Wrought iron ottomans — hand-forged frames under upholstered, leather and wood tops.
The wood-and-iron piece is what buyers associate with Jodhpur, and the ottoman is its most versatile form: a hand-forged low-carbon iron base carrying a padded, leather, cane or solid-wood top. We manufacture pouffes, cubes and bench ottomans, document every piece for import, and ship from a single trial order up to repeat container volumes.
A base that stays planted while the top does the work.
An ottoman earns its place by being four pieces at once — extra seating, a footrest, a soft coffee-table surface and, with a lift-off top, hidden storage. All of those jobs put the base under load and movement: sat on, stood on, pushed around with a foot, dragged across a floor. A forged-iron base answers that. Wrought iron is low-carbon iron worked hot — hammered, drawn, bent and welded by hand — so it is tough and malleable rather than brittle, flexing and resisting impact instead of cracking like cast iron, and it carries the density and slight irregularity of real forging rather than the hollow lightness of tube steel. That weight keeps a low piece from skating away underfoot. Topped with upholstery, leather, woven cane or a solid-wood panel, it delivers the industrial, farmhouse and loft look your retail and hospitality customers recognise, with the warmth of a soft or timber surface and the re-weldable, re-coatable longevity of forged metal underneath.
How a forged-iron ottoman performs where lighter frames fail.
| Attribute | Wrought iron ottoman characteristic |
|---|---|
| Base | Low-carbon iron, hot-worked and hand-forged; near-zero porosity in the forged section |
| Strength & behaviour | High tensile strength; malleable and tough — bends and resists impact rather than cracking like cast iron |
| Stability | Dense and heavy, so a low ottoman stays planted under seating and footrest use; glides fitted to protect floors |
| Top options | Upholstery in your fabric, genuine or faux leather, woven cane, or solid sheesham, mango or acacia panel |
| Corrosion | Rusts if left bare and wet; controlled with phosphate / zinc-rich primer plus powder coat, lacquer or wax |
| Appearance | Hand-forged texture, hammer marks and scrollwork; character comes from the forging and finish, not grain |
| Durability | Commercial-grade; the base outlasts the upholstery and fashion cycles — ideal for contract and hospitality use |
| Repairability | Re-weldable and re-coatable; chips touch up on site, and tops reupholster onto the same frame |
| Sustainability | Iron is fully recyclable; paired with FSC and reclaimed timber for a lower-footprint, deforestation-free build |
Forging texture, top grain and exact finish vary piece to piece, which is why we recommend approving a physical ottoman before production. Request a wrought iron ottoman sample and we will send frame, top and finish references for your range, or read the full wrought iron material guide for how we forge and finish the metal.
Pouffe, cube or bench — matched to the room it serves.
Every size below is a common production starting point; under OEM we forge the base and build the top to your exact dimensions, fabric, foam density and finish. Frame woods for wooden tops are kiln-dried for dimensional stability in dry and humid markets alike.
| Type | Common size | Seat / top height | Typical use |
|---|---|---|---|
| Round pouffe | Ø 40–50 cm | 35–42 cm | Bedroom, living-room footrest & accent |
| Cube ottoman | 40 × 40 cm | 40–45 cm | Modular extra seating, nestable volume |
| Bench ottoman | 90–120 cm L | 40–45 cm | End-of-bed, hallway, hotel lobby seating |
| Storage ottoman | 60–100 cm L | 40–45 cm | Hinged or lift-off top over a forged frame |
Base styles
Four-leg, X-base, sled or scrolled forged frames; hairpin and square-tube legs; welded cross-stretchers for load. Round, square and rectangular tops set on the same frame families to suit the range.
Finishes
Matte, satin or gloss powder coat in your colour over a zinc-rich primer; antique black, aged bronze or controlled rust patina; raw sealed and distressed for loft ranges. Wood tops finished to CARB / TSCA Title VI formaldehyde-compliant norms.
Packing & shipping
Engineered knockdown (flat-pack / RTA) with bolt-together frames and removable tops to cut freight and breakage, with carton, retail-ready, Amazon-FBA-ready or branded packaging. ISPM-15 heat-treated export packing, shipped FOB or CIF from Mundra / Nhava Sheva.
One forged base, your choice of surface.
The iron base stays constant; the top is where you tune margin, look and market. Explore the surfaces we set onto wrought iron ottoman frames, each documented for import.
Leather & upholstery
Your fabric or ours, genuine or faux leather, foam density to spec.
Leather furniture materialOttomans that clear customs as cleanly as they sit.
