Cane room dividers, hand-woven in Jodhpur — wholesale folding screens for importers, retailers and hospitality.
Hand-woven cane panels on kiln-dried sheesham, mango and acacia frames — the light, airy folding screen that zones a room without blocking the daylight. The coastal, boho and resort look buyers ask for, built with the structure, compliance paperwork and container-readiness a serious import programme needs.
Woven cane for the panels. Solid wood for the frame.
Cane is the thin, glossy outer skin peeled from the rattan palm — the same material used for the classic woven webbing on chair backs and cabinet doors. On its own it is decorative, not structural. We hand-weave it into each panel of a kiln-dried solid-wood folding frame, so the timber and its mortise-and-tenon joints carry the hinges and the standing load, while the cane gives the screen its translucent, light-filtering face and natural-fibre warmth. Unlike a carved jali or a slatted wood screen, a cane divider is remarkably light to move and lets both air and soft daylight pass through — it separates a space without closing it in. It reads as genuine craft on a retail shelf and survives real use in a hotel suite or an open-plan office, not a particleboard screen with a cane-print veneer.
The high-margin screen that zones a room — and sells itself.
On-trend, broad appeal
Woven cane panels anchor the coastal, boho, Scandi-natural and resort schemes that dominate living-room, bedroom and hospitality buying. One screen suits a home lounge, a boutique fitting area, a café nook or a hotel suite.
Light, airy, movable
The open weave divides a space while keeping it bright — screening a bed, a workspace or a dining zone without the heaviness of a solid partition. Folding panels are light to reposition and fold flat against a wall when not in use.
Honest, sellable craft
Hand-woven panels on a solid-wood frame carry a sustainability and heritage story your customers pay for — a credible, deforestation-free alternative to mass-market particleboard and printed-panel screens.
Indicative specs — every frame wood, weave and finish is made to your order.
Figures below are typical wholesale ranges for reference. We manufacture to your exact drawings and market requirements, so panel count, frame wood, weave density, infill mix and finish are all confirmed at the quote stage. Lot and finish traceability is documented where applicable, and a sample is produced before any production run.
| Attribute | Typical range / options |
|---|---|
| Frame woods | Solid sheesham, mango, acacia (kiln-dried); reclaimed/old wood on request |
| Woven panels | Hand-woven natural cane webbing · open or closed pattern · synthetic PE weave for humid/outdoor |
| Panel counts | 3, 4 or 6 folding panels; fixed & made-to-spec partitions |
| Panel width | 40–50 cm per panel (custom on request) |
| Height | 150–180 cm folding screens; partition heights to drawing |
| Deployed width | Approx. 120–300 cm depending on panel count |
| Construction | Solid-wood frame, mortise & tenon; brass or iron hinges |
| Detailing | Carved, slatted or bone-inlay rails; two-tone frame on request |
| Finish | Natural, honey, stained, distressed, white-wash, painted — CARB / TSCA Title VI compliant |
| Assembly | Folds flat; knock-down / flat-pack (RTA) partitions to raise container density |
| Packing | Export carton · ISPM-15 heat-treated · retail / Amazon-FBA-ready on request |
| MOQ | Sample/trial via LCL; 1× 20ft FCL for best pricing; mixed containers supported |
| Lead time | 30–45 days typical; urgent orders at premium |
| Incoterms | FOB / CIF from Mundra / Nhava Sheva |
| Model | ODM (our designs) + OEM (your drawings, finish & private label) |
Built for the room you're filling.
Retail & online
Folding cane screens fold flat by design, so they ship dense, cut freight per unit and arrive with the woven panels protected — ideal for retailers and marketplace sellers. We pack retail-ready and Amazon-FBA-ready, under your brand, with ODM catalogue designs or your own via OEM.
Hospitality & contract
For hotel suites, spas, restaurants and lounges we specify tall partition heights, reinforce hinge and frame joints and double-weave high-wear panels, so a cane screen zones a space and takes daily use. See how we build for hotel, restaurant and café projects.
