Reclaimed wood nightstands, handcrafted in Jodhpur — wholesale for importers, retailers and hospitality.
Salvaged beams and old boards, de-nailed, kiln-dried and re-milled into a bedside table with real history in the grain — rustic, sustainable and container-ready. Manufacturer-direct, compliance-documented and graded to ship as a matched pair, from a trial order up.
A reclaimed wood nightstand carries character no new board can fake.
The nightstand is the most-touched piece in any bedroom — a surface for a lamp and a glass of water, a drawer for the things you reach for in the dark. Reclaimed wood gives that small, high-visibility piece something a laminate box never will: saw marks, nail holes, old paint traces and a worn patina that read as authentic the moment a shopper or a guest sets a hand on it. It is what a designer specifies to warm a bed wall, what a boutique hotel buys to signal craft, and what a retailer margins up because the material tells a sustainability story out loud — no new tree felled for the piece. We build it honestly: salvaged timber does the visible work, de-nailed, kiln-dried and re-milled for stability, with solid sheesham or mango carrying the drawers and the load. Choose a ready design from our catalogue or hand us your own.
Old wood on the outside, sound structure doing the work.
Reclaimed timber reaches our workshop as beams, planks, old doors and railway or boat wood — each with its own hardness, moisture and history. Because a bedside table is opened and closed thousands of times and carries a lamp's weight on top, we process the salvaged wood properly and match the construction to how you sell and ship it, and to the wear a guest room or a retail life demands.
Salvaged, de-nailed & kiln-dried
Old boards are cleaned, metal-detected and de-nailed, then kiln-dried to a stable moisture content and re-milled true — so the character stays but the piece will not warp, split or move in a heated or air-conditioned bedroom.
Solid-wood carcass & drawers
Where salvaged stock is scarce or thin, the drawer boxes and structure are built in solid sheesham or mango, with dovetail or doweled joints, so the drawers run true and the carcass takes daily load.
Mixed media & knock-down
Reclaimed tops pair with powder-coated wrought iron legs or brass pulls for an industrial look, and can ship knock-down / flat-pack to raise container density and cut breakage.
Whatever the build, every nightstand carries solid wood throughout — we do not supply plywood-only or veneered bedside tables. Read how the material itself behaves — sourcing, grades, finishes and care — on our reclaimed wood material guide, understand the trade-offs in our reclaimed versus new wood comparison, or see the full range of bedside tables on the nightstands hub.
One honest material, several looks — matched to your sample before we cut a container.
Natural, oiled & waxed
A clear oil or wax lets the old grain, tool marks and tonal variation show through for the most authentic rustic bedside — easy to refresh over time and warm to the touch.
Distressed & multi-tone
Heavier distressing, lime-wash, whitewash or a patchwork of mixed board tones for boho, coastal and farmhouse ranges — every piece one-of-a-kind, the set balanced to read as deliberate.
Sealed matt & painted accents
A CARB/TSCA-compliant matt lacquer seals the surface against lamp condensation for contract and hotel use, with optional painted drawer fronts or a marble or stone top over the salvaged body.
Indicative specs — every dimension, drawer count and finish is made to your order.
Figures below are typical ranges for reference. Because reclaimed stock varies, we manufacture to your exact drawings and market requirements, so height, footprint, drawer configuration, finish and hardware are all specified at the quote stage. Material and lot traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Primary material | Reclaimed / old wood — salvaged beams, planks, doors, railway & boat wood |
| Carcass & drawers | Solid sheesham, mango or acacia · dovetail or doweled boxes |
| Top surface | Reclaimed solid wood · optional marble / stone insert |
| Drawers | 1–3 drawers · optional open shelf or cabinet door |
| Legs / base | Turned wood, plinth, or powder-coated wrought-iron / brass |
| Finish | Natural, oiled, waxed, distressed, lime/whitewash, matt lacquer — CARB/TSCA-compliant |
| Height | Approx. 55–65 cm (to suit mattress height; custom on request) |
| Width | Approx. 40–55 cm |
| Depth | Approx. 35–45 cm |
| Assembly | Assembled, part-assembled or knock-down / flat-pack (RTA) |
| Packing | Export carton · ISPM-15 · retail / FBA-ready · matched pairs |
Built for the bedroom, documented for the port.
