Cane console tables, hand-woven in Jodhpur — wholesale for importers, retailers and hospitality.
Woven cane doors and shelf fronts on kiln-dried sheesham, mango and acacia frames — the warm, breathable, coastal-and-boho entryway table buyers ask for. Slim-footprint, high units per container, with the structure, compliance paperwork and container-readiness a serious import programme needs.
Woven cane for the face. Solid wood for the standing frame.
Cane is the thin, glossy outer skin peeled from the rattan palm — the same material used for the classic woven webbing seen on chair backs and cabinet doors. On its own it is decorative, not structural. We hand-weave it into the cabinet doors, a lower shelf front or a webbed end panel of a kiln-dried solid-wood frame, so the timber (or a wood-and-wrought-iron structure) carries the top, the drawers and the day-to-day load of a working entryway, while the cane gives the console its airy, light-filtering face and natural-fibre warmth. The result reads as genuine craft on a retail shelf and holds up in a real hallway or hotel lobby — not a particleboard table with a cane-print veneer.
The slim, high-margin, container-filling console that sells itself.
On-trend, broad appeal
Woven cane anchors the coastal, boho, Scandi-natural and resort schemes that dominate entryway and living-room buying. One console suits a home hallway, a boutique window, a café foyer or a hotel suite — a photogenic, on-trend SKU for retail shelves and online listings alike.
Narrow footprint, high density
A console is slim by design — roughly 30–40 cm deep — so it packs tight and ships many units per container, and the open cane weave keeps it visually light against a wall. Strong shelf margins on a small cubic volume make it one of the easiest pieces to slot into a mixed load.
Honest, sellable craft
Hand-woven cane on a solid-wood frame carries a sustainability and heritage story your customers pay for — a credible, deforestation-free alternative to mass-market particleboard furniture, and a clean fit for diversify-from-China sourcing.
Indicative specs — every frame wood, weave and finish is made to your order.
Figures below are typical wholesale ranges for reference. We manufacture to your exact drawings and market requirements, so size, frame material, weave density, storage layout, top and finish are all confirmed at the quote stage. Lot and finish traceability is documented where applicable, and a sample is produced before any production run.
| Attribute | Typical range / options |
|---|---|
| Frame woods | Solid sheesham, mango, acacia (kiln-dried); reclaimed or teak on request |
| Frame & metal | All-wood, or wood with powder-coated wrought iron; brass accents optional |
| Woven panels | Hand-woven natural cane webbing on doors, shelf front or end panels · open or closed pattern · synthetic PE for humid rooms |
| Width | 100–120 cm standard · 80 cm narrow hallway · 140–180 cm sofa-back / extra-long (made to spec) |
| Depth | 30–40 cm slim footprint for passageways and entryways |
| Height | 75–80 cm (surface aligns with standard sofa backs) |
| Storage | Cane-fronted cabinet doors · one or two drawers · open lower shelf |
| Top | Solid-wood, marble, stone or tempered-glass top |
| Hardware & detail | Brass or iron handles and pulls; soft-close doors; bone-inlay or carved trim on request |
| Finish | Natural, honey, walnut, distressed, two-tone, white-wash — CARB/TSCA Title VI compliant |
| Assembly | Assembled or knock-down / flat-pack (RTA) to raise container density |
| Packing | Export carton · ISPM-15 heat-treated · retail / Amazon-FBA-ready on request |
| Model | ODM (our designs) + OEM (your drawings, finish & private label) |
| MOQ & lead time | Trial via LCL; thereafter 1× 20ft FCL for best pricing; 30–45 days after sample approval |
Built for the room — and the channel — you're filling.
Retail & online
Flat-packed cane consoles raise container density, cut freight per unit and protect the woven doors in transit — ideal for retailers and marketplace sellers. We pack retail-ready and Amazon-FBA-ready, under your brand, with ODM catalogue designs or your own via private-label manufacturing.
Hospitality & contract
For lobbies, hallways, suites and café foyers we reinforce joints, double-weave high-wear panels, fit soft-close hardware and can add a sealed stone top, so the console takes daily use. See how we build for hotel, restaurant and café projects.
