Solid Wood Dining Seating · Export-Only B2B
Rubberwood Dining Chairs — Solid Hardwood, Export-Ready
Dense, close-grained rubberwood chairs built for the stress points that matter — seat frames, legs and back joints — finished for Western markets and shipped assembled or flat-pack from Jodhpur, India.
We manufacture rubberwood dining chairs for importers, hospitality groups, retailers and private-label brands, with CARB / TSCA-compliant finishes, FSC chain-of-custody options and EUDR-ready due diligence. Order a trial batch to assess the build, then scale to repeat container volumes under managed QC.
What it is
A hardwood built for daily use
Rubberwood (Hevea brasiliensis, also called parawood) is the timber of the mature rubber tree, harvested once latex production ends — a byproduct of an existing plantation cycle rather than a felled forest hardwood. Mechanically it behaves like a true hardwood: dense, stiff and strong, with properties in the same range as ash and maple. For a dining chair — which lives under repeated loading, leaning and drag-across-floor stress — that strength translates into joints that stay tight and frames that do not loosen.
The grain is fine, even and pale, with a creamy blonde base tone. That neutral, close grain is the reason rubberwood takes stain and lacquer so predictably: it accepts light natural tones, mid walnuts, dark espresso and painted finishes without blotching, so a single chair model can be specced across very different collections. It is a credible, cost-advantaged solid-wood alternative for buyers diversifying sourcing away from China while keeping a genuine hardwood feel.
Why rubberwood for dining seating
Properties and benefits
Strength where chairs fail
Dense, stiff hardwood holds mortise-and-tenon and dowel joinery under constant seat-and-back loading, so legs and frames stay rigid through years of use.
Takes any finish cleanly
Fine, even, pale grain accepts natural, walnut, espresso and painted finishes without blotching — one chair platform, many collection looks.
Dimensionally stable
Kiln-dried and treated stock resists the warping and movement that loosen chair joints, giving consistent fit across a full production run.
Cost-advantaged hardwood
Plantation-cycle byproduct keeps landed cost competitive versus ash or oak while delivering a true solid-hardwood seat, not a veneer or panel.
Sustainability story
Sourced at the end of the rubber tree's latex life, it supports a deforestation-free, FSC chain-of-custody and EUDR-ready narrative buyers can stand behind.
Flat-pack friendly
Stable, machinable stock suits precision knockdown joinery, so chairs ship dense and reassemble square — lower freight, lower breakage.
Specification
Rubberwood dining chair spec sheet
Indicative ranges for ODM models; all dimensions, finishes and construction are made to your spec under OEM.
| Attribute | Detail |
|---|---|
| Material | Solid rubberwood (Hevea brasiliensis / parawood), kiln-dried hardwood; optional contrast legs or upholstered seat |
| Construction | Mortise-and-tenon / dowel joinery; corner-blocked seat frame; assembled or knockdown (flat-pack / RTA) |
| Seat height | ~45–48 cm (18–19 in) standard dining; counter and bar heights available to spec |
| Overall height | ~85–95 cm (33–37 in) to top of backrest, model-dependent |
| Seat type | Solid wood, wood + rush/cane, or upholstered (fabric / leather / PU) to buyer spec |
| Finishes | Natural, light oak, walnut, espresso, distressed and painted; CARB / TSCA Title VI formaldehyde-compliant systems for US |
| Styles | Windsor, ladder-back, cross-back, slat-back, spindle, upholstered side and carver/arm chairs |
| Use cases | Residential dining, restaurants, cafés, hotels, bars and contract/hospitality seating |
| MOQ | Trial/sample via LCL; 1 × 20ft FCL minimum for best pricing; mixed-category containers supported |
| Lead time | 30–45 days typical; urgent orders at premium |
| Shipping | FOB / CIF from Mundra or Nhava Sheva; flat-pack maximizes container density |
| Packaging | Export carton, retail-ready, Amazon-FBA-ready, branded or gift packaging to spec |
| Compliance | FSC chain-of-custody, Vriksh, EUDR-ready, US Lacey Act support, UKTR, ISPM-15 packaging, ISO/SGS, SEDEX/SMETA |
Finishes, sizes and styles
Spec it to your collection
Finishes
Natural blonde, light oak, mid and dark walnut, espresso, hand-distressed and solid painted. US programs ship with CARB / TSCA Title VI-compliant finish systems; matte, satin or open-pore sheens on request.
Sizes
Standard dining seat height around 45–48 cm, with counter-height and bar-height variants. Side chairs and carver/arm chairs in matching profiles for head-of-table seating.
