Cane bar carts, hand-woven in Jodhpur — wholesale for importers, retailers and hospitality.
Woven cane tiers on kiln-dried sheesham, mango and acacia frames, rolling on lockable castors with bottle rails and stemware holders. The warm, breathable, boho-and-resort serving trolley buyers ask for — with the structure, compliance paperwork and container-readiness a serious import programme needs.
Woven cane for the face. Solid wood for the rolling frame.
Cane is the thin, glossy outer skin peeled from the rattan palm — the same material used for the classic woven webbing seen on chair backs and cabinet doors. On its own it is decorative, not structural. We hand-weave it into the shelf fronts, lower tier or an enclosed base of a kiln-dried solid-wood frame, so the timber (or a wood-and-wrought-iron structure) carries the castors, the shelves and the weight of a loaded bar, while the cane gives the cart its airy, light-filtering face and natural-fibre warmth. The result reads as genuine craft on a retail shelf and survives real service behind a working bar — not a particleboard trolley with a cane-print veneer.
The high-margin, container-filling trolley that sells itself.
On-trend, broad appeal
Woven cane anchors the coastal, boho, Scandi-natural and resort schemes that dominate living-room and hospitality buying. One cart suits a home lounge, a boutique corner, a café back-bar or a hotel suite — a photogenic, on-trend SKU for retail and online listings alike.
Light face, real mobility
The open weave keeps the cart visually light while the solid-wood or iron frame rolls on lockable castors and holds bottle rails, stemware racks and a lower storage tier — a serving trolley that moves between lobby, lounge and terrace yet still reads as a statement piece.
Honest, sellable craft
Hand-woven cane on a solid-wood frame carries a sustainability and heritage story your customers pay for — a credible, deforestation-free alternative to mass-market particleboard drinks trolleys, and a clean fit for diversify-from-China sourcing.
Indicative specs — every frame wood, weave and finish is made to your order.
Figures below are typical wholesale ranges for reference. We manufacture to your exact drawings and market requirements, so format, frame material, weave density, top and finish are all confirmed at the quote stage. Lot and finish traceability is documented where applicable, and a sample is produced before any production run.
| Attribute | Typical range / options |
|---|---|
| Frame woods | Solid sheesham, mango, acacia (kiln-dried); reclaimed or teak on request |
| Frame & metal | All-wood, or wood with powder-coated wrought iron; brass accents optional |
| Woven panels | Hand-woven natural cane webbing · open or closed pattern · synthetic PE for humid/outdoor |
| Tiers & tops | Two or three tiers; solid-wood, marble, stone or tempered-glass serving top |
| Storage | Bottle rails, stemware/glass holders, lower cane tier, optional drawer |
| Mobility | Lockable castered wheels (commercial-grade for hospitality) or fixed base |
| Typical footprint | Approx. 70–85 cm W · 40–50 cm D · 75–90 cm H (made to spec) |
| Hardware & detail | Brass or iron handles and rails; bone-inlay or carved trim on request |
| Finish | Natural, honey, stained, distressed, two-tone, white-wash — CARB/TSCA Title VI compliant |
| Assembly | Assembled or knock-down / flat-pack (RTA) to raise container density |
| Packing | Export carton · ISPM-15 heat-treated · retail / Amazon-FBA-ready on request |
| Model | ODM (our designs) + OEM (your drawings, finish & private label) |
| MOQ & lead time | Trial via LCL; thereafter 1× 20ft FCL for best pricing; 30–45 days after sample approval |
Built for the room — and the channel — you're filling.
Retail & online
Flat-packed cane bar carts raise container density, cut freight per unit and protect the woven shelves in transit — ideal for retailers and marketplace sellers. We pack retail-ready and Amazon-FBA-ready, under your brand, with ODM catalogue designs or your own via private-label manufacturing.
Hospitality & contract
For lounges, cafés, bars and guest rooms we reinforce joints, fit lockable commercial castors, double-weave high-wear panels and can add a sealed stone serving top, so the cart takes daily service. See how we build for hotel, restaurant and café projects.