Import-ready on every container
Our solid-wood frames ship with FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of Dalbergia sissoo (sheesham), backed by ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA formaldehyde-compliant finishes and ISPM-15 export packing — so your consoles clear the port instead of sitting in it. See every certification we hold.
Care & longevity
Natural cane likes an occasional light damp wipe and good air; keep the console out of direct rain and prolonged sun, and wipe spills promptly. Use coasters under planters and vases, and re-seal any marble or stone top periodically for stain resistance. Re-oil natural-wood finishes from time to time, and loosened weave is rare and simple to restore — a light mist on the panel underside and air-drying brings back the spring. We share care guidance with every order so your buyers keep the piece selling for years.
Specify the right fibre for the setting.
Natural cane is the authentic, premium choice for indoor and covered entryways, hallways and lobbies. For humid rooms, bathrooms-adjacent hallways or open verandas we build the same console in weather-resistant synthetic (PE) weave, so a single collection can run both an indoor natural line and an outdoor-ready line without changing the silhouette.
| Consideration | Natural cane | Synthetic (PE) weave |
|---|---|---|
| Best use | Indoor & covered entryways | Humid rooms & covered terraces |
| Look | Authentic, warm, premium | Cane-look, uniform |
| Weather | Protect from rain & sun | UV & water resistant |
| Frame | Solid wood | Solid wood or powder-coated iron |
| Sustainability | Renewable natural fibre | Durable, recyclable polymer |
Cane console tables — wholesale & export FAQ
What is a cane console table made of?
A cane console table is a slim wall or entryway table with a kiln-dried solid-wood frame — sheesham, mango or acacia — fronted with hand-woven cane on its cabinet doors, lower shelf or a webbed base panel. Cane is the glossy outer skin peeled from the rattan palm; it gives the light, breathable, coastal-and-boho face while the timber (or a wood-and-iron frame) carries the top, the drawers and the load. Every console has a solid-wood heart — we do not supply plywood-only or panel units.
Are cane console tables strong enough for hotels and high-traffic entryways?
Yes, when the frame does the work. We build the structure in kiln-dried solid wood or powder-coated wrought iron so the console stands square under daily use, reinforce the top-to-leg and door joints, and finish with hard-wearing CARB/TSCA-compliant lacquer. For lobby and hallway use we double-weave the cane panels, fit soft-close door hardware, and can add a sealed marble or stone top so keys, bags and spills never reach the wood.
Can cane console tables be used in humid rooms or covered verandas?
Natural cane is best for indoor or fully covered, shaded settings — entryways, hallways, lounges, lobbies and covered verandas — away from direct rain and prolonged sun, which dry out and fade natural fibre. For humid rooms or open terraces we build the same console silhouette in weather-resistant synthetic (PE) weave on a solid-wood or powder-coated iron frame, so one collection can run an indoor natural line and an outdoor-ready line.
Can you make cane console tables to our own design or private label?
Yes. We work as both ODM, from our own catalogue, and OEM — manufacturing to your drawings, dimensions, weave pattern, storage layout, finish and hardware, with custom CNC-cut frames, your branding and retail-ready or Amazon-FBA-ready packaging. Send a reference image or spec and we prototype to it before any production run.
What is the minimum order and lead time for wholesale cane console tables?
A trial or sample order can ship LCL (part-container) so you approve the wood, weave and finish first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate consoles with sideboards, mirrors, side tables and décor into one mixed container. Typical lead time is 30–45 days after sample approval; urgent orders at a premium.
Do cane console tables ship flat-pack to save freight?
Many cane consoles ship knock-down / flat-pack (RTA) with detachable legs and top and the woven doors protected, which lowers freight cost, cuts transit breakage and raises container density — ideal for large importers and online sellers. Fully assembled builds are available where the design or buyer prefers. All solid-wood frames use ISPM-15 heat-treated export packing.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the size, quantity and market. We confirm frame material, weave, storage layout, finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time. Browse the full console table range for other materials, or quote this one now.