Made for hospitality & retail
Reclaimed wood is dense, already seasoned and hard-wearing, which suits a bedside table opened nightly and wiped down by housekeeping. It anchors rustic, industrial, boho and farmhouse ranges, and the sustainability story adds visible value at retail and in boutique hotels and resorts. We QC each lot for consistent tone, size and drawer action so a guest-room run or a carton off the shelf reads as a set. See the full range we make for hotels, restaurants and resorts.
Import-ready & sustainable by design
Because the piece reuses timber already harvested, it is one of the strongest deforestation-free stories you can put on a shelf — and we back it with paperwork. The reclaimed material is documented, combined solid wood carries FSC chain-of-custody and Vriksh timber-legality, and the container clears with EUDR-ready, Lacey Act, UKTR, CARB/TSCA and ISPM-15 documentation. See every certification we hold.
Reclaimed wood nightstands — wholesale & export FAQ
What is a reclaimed wood nightstand made of?
Our reclaimed wood nightstands are built from old, salvaged timber — beams, planks, doors and railway or boat wood given a second life — often combined with solid sheesham, mango or acacia for the drawer boxes and structure. Every nightstand carries solid wood throughout; we do not supply plywood-only or veneered bedside tables. The salvaged boards are de-nailed, kiln-dried and re-milled so the piece is stable and takes a lamp, a book and a water glass night after night while surviving ocean freight.
Is reclaimed wood furniture sustainable and deforestation-free?
Yes — reclaimed wood reuses timber that has already been harvested, so no new tree is felled for the piece, which makes it one of the most defensible sustainability stories in a bedroom range. We document the salvaged material, pair it with FSC chain-of-custody and Vriksh timber-legality where new solid wood is combined, and our due diligence is EUDR-ready with geolocation and deforestation-free sourcing, so the container clears for EU and US import.
Will two reclaimed wood nightstands match as a pair?
Reclaimed wood is naturally varied — nail holes, saw marks, old paint traces, grain and tone all differ board to board, and buyers choose it for exactly that character. Because bedside tables sell in twos, we grade and balance a matched pair so they read as a deliberate set rather than mismatched, and for hospitality lots we hold the overall tone, size and drawer action consistent across the whole run while keeping the honest, one-of-a-kind surface.
What is the minimum order for wholesale reclaimed wood nightstands?
A trial or sample order can ship LCL (part-container) so you can approve the wood tone, finish and drawer action before committing. For best wholesale pricing thereafter, one 20ft full container load (FCL) is our standard minimum, and we consolidate reclaimed wood nightstands with beds, dressers, coffee tables, other furniture and décor into a single mixed container.
Can you make reclaimed wood nightstands to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, dimensions, drawer configuration, finish and hardware, with custom CNC detailing, your branding and retail-ready, Amazon-FBA-ready or gift packaging. Send a reference image or a spec and we prototype to it before any production run.
How do you care for a reclaimed wood nightstand?
Wipe with a dry or barely-damp soft cloth and avoid soaking the surface or using harsh or acidic cleaners. Our standard lacquer and wax-oil finishes are CARB/TSCA-compliant and seal the old wood against lamp condensation and daily handling; an oiled or waxed finish can simply be re-oiled over time, while a sealed matt lacquer needs no more than regular dusting.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, drawer count, finish, quantity and market. We confirm the reclaimed build, carcass wood, surface, MOQ and a FOB/CIF price, produce a sample pair for approval, then manufacture and pack to your standard on a 30–45 day lead time.