Wrought iron bar cabinets, hand-forged in Jodhpur — wholesale for importers, retailers and hospitality.
Forged-iron frames and mesh-grille fronts over a solid-wood carcass — with bottle storage, stemware rails and a working top built in. The industrial and farmhouse look, manufacturer-direct, compliance-documented and container-ready from a trial order up.
A wrought iron bar cabinet is the piece that anchors a whole drinks corner.
The forged-iron base under a mango-wood or reclaimed-timber body is the look that put Jodhpur on export shelves — industrial, honest, a little raw, and unmistakably hand-made. Wrought iron is low-carbon iron worked hot, so each frame carries the slight irregularity and density of real forging rather than the hollow lightness of tube steel. We build it the honest way: the iron does the visible structure, the scrollwork and the grille fronts; a solid-wood carcass carries the weight, holds the hinges and houses the bottles, stemware and glassware. Choose a ready design from our catalogue or hand us your own drawing and brand.
Iron on the frame, solid wood doing the structure.
Wrought iron reaches a cabinet in several distinct ways — and each changes the price, the weight and the look. We match the construction to how you sell and ship it.
Forged frames & scrollwork
Hand-hammered iron legs, cross-bracing and decorative scroll or lattice panels wrapped around a wood box — the classic rustic and vintage build, strong enough for a loaded, working bar.
Mesh & grille door fronts
Airy iron-mesh or bar-grille doors that show the bottles behind and read light and industrial — the step-up that ventilates the interior and ships at lower weight than a solid metal front.
Iron hardware & detailing
Forged handles, gallery rails, hinges, corner straps and tapered feet that lift a clean-lined or carved wood cabinet — lowest material cost and the simplest line to volume-produce.
Whatever the build, the carcass, shelves and doors use a genuine solid-wood component so the cabinet survives a working bar. Read how the metal itself behaves — forging, finishes and rust control — on our wrought iron material guide, or compare every wood and build on the bar cabinets hub.
One metal, many looks — matched to your sample before we cut a container.
Powder-coat colours
A baked powder coat in matt black, gunmetal, bronze, white or a custom RAL colour — the hardest-wearing, most consistent finish and the standard for high-traffic restaurant and bar floors.
Antique & raw-industrial
A chemically aged antique iron tone, or a bare steel sealed under clear wax or lacquer for the honest raw-metal look — distressed on purpose so the cabinet reads consistent from day one.
Working bar interior
Adjustable shelves, bottle dividers, stemware rails, a pull-out serving surface and an optional marble-topped or wood back — specified to your service, in the wood and finish you choose.
Indicative specs — every dimension, finish and interior is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so cabinet size, iron work, interior fit-out and wood are all specified at the quote stage. Material and lot traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Iron work | Forged frame & scrollwork · mesh / grille fronts · hardware & feet |
| Carcass wood | Mango, acacia, sheesham, reclaimed/old wood |
| Iron finish | Powder-coat (black, gunmetal, bronze, white, custom RAL) · antique · raw waxed/lacquered |
| Interior | Adjustable shelves · bottle dividers · stemware rails · drawers · serving surface |
| Top option | Solid wood, marble/stone or reclaimed plank on request |
| Width | Approx. 80–140 cm (custom on request) |
| Height | Approx. 90–180 cm — sideboard-height or tall cabinet |
| Wood finish | Natural, stained, distressed, matt/satin lacquer — CARB/TSCA-compliant |
| Assembly | Knock-down / flat-pack (RTA) or assembled — removable top & bolt-together frame |
| Packing | Export carton · ISPM-15 · retail / FBA-ready on request |
Built for the floor, engineered for the container.
Made for hospitality & retail
The industrial wood-and-iron bar cabinet suits hotel lounges, restaurants, cafés, boutique retail and home drinks corners alike — it photographs well in a catalogue and it stands up to commercial handling. We build the carcass to commercial-use expectations, powder-coat the iron for the wear your setting demands, and QC each lot. See the full range we make for hotels, restaurants and bars.
Freight-smart & import-ready
Iron is dense, so freight matters — we engineer most cabinets with removable wood tops and bolt-together frames to lower breakage and maximise container density. On the paperwork side, the wood carcass and the container clear with FSC, Vriksh, EUDR-ready and CARB/TSCA documentation. See every certification we hold.
Wrought iron bar cabinets — wholesale & export FAQ
What is a wrought iron bar cabinet?
A wrought iron bar cabinet is a drinks-storage cabinet built on a hand-forged iron frame with a solid-wood carcass, shelves and doors. The iron is low-carbon metal worked hot — hammered, bent and welded — into the legs, the structural frame, scrollwork and often a mesh or grille door front, while mango, acacia, sheesham or reclaimed timber forms the top, the shelves and the box that holds bottles and glassware. That pairing gives the industrial, loft and farmhouse look buyers know, with the strength of steel and the warmth of real wood. Every cabinet has at least one solid-wood component; we do not supply plywood-only or panel units.
Is a wrought iron bar cabinet strong enough for a working bar?
Yes. Forged iron is tough and rigid rather than brittle, so a wrought iron bar cabinet carries loaded bottle shelves, a marble or wood serving top and years of commercial handling without racking or sagging. We build the carcass and joinery to commercial-use expectations, bolt the frame for a solid stance, and QC each lot. It is well suited to hotel lounges, restaurants, cafés and bars as well as home drinks corners.
How do you stop a wrought iron bar cabinet from rusting?
Rust control starts at the factory: bare steel is cleaned and degreased, given a phosphate or zinc-rich primer, then sealed with either a baked powder coat or a hand-applied wax or lacquer for the raw-industrial look. In normal indoor bar use that finish is stable; keep the metal dry, wipe spills promptly and touch up any chips. We supply matching touch-up finish and full finish specifications with each order, and for humid or covered-patio settings we specify a UV-stable powder coat.
What is the minimum order for wholesale wrought iron bar cabinets?
A trial or sample order can ship LCL (part-container) so you can approve the forging, finish, wood and build first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate wrought iron bar cabinets with console tables, sideboards, shelving, metalware and décor into a single mixed container.
Can you make wrought iron bar cabinets to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — forging and building to your drawings, dimensions, powder-coat colour, wood and interior fit-out, with custom CNC and metal fabrication, your branding and retail-ready or Amazon-FBA packaging. Send a reference image or a spec and we prototype to it before any production run.
Are your wrought iron bar cabinets heavy to ship, and are they import-compliant?
Iron is dense, so we engineer most cabinets as knockdown or flat-pack — removable wood tops and bolt-together frames — to lower breakage and maximise container density. On compliance, the iron is a metal but the solid-wood carcass and the wider container still clear, so we document FSC chain-of-custody, Vriksh timber-legality and CITES-compliant sheesham handling, with ISO, SGS and SEDEX/SMETA audits, EUDR-ready due diligence, US Lacey Act support, UK Timber Regulation, CARB/TSCA finishes and ISPM-15 export packing. We ship FOB or CIF from Mundra or Nhava Sheva.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, powder-coat or antique finish, interior, quantity and market. We confirm the iron work, wood, fit-out, MOQ and a FOB/CIF price, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.