Teak dining chairs, handcrafted in Jodhpur — wholesale for importers, retailers and hospitality.
Solid teak dining chairs built on the one hardwood that performs indoors and out — golden grain, natural oils that fend off water and decay, and joinery built to survive a restaurant floor, not just a showroom. Manufacturer-direct, compliance-documented and container-ready, from a trial order up.
Teak is the one wood a buyer can set at an indoor table and move onto the terrace.
A dining chair takes more punishment than almost any seat in the home or venue — daily use, spills, cleaning, scraping across floors, and increasingly a run between the dining room and the garden. Teak answers all of it, because its natural oils and silica resist water, rot, insects and fungal decay. The same chair that completes a formal dining set can serve a café terrace or an al-fresco restaurant without a change of material, which lets you list one chair into more than one range. Its warm golden-brown grain reads as premium on the shelf and photographs cleanly for online listings; left outdoors untreated, teak weathers to a designer-favourite silver-grey. We build it as a genuine solid-wood product — not a veneer over particleboard — so the joinery holds up to commercial dining use. Choose a ready design from our catalogue or hand us your own, including a chair built to match a dining table you already stock.
What the wood brings to a dining chair.
Weather-proof by nature
High natural oil and silica content resists water, rot, insects and fungal decay — so a teak dining chair performs on an open terrace, a courtyard or an al-fresco restaurant, not only a dry dining room. It is the benchmark outdoor-furniture hardwood, which is exactly why it sells into both indoor and outdoor dining ranges.
Teak wood properties & careBuilt for daily use
Those same oils make teak dense, hard-wearing and dimensionally stable, so seats, backs and leg joints stay tight under repeated loading. A dining chair earns its keep by surviving thousands of sittings a year; teak and sound mortise-and-tenon joinery give it that working life across hospitality and home use alike.
The joinery we useGrain that reads as premium
Warm golden-brown colour, a straight-to-wavy grain and a honeyed indoor tone give teak instant shelf appeal and a project-premium look at the dining table. Finished natural or teak-oiled, it anchors mid-to-high retail price points and hospitality specifications where a dining set has to look the part.
Teak finishes we offerIndicative specs — every dimension, build and finish is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so seat height, back style, finish and indoor-or-outdoor spec are all confirmed at the quote stage — and we can match seat height and width to a specific dining table. Lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Primary wood | Solid teak (Tectona grandis) |
| Seat & back | Solid teak · woven cane / rattan · upholstered cushion · leather seat |
| Legs / base | Solid teak or teak with powder-coated wrought iron |
| Seat height | Approx. 45–48 cm — matched to table height on request |
| Overall height | Approx. 85–100 cm depending on back style |
| Configurations | Side chair · carver / armchair · cross-back · ladder-back · slat-back |
| Use | Indoor, outdoor or dual-use — specified per style |
| Finish | Natural, teak-oiled, matt or satin lacquer — CARB/TSCA-compliant indoor coatings |
| Assembly | Knock-down / flat-pack (RTA), part-assembled or assembled |
| Packing | Export carton · ISPM-15 · retail / FBA-ready on request |
One teak chair, every channel that asks for durability and warmth at the table.
Retail, online & private label
Teak's golden grain photographs cleanly for marketplace and catalogue listings, and its indoor-outdoor versatility lets you sell one chair into formal dining and al-fresco ranges alike. We produce your range under your brand with retail-ready or Amazon-FBA packaging, and consolidate teak dining chairs with matching dining tables, benches and décor into one container. Private-label manufacturing keeps the look and the margin yours.
Hospitality, restaurant & contract
Dining chairs for restaurants, cafés, hotel dining rooms and resort terraces have to survive constant turnover and weather — teak was made for it. With genuine solid-wood joinery and QC on every piece, our teak dining chairs are built and inspected for the restaurant floor, not just the showroom. We scale from a trial order to repeat container volumes, so you can fit out one venue or a whole chain on consistent spec.
Paperwork your customs broker will thank you for.
Import-ready on every container
Our teak dining chairs ship with FSC chain-of-custody and Vriksh timber-legality, backed by ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation and CARB/TSCA finishes — so your seating clears the port instead of sitting in it. See how we meet EUDR, or review every certification we hold.
Care & longevity
Indoors, a soft dry wipe and occasional wood wax keep teak dining chairs looking their best, and spills come off easily thanks to the wood's natural oils. Outdoors, teak needs little more than periodic cleaning — leave it to silver naturally, or apply teak oil to hold the golden tone. Because the wood's own oils do the protective work, the chair keeps performing with minimal upkeep. We finish indoor pieces with CARB/TSCA-compliant lacquers chosen for wear, and share care guidance with every order so your buyers keep the chair selling for years.
Teak dining chairs — wholesale & export FAQ
Why are teak dining chairs worth the premium over other woods?
Teak (Tectona grandis) carries natural oils and silica in its grain that resist water, rot, insects and fungal decay. For a dining chair — a seat that takes daily use, spills, cleaning and, increasingly, indoor-outdoor duty — that durability is the whole argument. The same chair sells into a formal dining set, a café terrace and an al-fresco restaurant, with a warm golden-brown grain that photographs cleanly and anchors mid-to-high retail price points. It is the dining chair a buyer can list into more than one range.
Can teak dining chairs be used outdoors on a patio or terrace?
Yes. Teak is the benchmark outdoor-furniture hardwood, so our teak dining chairs suit patio, deck, courtyard and al-fresco restaurant settings as well as indoor dining rooms. Left untreated outdoors, teak weathers to a soft silver-grey patina; teak-oiled, it keeps its golden tone. We confirm whether a style is finished for indoor, outdoor or dual use at the quote stage so the chair matches the setting you are selling into.
What is the minimum order for wholesale teak dining chairs?
A trial or sample order can ship LCL (part-container) so you can approve the wood, build and finish first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate teak dining chairs with matching dining tables, benches and décor into a single mixed container.
Can you make teak dining chairs to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, dimensions, carving and finish, with custom CNC detailing, your branding and retail-ready or Amazon-FBA packaging. Send a reference image or a spec sheet and we prototype to it before any bulk run, and we can match a chair to a dining table you already stock.
Are your teak dining chairs compliant for US and EU import?
Yes. We document FSC chain-of-custody and Vriksh timber-legality on teak, with ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA formaldehyde-compliant finishes and ISPM-15 export packing.
Do teak dining chairs ship knock-down or assembled?
Most leg-based teak dining chairs ship knock-down (RTA) — this raises container density, cuts breakage and lowers freight per chair, which matters when you are shipping dining sets in volume. Fully carved or curved-back styles usually ship assembled or part-assembled to protect the joinery. We confirm the format per style at the quote stage.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, quantity, matching table height, indoor-or-outdoor use and market. We confirm finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.