Rustic dining chairs, handcrafted in Jodhpur — wholesale for importers, retailers and restaurants.
Distressed solid sheesham, mango, acacia and reclaimed wood with honest grain, open knots and optional wrought-iron accents — farmhouse, barn and country silhouettes. Manufacturer-direct, compliance-documented and container-ready, matched set after set, from a trial order up.
Rustic at the table — character that sells online and takes a daily beating.
The rustic dining chair wins on honesty: visible grain, open knots, saw marks and lightly distressed edges that read as farmhouse, barn or country rather than factory-smooth. It anchors a reclaimed-wood dining set, a gastropub, a country-house restaurant or a marketplace listing, and its weathered texture photographs with real depth — which matters when you are selling a four-, six- or eight-chair set. Where our rustic accent chairs are occasional pieces, the dining chair is engineered for repeat sitting, matched tolerances across the set, and pairing with a specific table height. We build it as a genuine solid-wood product — not a particleboard shell given a fake distress — so a scuff only adds to the story instead of exposing a chipboard core. Choose a ready design from our catalogue or hand us your own.
What goes into a rustic dining chair that earns its patina honestly.
Solid & reclaimed wood
Sheesham, mango and acacia — kiln-dried, mortise-and-tenon joined and sanded to a tactile matte — or genuine reclaimed/old wood that arrives with its own weathered grain and nail-hole history. A dining chair takes tilt, drag and daily load, so the solid frame and tight joinery are what stop wobble and keep the chair square through café and restaurant service.
Reclaimed wood for rustic furnitureHand-distressed character
Each frame is worked by hand — wire-brushed to raise grain, lightly chamfered and distressed at the edges, with knots and saw marks left visible instead of filled. This is the single most recognisable rustic signature, and the texture that gives a dining-set listing its depth. We agree the distress level up front and hold it consistent across every chair in the set.
Sheesham wood for dining furniturePlank, woven & iron-accent seats
Seats come as a shaped solid-wood plank, a woven cane or jute panel, or a cotton/linen cushion on a solid-wood base; slim powder-coated wrought-iron legs and stretchers push the look further toward industrial-farmhouse — all on the same solid-wood core, so one compliant craft story carries several looks across your collection.
Wrought iron for industrial-rustic seatingIndicative specs — every dimension, distress level and finish is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so seat height, back style, frame wood, distress level, seat type and finish are all specified at the quote stage — and held consistent across every chair in the set. Lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Frame woods | Sheesham, mango, acacia, reclaimed / old wood |
| Back | Ladder-back · cross-back · slat · plank · spindle |
| Seat | Solid-wood plank, woven cane / jute, or cushioned base |
| Legs / base | Solid wood or slim powder-coated wrought iron |
| Seat height | Approx. 45–48 cm (18–19 in), table-matched |
| Overall width | Approx. 44–52 cm (17–20 in) |
| Overall height | Approx. 90–100 cm (35–39 in) depending on back style |
| Finish | Distressed natural, antique, weathered-grey, warm matte — CARB / TSCA-compliant |
| Form | Knock-down / flat-pack (RTA) or part-assembled |
| Packing | Export carton · ISPM-15 · retail / FBA-ready on request |
| MOQ & lead time | LCL trial / sample; 1× 20ft FCL thereafter · 30–45 days |
One rustic dining chair, every channel that asks for warmth and wear.
Retail, online & private label
Distressed wood and honest grain photograph with depth for marketplace and catalogue listings, and dining chairs sell as sets of four, six or eight — a higher ticket and a natural upsell against a matching farmhouse table. We produce your range under your brand with retail-ready or Amazon-FBA packaging, and consolidate rustic dining chairs with tables, benches and décor into one container. Private-label manufacturing keeps the look yours across the whole collection.
Hospitality, restaurant & contract
Rustic dining chairs read as warm and characterful in gastropub, farmhouse, country-house and boutique-hotel settings — and because the frame is genuine solid wood with QC on every piece, they take daily commercial sitting, cleaning and dragging without the finish failing. Hospitality & contract seating is built and inspected for the floor, not just the showroom, with consistent repeat production across our vetted Jodhpur network.
Paperwork your customs broker will thank you for.
Import-ready on every container
Our sheesham, mango and reclaimed-wood rustic dining chairs ship with FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of Dalbergia sissoo, backed by ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation and CARB/TSCA Title VI finishes — so your seating clears the port instead of sitting in it. See every certification we hold.
Care & longevity
Solid wood moves with climate; a stable indoor environment and a soft dry wipe keep frames and joints sound, while occasional wood wax feeds the matte finish and deepens the patina. A rustic distressed surface is forgiving — small marks read as character, not damage — and reclaimed-wood chairs are sealed so the weathered look stays clean to the touch. We finish with CARB/TSCA-compliant lacquers chosen for wear and share care and assembly guidance with every order, so your buyers keep the set selling for years.
Rustic dining chairs — wholesale & export FAQ
What is a rustic dining chair?
A rustic dining chair is a side chair that shows the wood's natural character rather than hiding it — visible grain, open knots, saw marks and lightly distressed edges, finished in warm matte tones that read as farmhouse, barn or country. Ours are built on solid sheesham, mango, acacia or reclaimed wood, often with a ladder-back, cross-back or plank-seat silhouette and optional wrought-iron detailing. The look is deliberately handmade and lived-in, which is exactly why it photographs well for retail and holds up in a busy restaurant.
What wood are your rustic dining chairs made from?
Every chair carries at least one solid-wood component. Frames and legs are solid sheesham (Indian rosewood), mango or acacia, and genuine reclaimed/old wood on request, which brings its own weathered grain and patina. The seat is a solid-wood plank or a woven or cushioned panel on a solid-wood base, with optional powder-coated wrought-iron legs or stretchers. We do not supply plywood-only or particleboard seating — the solid frame and tight joinery are what let a rustic dining chair survive daily café and restaurant use.
What is the seat height of your rustic dining chairs?
Seat height is typically about 45–48 cm (18–19 in), which pairs correctly with a standard dining or restaurant table top of roughly 74–76 cm (29–30 in) and leaves comfortable knee clearance. Overall chair height usually runs 90–100 cm depending on the back style. Because we manufacture to order, we set exact seat height, back height and seat depth to the table and market you specify at the quote stage.
What is the minimum order for wholesale rustic dining chairs?
A trial or sample order can ship LCL (part-container) so you approve the wood, distressing, seat and finish first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate rustic dining chairs with matching farmhouse dining tables, benches, other seating, décor and metalware into a single mixed container.
Can you make rustic dining chairs to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, dimensions, back style, seat type, distress level and finish, with custom CNC detailing, your branding and retail-ready or Amazon-FBA packaging. Send a reference image or a spec sheet and we prototype to it, then match it consistently across the full set.
Are your rustic dining chairs compliant for US and EU import?
Yes. We document FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of Dalbergia sissoo (sheesham), with ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA Title VI finishes and ISPM-15 export packing.
Send a reference or your catalogue — we'll quote, sample and ship the set.
Tell us the back style, seat type, distress level, table height, set size and market. We confirm wood, finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.