Teak bar cabinets, handcrafted in India — wholesale for importers, retailers and hospitality.
Solid teak carcasses with bottle storage, stemware rails and a working serving surface — the one bar cabinet that performs indoors, in a humid room and on a covered terrace alike. Manufacturer-direct, compliance-documented and container-ready, from a trial order up.
Teak turns a drinks cabinet into a piece you can place anywhere.
Most bar cabinets are built for a dry, climate-controlled room. A teak bar cabinet isn't bound by that. Teak (Tectona grandis) carries its own weather protection in the grain — natural oils and silica that repel water, resist rot and deter insects — so the same cabinet suits a home lounge, a steamy wet bar, a boutique hotel suite, a covered patio bar or a poolside service station. It reads as premium on sight, with a warm golden-brown grain that commands a shelf and project premium, and it lasts the way buyers expect teak to last. Choose a ready design from our catalogue or hand us your own drawing and brand.
A wet environment is exactly where teak earns its premium.
A bar is one of the most demanding places in a room — spills, condensation, humidity and heavy daily handling. Teak answers all four, which is why it is the wood designers specify when the drinks corner has to survive, not just look good.
Moisture & spill resistant
Teak's natural oils shrug off the condensation, ring-marks and splashes a working bar produces, where a thirstier hardwood would stain, swell or lift its finish. Ideal for wet bars and humid rooms.
Dimensionally stable
Low movement and minimal warping mean doors stay square and drawers keep running true through seasonal humidity swings — critical for a cabinet full of glass and bottles that must open cleanly every time.
Indoor or outdoor ready
The same construction serves a lounge, a conservatory or a covered terrace. Left natural, outdoor teak silvers to a soft grey patina; kept lightly oiled, it holds its golden tone.
Teak also takes crisp carving and CNC detail without chipping, so fluted doors, latticed stemware panels and statement fronts hold fine work. Read how the wood itself behaves — grain, durability, finishes and care — on our teak material guide, or compare every wood and build on the bar cabinets hub.
One wood, many builds — matched to your sample before we cut a container.
Tall cabinet or sideboard-height
A full-height drinks cabinet with upper display and lower storage, or a low sideboard-height bar that doubles as a serving console — carved, clean-lined mid-century, colonial or rustic, to suit your range.
Working bar interior
Dovetailed drawers, adjustable shelves, bottle dividers, stemware rails, a pull-out serving surface and an optional mirrored or marble-topped back — specified to your service.
Metal & mixed detail
Pair teak with wrought-iron frames or brass hardware, gallery rails and fluting for an industrial or luxe look — the solid-wood heart stays teak so the cabinet survives the floor.
For indoor pieces we apply CARB / TSCA-compliant low-emission lacquers in matt, satin, natural or oiled tones; for outdoor and wet-area cabinets we leave teak natural or lightly teak-oiled and specify corrosion-resistant fittings. Every build is assembled or knock-down / flat-pack (RTA) for container density.
Indicative specs — every dimension, finish and interior is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so cabinet size, carving, interior fit-out and finish are all specified at the quote stage. Teak grade varies by log; material and lot traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Wood | Solid teak (Tectona grandis) carcass, doors, shelves & drawers |
| Colour | Golden-brown; weathers to silver-grey untreated outdoors |
| Interior | Adjustable shelves · bottle dividers · stemware rails · drawers · serving surface |
| Top option | Solid teak, marble/stone or mirrored back on request |
| Metal detail | Optional wrought-iron frame · brass hardware, rails & feet |
| Width | Approx. 80–140 cm (custom on request) |
| Height | Approx. 90–180 cm — sideboard-height or tall cabinet |
| Use | Indoor, humid / wet bar, covered terrace, poolside, hospitality |
| Finish | Natural, teak-oil, matt / satin lacquer — CARB/TSCA-compliant indoor |
| Assembly | Assembled or knock-down / flat-pack (RTA) for container density |
| Packing | Export carton · ISPM-15 heat-treated · retail / FBA-ready on request |
Built for the floor, documented for the port.
Made for hospitality & outdoor service
Teak's durability and prestige both matter on a commercial floor, and its weather resistance opens up settings closed to other woods — resort terrace bars, poolside stations, conservatory lounges and boutique suites. We build the carcass to commercial-use expectations and QC each lot. See the full range we make for hotels, restaurants and bars.
Import-ready & easy to care for
Indoor teak needs only a wipe with a soft cloth; outdoor teak needs occasional cleaning and, if a golden tone is wanted, periodic teak-oil — otherwise it silvers on its own with no finish required. On the paperwork side, the timber and the container clear with FSC, Vriksh, EUDR-ready and CARB/TSCA documentation. See every certification we hold.
Teak bar cabinets — wholesale & export FAQ
What is a teak bar cabinet?
A teak bar cabinet is a drinks-storage cabinet built in solid teak (Tectona grandis) — the carcass, doors, shelves and dovetailed drawers are teak, fitted out for bottles, stemware and a serving surface. Teak is chosen because its natural oils and silica resist moisture, rot and insects, so the cabinet performs in humid rooms, near a wet bar, on a covered terrace or poolside where other hardwoods swell and fail. Freshly worked teak is a warm golden-brown; left outdoors untreated it weathers to a silver-grey patina. We build every cabinet with at least one solid-wood component and do not supply plywood-only or panel units.
Can a teak bar cabinet be used outdoors?
Yes — this is teak's signature advantage over sheesham, mango or brass-clad bar cabinets. Teak's high natural oil and silica content lets it survive sun, rain, humidity and salt air without a protective coating, which makes it the right wood for covered patio bars, poolside and terrace service, resort outdoor lounges and conservatories. Left natural it silvers gracefully; kept lightly teak-oiled it holds its golden tone. For doors and metal hardware exposed to weather we specify corrosion-resistant fittings and a drainage-friendly interior.
What is the minimum order for wholesale teak bar cabinets?
A trial or sample order can ship LCL (part-container) so you can approve the teak grade, finish, interior and build first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate teak bar cabinets with sideboards, console tables, outdoor furniture, décor and metalware into a single mixed container.
Can you make teak bar cabinets to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, dimensions, teak finish and interior fit-out, with custom CNC carving, your branding and retail-ready or Amazon-FBA packaging. Send a reference image or spec and we prototype to it before any production run.
Are your teak bar cabinets compliant for US and EU import?
Yes. Teak is a tropical timber that sits squarely inside the regulations tightening across your markets, so we document FSC chain-of-custody, Vriksh timber-legality and EUDR-ready due diligence with geolocation and deforestation-free sourcing records. We support US Lacey Act declarations and UK Timber Regulation, apply CARB / TSCA-compliant finishes to indoor pieces, add SEDEX/SMETA, ISO and SGS, and pack in ISPM-15 heat-treated export cartons.
What is the lead time for a teak bar cabinet order?
Typical production is 30–45 days after sample approval, depending on quantity, the amount of carving and the interior fit-out. Urgent orders can be accommodated at a premium. We ship FOB or CIF from Mundra or Nhava Sheva.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the style, finish, interior, quantity and market — and whether the cabinet is for indoor or outdoor service. We confirm the teak grade, build, fit-out, MOQ and a FOB/CIF price, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.