort buyers can brief us through our hospitality & contract furniture team.