Import-ready on every container
Our solid-wood frames ship with FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of Dalbergia sissoo (sheesham), backed by ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA formaldehyde-compliant finishes and ISPM-15 export packing — so your carts clear the port instead of sitting in it. See every certification we hold.
Care & longevity
Natural cane likes an occasional light damp wipe and good air; keep the cart out of direct rain and prolonged sun, and wipe spills promptly. Use coasters under bottles, and re-seal any marble or stone top periodically for stain resistance. Castors are lockable and serviceable, and loosened weave is rare and simple to restore — a light mist on the panel underside and air-drying brings back the spring. We share care guidance with every order so your buyers keep the cart selling for years.
Specify the right fibre for the setting.
Natural cane is the authentic, premium choice for indoor and covered bars. For open-air terraces, poolside service and high-humidity rooms we build the same cart in weather-resistant synthetic (PE) weave, so a single collection can run both an indoor natural line and an outdoor-ready line without changing the silhouette.
| Consideration | Natural cane | Synthetic (PE) weave |
|---|---|---|
| Best use | Indoor & covered bars | Open-air & poolside |
| Look | Authentic, warm, premium | Cane-look, uniform |
| Weather | Protect from rain & sun | UV & water resistant |
| Frame | Solid wood | Solid wood or powder-coated iron |
| Sustainability | Renewable natural fibre | Durable, recyclable polymer |
Cane bar carts — wholesale & export FAQ
What is a cane bar cart made of?
A cane bar cart is a wheeled serving trolley with a kiln-dried solid-wood frame — sheesham, mango or acacia — carrying one or more tiers faced or railed with hand-woven cane. Cane is the glossy outer skin peeled from the rattan palm; it gives the light, breathable, resort look while the timber (or a wood-and-iron frame) carries the castors, the shelves and the weight of bottles and glassware. Every cart has a solid-wood heart; we do not supply plywood-only or panel units.
Are cane bar carts strong enough for hotels, bars and restaurants?
Yes, when the frame does the work. We build the structure in kiln-dried solid wood or powder-coated wrought iron so the cart rolls square under daily service, reinforce the shelf and caster joints, and finish with hard-wearing CARB/TSCA-compliant lacquer. For back-bar and lounge use we double-weave high-wear cane panels, fit lockable commercial castors, and can add a sealed marble or stone top so spills and bottle rings never reach the wood.
Can cane bar carts be used on humid or outdoor terraces?
Natural cane is best for indoor or fully covered, shaded settings — lounges, lobbies, verandas and covered terraces — away from direct rain and prolonged sun, which dry out and fade natural fibre. For open-air or poolside bars we build the same cart silhouette in weather-resistant synthetic (PE) weave on a solid-wood or powder-coated iron frame, so one collection can run an indoor natural line and an outdoor-ready line.
Can you make cane bar carts to our own design or private label?
Yes. We work as both ODM, from our own catalogue, and OEM — manufacturing to your drawings, dimensions, weave pattern, tier count, finish and hardware, with custom CNC-cut frames, your branding and retail-ready or Amazon-FBA-ready packaging. Send a reference image or spec and we prototype to it before any production run.
What is the minimum order and lead time for wholesale cane bar carts?
A trial or sample order can ship LCL (part-container) so you approve the wood, weave and finish first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate bar carts with bar cabinets, side tables and décor into one mixed container. Typical lead time is 30–45 days after sample approval; urgent orders at a premium.
Do cane bar carts ship flat-pack to save freight?
Many cane bar carts ship knock-down / flat-pack (RTA) with the woven shelves protected and castors boxed separately, which lowers freight cost, cuts transit breakage and raises container density — ideal for large importers and online sellers. Assembled builds are available where the design or buyer prefers. All solid-wood frames use ISPM-15 heat-treated export packing.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the format, quantity and market. We confirm frame material, weave, finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time. Browse the full bar cart range for other materials, or quote this one now.