Styles and seats
Windsor, cross-back, ladder-back, slat and spindle backs; solid wood, cane/rush or upholstered seats in your fabric, leather or PU. Pair with rubberwood or mixed-wood dining tables for a complete set.
Want a coordinated program? We can match rubberwood chairs to tables, benches and barstools across the wider solid wood furniture range, consolidated into one compliant container.
Use cases
Where these chairs ship
Residential importers and retailers choose rubberwood for its true-hardwood feel at a competitive landed cost — a dependable everyday dining chair that photographs well in any finish. Online sellers and dropship programs take it flat-pack with Amazon-FBA-ready packaging to keep freight and returns low.
Hospitality and contract buyers — restaurants, cafés, hotels and bars — value the joint strength and finish durability under heavy daily turnover, specced assembled and install-ready. Private-label and OEM brands use rubberwood as a cost-stable platform to build a consistent dining collection across multiple finishes and back styles.
Care
Keeping rubberwood dining chairs their best
Rubberwood is kiln-dried and finish-sealed, so routine care is straightforward: wipe with a soft, slightly damp cloth and dry immediately — never leave standing moisture on the joints or seat. Avoid harsh solvents and abrasive pads, which can dull the lacquer. Keep chairs out of prolonged direct sun and away from radiators or HVAC vents to limit any seasonal movement, and check and snug fixings on knockdown models after assembly and during seasonal changes. For contract settings, felt glides protect both floor and leg ends under constant drag. We supply finish and care documentation with each program so your team and your end customers handle the product correctly.
Why source from us
Compliance-proven, breadth, scale
Documented, buyer-ready compliance
FSC chain-of-custody, Vriksh timber-legality verification, EUDR-ready geolocation due diligence, US Lacey Act support, UKTR, CARB / TSCA finishes, ISPM-15 packaging, plus ISO, SGS and SEDEX / SMETA. Certificate references go to serious buyers directly. See our EUDR readiness and timber due-diligence approach.
Single-source consolidation
Mix rubberwood dining chairs with tables, benches, metalware, marble and décor in one managed container — anchored in genuine Jodhpur solid-wood credibility.
Trial to container scale
Start with an LCL trial, then scale to repeat FCL volumes under managed QC, with 30–45 day typical lead and a factory visit available on prior intimation.
ODM, OEM and custom
Ready designs or full private-label, with CNC carving, bespoke prototyping and retail-ready, FBA-ready, branded or gift packaging. Learn more about rubberwood as a material.
Questions buyers ask
Rubberwood dining chair FAQs
Is rubberwood good for dining chairs?
Yes. Rubberwood (Hevea brasiliensis) is a dense, close-grained hardwood with strength and stiffness comparable to ash and maple, which makes it well suited to the stress points of a dining chair — the seat frame, legs and back joints. Its fine, even grain takes stain and lacquer cleanly, and it holds mortise-and-tenon and dowel joinery reliably, so chairs stay rigid through years of commercial and residential use.
What is the MOQ for rubberwood dining chairs?
A trial or sample order can ship LCL so you can assess build quality before committing. For best competitive pricing we ask for a 1 × 20ft FCL minimum, and you can mix rubberwood dining chairs with matching tables, benches and other categories inside the same container.
Are your rubberwood finishes CARB and TSCA compliant?
Yes. We can supply rubberwood dining chairs with CARB / TSCA Title VI formaldehyde-compliant finishes for the US market, and we document the finish system on request. Certificate references are shared directly with serious buyers rather than published.
Can rubberwood dining chairs ship flat-pack?
Yes. We produce both fully assembled and knockdown / flat-pack (RTA) rubberwood dining chairs. Flat-pack lowers freight cost and breakage and maximizes container density, which suits large importers and online sellers; assembled suits hospitality and contract buyers who want install-ready stock.
How long does a rubberwood dining chair order take?
Typical lead time is 30 to 45 days from confirmed sample and deposit. Urgent orders can be expedited at a premium. We ship from Mundra or Nhava Sheva on FOB or CIF terms.
Can you make rubberwood dining chairs to our own design or private label?
Yes. We work ODM from our ready designs and OEM for full custom and private-label programs — your dimensions, seat style, finish, upholstery and branded or retail-ready packaging. CNC carving and bespoke prototyping are available before a production run.
Start a program
Get rubberwood dining chairs quoted
Send your target styles, finishes, quantities and destination. We will confirm specification, pricing and lead time, and arrange a sample before you commit to a container.