The iron base carries no timber-legality burden, but a wood top or wooden storage carcass does — and that is where most buyers get caught at the port. Every wrought iron ottoman ships with the documentation serious importers need behind the timber: FSC chain-of-custody on request, Vriksh timber-legality verification, and EUDR-ready geolocation and deforestation-free due diligence, with CITES-compliant handling where sheesham is used. We provide US Lacey Act declaration support, UK Timber Regulation coverage, and CARB / TSCA formaldehyde-compliant finishes, with foam and leather conforming to the norms required for your market. Metal fabrication is inspected by SGS with in-house QC on every piece, documented in EN 10204 MTC-style records where applicable, and packed to ISPM-15 heat-treated standards.
| Area | Our standard |
|---|---|
| Timber legality | Vriksh verified · CITES-compliant sheesham |
| Sustainability | FSC chain-of-custody · reclaimed tops |
| EU & UK market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Social & quality | SEDEX / SMETA · ISO · SGS inspection |
| Export packing | ISPM-15 heat-treated · flat-pack options |
Finished to your brief, built to take years of service.
Finished correctly, a wrought iron base needs little maintenance and lasts through commercial service. Dust with a dry or barely-damp cloth and avoid abrasive pads that scratch the coat; wipe spills promptly and keep the frame dry, especially where it meets the floor; and inspect chips and scratches so you can touch up bare spots before rust can start. The top is cared for on its own schedule: wipe wood surfaces with a soft cloth and re-oil or re-wax oiled tops once or twice a year to feed the grain; treat leather with a neutral conditioner; keep upholstered tops out of prolonged direct sun to protect colour; and give cane panels an occasional light spritz so the weave stays taut. For covered-outdoor settings, move pieces under cover in prolonged wet or freezing weather. We supply matching touch-up finish and written care and finish specifications with every order, so your team and your retail and hospitality customers get consistent advice.
Wrought iron ottoman sourcing, answered.
What is a wrought iron ottoman made of?
A wrought iron ottoman pairs a hand-forged, low-carbon iron base with a padded, leather, cane or solid-wood top. The forged frame carries the load and gives the piece its weight, rigidity and industrial character; the top takes the surface your range needs — your fabric, genuine or faux leather, woven cane, or a sheesham, mango or acacia panel. Every version is built on real forged metal, never hollow tube steel or a plywood carcass.
What sizes do your wrought iron ottomans come in?
Common production ranges are round pouffe styles at roughly 40–50 cm diameter, cube ottomans at about 40 × 40 cm, and bench ottomans at 90–120 cm long, with seat heights of 35–45 cm. These are starting points — under OEM we forge the frame and build the top to your exact dimensions, fabric and foam density for contract and private-label programmes.
Are wrought iron ottomans suitable for commercial and hospitality use?
Yes. Forged iron is dense and rigid, so a wrought iron ottoman stays stable as extra seating, a footrest or a tray surface in hotel lobbies, lounges and restaurants. We specify a zinc-rich primer under a durable powder coat for high-traffic venues, and build commercial-grade bench and cube ottomans that outlast fashion cycles and reupholstery.
How do you stop a wrought iron ottoman frame from rusting?
Rust control starts at the factory: bare metal is cleaned, degreased and given a phosphate or zinc-rich primer, then sealed with a baked powder coat or a hand-applied wax or lacquer for the raw-industrial look. In service, keep the frame dry, wipe spills promptly and touch up any chips. We supply matching touch-up finish and full finish specifications with every order.
Can you ship wrought iron ottomans flat-pack to save freight?
Yes. Many wrought iron ottoman styles ship knockdown or flat-pack, with bolt-together frames and removable tops packed for density, which lowers freight cost and breakage for importers and online sellers. Assembled pieces are also available, packed to ISPM-15 heat-treated export standards and shipped FOB or CIF from Mundra or Nhava Sheva.
Can you make wrought iron ottomans to our own design and brand?
Yes. We work as ODM, with our own catalogue, and OEM — building to your drawings, dimensions, fabrics, powder-coat colours and private-label or retail-ready packaging, including custom CNC and metal fabrication, storage builds with hinged tops, and footrails or glides specified for high-wear venues.
Sample the base and top, then ship from one container up.
Approve the forging, top material, size and finish on a physical sample, then scale from a trial order to repeat container volumes on a 30–45 day lead time — QC-governed and documented for your market. See every style and surface on the ottomans hub, or explore how we forge and finish the metal on the wrought iron material guide.