Import-ready on every container
Our solid-wood frames ship with FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of Dalbergia sissoo (sheesham), backed by ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA formaldehyde-compliant finishes and ISPM-15 export packing — so your screens clear the port instead of sitting in it. See every certification we hold.
Care & longevity
Natural cane likes good air and an occasional light damp wipe; dust the weave with a soft brush, keep the screen out of direct rain and prolonged sun, and give the solid-wood frame a wax or oil refresh once or twice a year. If a panel loosens over time, a light mist on the underside of the weave and air-drying restores the spring — a rare and simple fix. We share full care and finish guidance with every order so your buyers keep the screen selling for years.
Specify the right fibre for the setting.
Natural cane is the authentic, premium choice for indoor and covered rooms. For open-air zoning, poolside cabanas and high-humidity spaces we build the same folding screen in weather-resistant synthetic (PE) weave, so a single collection can run both an indoor natural line and an outdoor-ready line. Prefer carved or slatted wood instead? Browse the full room divider range for other materials and styles.
| Consideration | Natural cane | Synthetic (PE) weave |
|---|---|---|
| Best use | Indoor & covered rooms | Open-air & poolside |
| Look | Authentic, warm, premium | Cane-look, uniform |
| Weather | Protect from rain & sun | UV & water resistant |
| Frame | Solid wood | Solid wood or powder-coated metal |
| Sustainability | Renewable natural fibre | Durable, recyclable polymer |
Cane room dividers — wholesale & export FAQ
What is a cane room divider made of?
A cane room divider is a folding screen built on a kiln-dried solid-wood frame — sheesham (Indian rosewood), mango or acacia — with hand-woven cane webbing set into each panel. Cane is the glossy outer skin peeled from the rattan palm; it forms the light, breathable, light-filtering infill while the timber frame, mortise-and-tenon joints and hinges carry the structure. Every divider has a solid-wood frame; we do not supply plywood or panel-board screens.
What sizes and panel counts do cane room dividers come in?
Standard folding screens run 3, 4 or 6 panels, each panel typically 40–50 cm wide and 150–180 cm tall, giving a deployed width of roughly 120–300 cm. The woven cane fills most of the panel, often with a solid-wood rail top and bottom. Fixed and partition-height screens are made to your drawing. Every dimension, panel count, hinge type and finish is confirmed on an approved sample before production.
Can cane room dividers be used in humid rooms or outdoors?
Natural cane is best suited to indoor or fully covered, shaded settings — lounges, lobbies, bedrooms, spas and covered verandas — away from direct rain and prolonged sun, which dry out and fade natural fibre. For open-air zoning, poolside cabanas or high-humidity rooms we build the same folding-screen silhouette in weather-resistant synthetic (PE) weave on a solid-wood or powder-coated frame.
Can you make cane room dividers to our own design or private label?
Yes. We work as both ODM, from our own catalogue, and OEM — manufacturing to your drawings, panel count, weave pattern, frame finish and hardware, with custom CNC-cut frames, your branding and retail-ready or Amazon-FBA-ready packaging. Send a reference image or spec and we prototype to it before any production run.
What is the minimum order and lead time for wholesale cane room dividers?
A trial or sample order can ship LCL (part-container) so you approve the wood, weave and finish first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate room dividers with other furniture and décor into one mixed container. Typical lead time is 30–45 days after sample approval; urgent orders at a premium.
Do cane room dividers ship flat-pack to save freight?
Yes. Folding screens fold flat by design, and larger partition dividers ship knock-down (RTA) with concealed hardware — both lower freight cost, reduce transit breakage and raise container density, ideal for large importers and online sellers. The woven cane panels are protected in transit, and all solid-wood frames use ISPM-15 heat-treated export packing.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the panel count, quantity and market. We confirm frame wood, weave, finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.