Teak dining tables, handcrafted in Jodhpur — wholesale for importers, retailers and hospitality.
Solid teak dining tables built on the one hardwood that stays flat and performs indoors and out — golden grain, natural oils that fend off water and decay, and a wide top engineered to resist warping across years of daily use. Manufacturer-direct, compliance-documented and container-ready, from a trial order up.
Teak is the one wood a buyer can set in a dining room and move onto the terrace.
A dining table is the hardest-working flat surface in the home or venue — a wide, unsupported span that has to stay dead level through spills, heat, cleaning and, increasingly, a run between the dining room and the garden. Teak answers all of it. Its high natural oil and silica content resists water, rot, insects and fungal decay, and its dimensional stability keeps a broad top from cupping or warping the way softer woods do. The same table that completes a formal indoor set can serve a courtyard, a garden restaurant or an al-fresco terrace without a change of material, which lets you list one table into more than one range. Its warm golden-brown grain reads as premium on the shelf and photographs cleanly for online listings; left outdoors untreated, teak weathers to a designer-favourite silver-grey. We build it as a genuine solid-wood product — not a veneer over particleboard — with sound joinery and a properly engineered top, so the table holds up to commercial dining use. Choose a ready design from our dining-table range or hand us your own, including a table built to match chairs you already stock.
What the wood brings to a dining table.
Stays flat over a wide span
A dining top is a large, unsupported surface, and that is exactly where cheaper woods cup and warp. Teak's dense, oil-rich grain makes it one of the most dimensionally stable hardwoods, so a 180 cm or 240 cm top stays level through seasonal humidity swings and years of use. We build tops as solid panels with proper battening so the surface earns its working life.
Teak wood properties & careWeather-proof by nature
High natural oil and silica content resists water, rot, insects and fungal decay — so a teak dining table performs on an open terrace, a courtyard or an al-fresco restaurant, not only a dry dining room. It is the benchmark outdoor-furniture hardwood, which is precisely why it sells into both indoor and outdoor dining ranges from a single SKU.
All dining-table stylesGrain that reads as premium
Warm golden-brown colour, a straight-to-wavy grain and a honeyed indoor tone give teak instant shelf appeal and a project-premium look at the dining table. Finished natural or teak-oiled, it anchors mid-to-high retail price points and hospitality specifications where a dining set has to look the part across every cover.
Teak finishes we offerIndicative specs — every size, base and finish is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so length, shape, edge profile, base style, finish and indoor-or-outdoor spec are all confirmed at the quote stage — and we can match a table to specific chairs or an existing collection. Lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Primary wood | Solid teak (Tectona grandis) |
| Top | Solid teak panel · butcher-block · live-edge slab · teak with marble or stone inlay |
| Base / legs | Solid teak legs · trestle · pedestal · teak with powder-coated wrought iron |
| Table height | Approx. 75–78 cm — matched to chair seat height on request |
| Lengths / seating | 120 cm (4) · 180–200 cm (6) · 220–240 cm (8) · refectory & banquet on request |
| Shapes | Rectangular · round · oval · square · extension / butterfly-leaf |
| Use | Indoor, outdoor or dual-use — specified per design |
| Finish | Natural, teak-oiled, matt or satin lacquer — CARB/TSCA-compliant indoor coatings |
| Assembly | Knock-down / flat-pack (RTA), part-assembled or assembled |
| Packing | Export carton · ISPM-15 · retail / FBA-ready on request |
One teak dining table, every channel that asks for durability and warmth at the table.
Retail, online & private label
Teak's golden grain photographs cleanly for marketplace and catalogue listings, and its indoor-outdoor versatility lets you sell one table into formal dining and al-fresco ranges alike. We produce your range under your brand with retail-ready or Amazon-FBA packaging, and consolidate teak dining tables with matching teak dining chairs, benches and décor into one container. Private-label manufacturing keeps the look and the margin yours.
Hospitality, restaurant & contract
Dining tables for restaurants, cafés, hotel dining rooms and resort terraces have to survive constant service and weather — teak was made for it. With genuine solid-wood construction and QC on every piece, our teak dining tables are built and inspected for the restaurant floor, not just the showroom. We scale from a trial order to repeat container volumes, so you can fit out one venue or a whole chain on consistent spec and finish.
Paperwork your customs broker will thank you for.
Import-ready on every container
Our teak dining tables ship with FSC chain-of-custody and Vriksh timber-legality, backed by ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation and CARB/TSCA finishes — so your tables clear the port instead of sitting in it. See how we meet EUDR, or review every certification we hold.
Care & longevity
Indoors, a soft dry wipe and occasional wood wax keep teak dining tables looking their best, and spills come off easily thanks to the wood's natural oils — a real advantage on a surface that meets food and drink daily. Outdoors, teak needs little more than periodic cleaning: leave it to silver naturally, or apply teak oil to hold the golden tone. Because the wood's own oils do the protective work, the table keeps performing with minimal upkeep. We finish indoor tops with CARB/TSCA-compliant lacquers chosen for wear, and share care guidance with every order so your buyers keep the table selling for years.
Teak dining tables — wholesale & export FAQ
Why choose a teak dining table over sheesham, mango or acacia?
Teak (Tectona grandis) is the most dimensionally stable and weather-resistant of the common dining woods. A dining table is a large, flat, load-bearing surface that sees spills, heat, cleaning and — increasingly — a move onto the terrace, and teak's natural oils and silica resist water, rot, insects and warping better than any of them. That stability keeps a wide top flat over years of use, while the warm golden-brown grain anchors mid-to-high retail price points and hospitality specifications. It is the one dining table a buyer can list into both an indoor range and an outdoor-dining range.
Can a teak dining table be used outdoors on a patio or in a garden restaurant?
Yes. Teak is the benchmark outdoor-furniture hardwood, so our teak dining tables suit patio, deck, courtyard and al-fresco restaurant settings as well as indoor dining rooms. Left untreated outdoors, teak weathers to a soft silver-grey patina; teak-oiled, it holds its golden tone. We confirm whether a top and base are finished for indoor, outdoor or dual use at the quote stage so the table matches the setting you are selling into.
What sizes and seating capacities do you make?
We manufacture to your exact drawings, but as a guide: a 4-seater runs roughly 120 cm, a 6-seater 180–200 cm, an 8-seater 220–240 cm, and larger refectory and banquet lengths on request. Tops are typically 76 cm high and 90–110 cm deep, with round, oval, square and extension options. We can also match a table to dining chairs or benches you already stock so the set ships as one consistent program.
What is the minimum order for wholesale teak dining tables?
A trial or sample order can ship LCL (part-container) so you can approve the wood, build and finish first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate teak dining tables with matching dining chairs, benches and décor into a single mixed container.
Can you make teak dining tables to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, dimensions, edge profile, base style and finish, with custom CNC detailing, your branding and retail-ready or Amazon-FBA packaging. Send a reference image or a spec sheet and we prototype to it before any bulk run, and we can build a table to match chairs or a collection you already sell.
Are your teak dining tables compliant for US and EU import?
Yes. We document FSC chain-of-custody and Vriksh timber-legality on teak, with ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA formaldehyde-compliant finishes and ISPM-15 export packing.
Do teak dining tables ship knock-down or assembled?
Most of our teak dining tables ship knock-down (RTA) — the top and detachable legs or trestle base flat-pack to raise container density, cut breakage and lower freight per table, which matters when you are shipping dining sets in volume. Heavily carved or one-piece live-edge tops ship assembled or part-assembled to protect the surface and joinery. We confirm the format per design at the quote stage.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the length, shape, base style, matching chair height, indoor-or-outdoor use and market. We confirm finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.