Hairpin leg dining chairs — mid-century seating, manufactured for export.
A solid-wood seat on slim, powder-coated steel hairpin legs — the minimal mid-century look that ships flat-pack, loads dense and sells across retail, café and online channels. Manufacturer-direct, compliance-documented and container-ready, from a trial order up.
Two materials, one clean line — the chair that fills a container.
The hairpin leg is a mid-century idea: a single length of steel rod bent into a tapered two- or three-prong leg, bolted to a flat seat. Set under a solid-wood seat and back, it gives you a chair that looks light and architectural but stands on genuine hardwood and steel — not a moulded shell. For buyers, the appeal is as much commercial as aesthetic: the legs detach, so the chair knocks down to almost nothing, nests on a pallet, and lands far more units per container than a one-piece frame. Choose a ready design from our catalogue or hand us your own — we build the seat, bend and finish the legs, and pack it to your market's standard.
Solid wood, not veneer
Seats and backs are cut from kiln-dried hardwood — sheesham, mango, acacia or reclaimed wood — so the chair carries real grain and weight, and takes a finish cleanly.
Steel that holds its shape
Legs are bent from mild-steel rod and powder-coated or lacquered for a hard, chip-resistant surface in black, raw clear-coat, brass tone or your colour.
Built to ship flat
Bolt-on legs mean every chair is knock-down by design — lower freight per unit, near-zero transit breakage, and a higher piece count per container.
One leg, the full hardwood range.
Every hairpin chair carries the same slim steel leg; we pair it with the seat wood, profile and finish your channel sells. Mix woods and finishes across a single container, and add matching hairpin-leg tables and stools for a coordinated set.
Sheesham seat chairs
Dense Indian rosewood with deep, figured grain for a premium mid-century read that stands up to daily use.
Explore sheesham wood properties
Mango seat chairs
A cost-advantaged hardwood with a lustrous grain and a deforestation-free orchard story — the volume favourite.
Explore mango wood properties
Reclaimed & iron chairs
Old-wood seats on black powder-coated legs — the industrial-loft look with a genuine sustainability line.
Explore wrought-iron framesIndicative specs — every dimension and finish is made to your order.
Figures below are typical ranges for planning covers and container loads. We manufacture to your exact drawings and market requirements, so seat shape, leg height, rod gauge, finish and colour are all specified at the quote stage. Seats are kiln-dried for stability, and lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Seat wood | Solid sheesham · mango · acacia · reclaimed · rubberwood |
| Legs | Bent mild-steel rod · 2- or 3-prong hairpin · ~10–12 mm |
| Seat height | Approx. 45–48 cm (18–19 in) dining · counter / bar on request |
| Overall height | Approx. 80–90 cm with back |
| Seat width / depth | Approx. 42–48 cm wide · 40–45 cm deep |
| Leg finish | Powder-coat (black / white / colour) · raw clear-coat · brass / bronze tone |
| Wood finish | Natural oil/wax · stain · distressed · PU lacquer — CARB / TSCA-compliant |
| Assembly | Knock-down / flat-pack (RTA) standard · assembled on request |
| Customisation | ODM catalogue · OEM to drawings · private label · retail / FBA packing |
Where a hairpin chair earns its place.
Rooms and channels it sells into
The hairpin chair is a cross-channel workhorse. Retailers run it as an entry-price mid-century dining and desk chair; cafés, bars and co-working spaces buy it for its light footprint and quick wipe-down; interior designers specify it for Scandinavian, industrial and modern-organic schemes; and online sellers love that a flat carton ships cheaply and arrives unbroken. Pair it with a matching hairpin or wood-and-iron dining table to sell a complete set from one consolidated container.
Finish & care
Legs take a hard powder-coat in any colour, a raw steel clear-coat for the industrial look, or a brass / bronze tone; seats carry natural oil and wax, stains, distressed tones or PU lacquer, matched to your reference or Pantone. In use, wipe the seat with a barely-damp cloth and dry at once, re-oil natural finishes periodically, and — because the legs are bolted — check and re-tighten the fixings after the first few weeks. We ship bolts, washers, a hex key and a care note with every chair, and supply replacement hardware on request to support your warranty terms.
Seating that clears customs — not one that sits at the port.
The wooden seat is the regulated part of a hairpin chair, and we document it fully: FSC chain-of-custody and Vriksh timber-legality, with CITES-compliant handling of sheesham, EUDR-ready geolocation and deforestation-free due diligence, US Lacey Act declaration support and UK Timber Regulation readiness — all backed by ISO, SGS and SEDEX / SMETA audits and packed to ISPM-15. Certificate details go directly to serious buyers on request. See every certification and timber-legality document we hold.
| Term | Detail |
|---|---|
| Minimum order | Trial / sample LCL · then 1× 20ft FCL for best pricing |
| Lead time | 30–45 days typical · urgent at premium |
| Incoterms | FOB / CIF · ex Mundra / Nhava Sheva |
| Packing | Knock-down · flat carton · ISPM-15 · retail / FBA-ready |
| Design | ODM catalogue · OEM to drawings · private label |
Questions buyers ask about hairpin leg dining chairs.
What is a hairpin leg dining chair?
A hairpin leg dining chair pairs a solid-wood seat and back with slim, tapered steel-rod legs bent into the classic mid-century hairpin profile. The look is light and minimal, the footprint is small, and the metal legs bolt onto the wooden seat — so the chair reads as modern and craft at once. We build the seat in solid sheesham, mango, acacia or reclaimed wood, and powder-coat or lacquer the legs to your finish.
What is the minimum order for wholesale hairpin leg dining chairs?
A trial or sample set can ship LCL (part-container) so you approve the wood, the leg finish and the comfort first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and hairpin chairs consolidate easily with dining tables, benches and other furniture in a single mixed container. Typical lead time is 30–45 days after sample approval, with urgent orders at a premium.
Do hairpin leg dining chairs ship flat-pack to save freight?
Yes — this is the hairpin chair's biggest commercial advantage. Because the steel legs bolt onto the seat, every chair ships knock-down (RTA): the seats nest and the legs pack flat, raising the piece count per 20ft / 40ft container and cutting both freight cost and transit breakage. Each chair ships with its bolts, washers and a fitting note; fully assembled builds are available where a buyer prefers them.
Are hairpin leg dining chairs strong enough for restaurant and café use?
Yes. For contract projects we specify a heavier-gauge steel rod, weld and reinforce the leg-to-seat mounting plate, and thread the seat with machine inserts rather than wood screws so the joint survives daily stacking and cleaning. Seats are kiln-dried hardwood with commercial-grade CARB / TSCA-compliant finishes, and build spec can be held consistent across a full café or restaurant fit-out.
Can you make hairpin leg dining chairs to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, seat shape, leg height, rod gauge, finish and branding, with retail-ready or Amazon-FBA packaging. Send a reference image or a spec sheet and we prototype a sample to it, including matching hairpin-leg dining tables, benches and stools.
Are your hairpin leg dining chairs compliant for US and EU import?
Yes. We document FSC chain-of-custody and Vriksh timber-legality for the wooden seats, backed by ISO, SGS and SEDEX / SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA formaldehyde-compliant finishes and ISPM-15 export packing. Certificate details go directly to serious buyers on request.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the seat wood, leg finish, quantity and market. We confirm spec, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and flat-pack to your standard on a 30–45 day lead time.