Coastal accent chairs, handcrafted in Jodhpur — wholesale for resort, boutique and seaside interiors.
Light solid-wood frames in mango, acacia and whitewashed wood, paired with woven cane, rattan, rope and jute — relaxed, airy seating that finishes a coastal scheme. Manufacturer-direct, compliance-documented and container-ready, from a trial order up.
Pale wood, a woven seat and relaxed lines — the airy seat that sells a seaside scheme.
Coastal styling is about lightness: bleached and driftwood tones, natural weave, soft curves and a palette that borrows from sand, rope and sea glass. Buyers reach for a coastal accent chair to finish a resort guest room, a beach-house reading corner, a boutique lobby or a café by the water. We build that look on a genuine solid-wood frame — kiln-dried, joined and sealed to last — so it keeps its relaxed character on a retail shelf and holds up to commercial use, instead of warping or peeling after one humid season.
Choose the weave and wood your channel sells — we build it on a solid-wood frame.
Cane & rattan coastal chairs
Hand-woven cane backs and rattan seats on light mango or acacia frames — the breezy resort and boho look.
Explore cane & rattan seating
Whitewashed & driftwood chairs
Limewashed, sun-bleached and driftwood-grey finishes on mango and acacia — the pale, airy Hamptons tone.
Explore mango-wood seating
Rope & jute woven chairs
Natural jute and rope-wrapped seats and backs over solid-wood frames — texture that anchors a nautical scheme.
Explore jute & natural-fibre seatingLinen-upholstered coastal chairs
Soft neutral linen, canvas or your own fabric over light carved frames — the relaxed lounge silhouette.
Explore acacia-wood seatingWood & metal coastal chairs
Pale solid-wood seats on powder-coated, rust-resistant iron frames — ship knock-down for density.
Explore wood & iron seatingResort & contract coastal chairs
Lobby, veranda, café and guest-room coastal seating QC-checked for commercial, humid-climate durability.
Coastal chairs for hospitalityIndicative specs — every wood, weave and finish is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so frame wood, weave pattern, finish tone and seat height are all specified at the quote stage. Lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Frame woods | Mango, acacia, rubberwood, pine; whitewashed sheesham on request |
| Seat & back | Woven cane/rattan · rope/jute · linen or canvas upholstery · solid wood |
| Finishes | Whitewash, limewash, driftwood-grey, sun-bleached, natural matt — CARB/TSCA-compliant |
| Legs / base | Solid wood or powder-coated, rust-resistant wrought iron |
| Seat height | Approx. 40–46 cm (custom on request) |
| Overall height | Approx. 72–90 cm depending on silhouette |
| Assembly | Assembled, part-assembled or knock-down / flat-pack (RTA) |
| Packing | Export carton · ISPM-15 · retail / FBA-ready on request |
Built for humid rooms — and for your customs broker.
Import-ready on every container
Our coastal accent chairs ship with FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of sheesham where used, backed by ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA finishes and ISPM-15 export packing — so your seating clears the port instead of sitting in it. See every certification we hold.
Care in a coastal climate
Light woods and natural weave love stable, well-ventilated rooms. We kiln-dry frames and seal them with moisture-tolerant lacquers; a soft dry wipe and occasional wood feed keep the pale finish even, while cane and rope benefit from a light damp wipe and air to stay taut. For salt-air floors we specify rust-resistant hardware and iron. We share care guidance with every order so your buyers keep the chair selling for years.
Coastal accent chairs — wholesale & export FAQ
What makes an accent chair coastal?
A coastal accent chair reads light and airy: a pale solid-wood frame in mango, acacia or whitewashed wood, a woven seat in natural cane, rattan, rope or jute, relaxed low-slung lines, and a soft neutral palette. We build the look on a genuine solid-wood frame — never a particleboard shell — so it keeps that relaxed resort character while surviving commercial use.
Which woods and finishes do you use for coastal chairs?
We favour lighter-toned woods — mango, acacia, rubberwood and pine — plus whitewashed, limewashed, driftwood-grey, sun-bleached and natural-matt finishes that suit a seaside or Hamptons scheme. Darker sheesham can be whitewashed or cerused on request. All finishes are CARB/TSCA-compliant and chosen for humid-climate wear.
Can coastal accent chairs handle humid or seaside interiors?
They are made for indoor coastal rooms — guest suites, verandas under cover, lobbies and cafés. We kiln-dry the wood to a stable moisture content, seal frames with moisture-tolerant lacquers, and can specify powder-coated wrought-iron or rust-resistant hardware for salt-air environments. They are not intended for fully exposed outdoor use.
What is the minimum order for wholesale coastal accent chairs?
A trial or sample order can ship LCL so you can approve wood, weave and finish first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate coastal chairs with other accent seating, décor and metalware into a single mixed container.
Can you make coastal chairs to our own design or private label?
Yes. We work as ODM (our catalogue designs) and OEM — building to your drawings, dimensions, weave pattern, finish and fabric, with custom CNC detailing, your branding and retail-ready or Amazon-FBA packaging. Send a reference image or spec and we prototype to it.
Are your coastal accent chairs compliant for US and EU import?
Yes. We document FSC chain-of-custody, Vriksh timber-legality and CITES-compliant sheesham handling, with ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA finishes and ISPM-15 export packing.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, weave, finish, quantity and market. We confirm wood, finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.