Hairpin leg ottomans — handcrafted in Jodhpur, built for your floor.
Mid-century footstools and accent seats that pair a solid-wood or upholstered top with slim, hand-bent iron hairpin legs — light to look at, rigid to sit on, and packed flat so a container carries far more. Made to your sizes, fabrics and leg finish under ODM or OEM.
A small seat with a big silhouette — wood on the top, iron underneath.
The hairpin leg ottoman reads light because the legs are nothing but a bent rod, yet it sits firm because the load travels into a solid-wood mounting block, not a hollow panel. That contrast — a warm wood or upholstered top floating on raw industrial legs — is exactly why the style sells across mid-century, farmhouse, boho and loft interiors. We build it compact enough for a bedside perch and sturdy enough for a café, and because the legs unbolt, it ships at a fraction of the cube of a fixed-base footstool.
Hand-bent iron that stays true.
Each leg is bent from a single length of solid iron or steel rod on a jig, so the splay is consistent piece to piece — critical when a retailer photographs one unit and ships a thousand. We weld or cold-set the foot, cap it with a floor-protecting glide, and powder-coat for a chip-resistant, low-maintenance finish. The result is the airy mid-century look without the wobble that cheap stamped legs develop.
Gauge & profile
10–12 mm solid rod in two-prong or three-prong profiles, 20–40 cm heights, splay angle to your spec for stability under commercial use.
Finishes
Satin or matte black powder-coat, raw steel with clear lacquer, antique brass, gunmetal, or any RAL colour for private-label ranges.
Fixing
Legs bolt through a steel mounting plate into a solid-wood block under the seat — a rigid, serviceable join that re-tightens, never a staple into board.
Iron is our core metal for this piece; see the wrought iron and metal material guide for gauges, welds and finishing.
The numbers a buyer needs before the first RFQ.
Sizes below are our common production ranges; every dimension, leg gauge, fabric, foam density and finish is made to your specification under OEM. Wooden tops are kiln-dried solid wood for dimensional stability across dry and humid markets alike, and legs ship detached to protect the coating.
| Attribute | Specification |
|---|---|
| Top construction | Solid sheesham, mango or acacia; or upholstered seat on a solid-wood frame |
| Leg material | Solid iron / steel hairpin rod, 10–12 mm gauge, two- or three-prong |
| Leg finish | Satin black, matte black, raw clear-lacquer, antique brass, gunmetal, custom RAL |
| Top sizes | Round Ø 35–50 cm · square 35 × 35 to 45 × 45 cm · bench 90–120 cm L |
| Overall height | 35–45 cm typical (leg height made to order) |
| Wood finishes | CARB / TSCA-compliant, low-VOC; natural, stained, distressed, painted |
| Construction | Knockdown — legs bolt off for flat-pack freight |
| MOQ | Sample / trial LCL · 1 × 20ft FCL for best pricing |
| Lead time | 30–45 days typical · urgent at premium |
| Incoterms / ports | FOB / CIF · Mundra / Nhava Sheva |
| Packaging | ISPM-15 heat-treated · retail-ready / branded / Amazon-FBA-ready on request |
One compact piece, every channel.
Retail & online sellers
Flat-pack cube and quick two-bolt assembly make the hairpin ottoman a natural for marketplace and FBA-ready programmes — low freight, low breakage, strong lifestyle photography.
Supplying online sellersInterior designers
Specify the wood, stain, leg finish and height to match a scheme; small bespoke runs and CNC-carved tops are welcome under OEM.
Working with designersHospitality & contract
Heavier gauge legs and commercial-grade upholstery suit café, lounge and lobby use where a light footprint keeps floor plans open.
Hospitality & contract furnitureA solid-wood seat, your choice of top.
Every hairpin leg ottoman starts with a solid-wood seat or frame — never plywood or particle board — then takes the surface your market wants. A bare wooden top shows grain and reads mid-century; an upholstered top in your fabric or leather softens it for living rooms and bedrooms.
Solid mango & sheesham
Warm, close-grained hardwood tops, Vriksh-verified and FSC-available.
Mango wood materialLeather & upholstery
Genuine or faux leather and your fabric, foam density to spec.
Leather furniture materialBuilt to stay sellable.
Kiln-dried wooden tops resist warping across climates; wipe them with a soft dry cloth and refresh occasionally with a wood-safe wax or oil. The powder-coated legs need only a damp wipe — the coating resists chips and rust, and a quick re-tighten of the mounting bolts keeps the join silent for years. Treat leather tops with a neutral conditioner and keep upholstered seats out of prolonged direct sun to protect colour. Care and material cards ship with every order, so your retail and hospitality customers get the same guidance you do.
Hairpin leg ottoman sourcing FAQs
What is a hairpin leg ottoman?
A hairpin leg ottoman is a compact footstool or accent seat with a solid-wood or upholstered top raised on slim, V-shaped metal legs bent from a single length of iron or steel rod. The look is mid-century and industrial-modern — light, airy and open underneath — while the solid-wood frame carries the load. We build it as a footrest, extra seat, side perch or small coffee surface.
What are the hairpin legs made from?
Our hairpin legs are bent from solid iron or steel rod, typically 10–12 mm gauge, powder-coated in satin black, raw clear-lacquer or your custom RAL colour, or finished in antique brass and gunmetal. Two-prong and three-prong profiles are available. Legs bolt to a solid-wood mounting block under the seat for a rigid, wobble-free join, and ship knocked-down to protect the finish and cut freight.
What is the minimum order for hairpin leg ottomans?
A trial or sample order can ship LCL (part-container). For best wholesale pricing, one 20ft full container load is our standard minimum thereafter. Hairpin legs detach and the tops stack, so these pieces consolidate very efficiently — ideal for mixed containers alongside benches, side tables and décor.
Can you make hairpin leg ottomans to our own design or private label?
Yes. We are both ODM, with ready catalogue designs, and OEM — we build to your drawings, seat sizes, leg gauge and splay, fabrics and finishes, including custom CNC-carved wooden tops and private-label or retail-ready packaging. Send a reference or tech pack and we prototype before production.
Are hairpin leg ottomans compliant for import into the US and EU?
Yes. We document FSC chain-of-custody and Vriksh timber-legality on the wooden components, are EUDR-ready with geolocation and deforestation-free due diligence, and support US Lacey Act declarations, UK Timber Regulation, and CARB / TSCA formaldehyde-compliant finishes. Metal and foam conform to the norms required for your market.
Do hairpin leg ottomans ship flat-pack?
Yes. The legs unbolt and the seat ships separately, so a hairpin leg ottoman is one of the most freight-efficient pieces we make. Flat-packing raises container density, lowers breakage and suits importers and online sellers. Assembled pieces are also available, packed to ISPM-15 heat-treated export standards.
Quote a container of hairpin leg ottomans — one style or a mixed load.
Send your top sizes, wood or fabric, leg gauge and finish, and target markets. We come back with FOB / CIF pricing, MOQs and a 30–45 day lead time, plus the compliance documentation your customs broker will ask for. Explore the full ottoman range or the iron and metal we work in while you plan.