Side Tables · Solid Rubberwood
Rubberwood Side Tables — Manufactured & Exported from Jodhpur
Dense, close-grained plantation hardwood with a clean, even finish — built as fully assembled or flat-pack units, documented FSC chain-of-custody, and finished to CARB / TSCA standards for the US and EU trade.
What a rubberwood side table is — and why it travels well
Rubberwood (Hevea brasiliensis, also called parawood) is the timber harvested from latex-producing rubber trees once they reach the end of their tapping life. Because the tree is already grown for its latex, the wood is effectively a by-product of an existing plantation cycle — one of the reasons it is a dependable, cost-advantaged hardwood for volume furniture programs.
For a side table, the properties matter: rubberwood is a dense, close-grained hardwood with a Janka hardness in the range of ash and maple, so it resists everyday dents and holds crisp edge profiles, chamfers, and turned legs. Its pale, near-uniform grain takes stain and lacquer evenly, which keeps colour consistent across a full container run — a practical advantage when you are buying hundreds of identical units rather than one showroom piece.
Properties & benefits at a glance
Hard & dent-resistant
Close-grained hardwood that holds crisp edges and turned detail, so tops and legs survive handling, retail floors, and contract use.
Even, consistent finish
Pale uniform grain accepts stain and lacquer predictably — reliable colour match unit-to-unit across large repeat orders.
Plantation-sourced
Timber recovered at the end of a latex tree's working life — a deforestation-free story that lands well with EU and US buyers.
Stable when kiln-dried
Properly kiln-dried and finish-sealed stock minimizes movement and checking in heated or air-conditioned interiors.
Cost-advantaged hardwood
Delivers solid-hardwood performance at competitive cost — a strong line for price-sensitive but quality-led ranges.
Flat-pack friendly
Clean machining and straightforward joinery make it well suited to knockdown / RTA builds that ship dense and assemble fast.
Finishes, sizes & configurations
We build rubberwood side tables as pure solid wood or in mixed-material constructions — solid rubberwood tops on wrought-iron bases, with marble or stone inset tops, cane or rattan shelves, or brass accents. Everything carries at least one solid-wood component, in line with how we build across the range.
| Attribute | Options |
|---|---|
| Primary wood | Solid rubberwood (Hevea brasiliensis / parawood) |
| Construction | Fully assembled or knockdown / flat-pack (RTA) |
| Finishes | Natural, clear lacquer, matte or satin PU, stained (walnut / oak / teak tones), whitewash, distressed; CARB / TSCA Title VI formaldehyde-compliant coatings |
| Mixed materials | Wrought-iron base, marble / stone top, cane / rattan shelf, brass accents, glass |
| Typical form factors | Round / square / rectangular tops; single or two-tier; drawer or open-shelf; C-table and nesting sets |
| Custom dimensions | Made-to-spec height, diameter, and top thickness on OEM orders |
| Packaging | Export carton, retail-ready, Amazon-FBA-ready, branded / gift packaging |
| Export packaging | ISPM-15 heat-treated / fumigated where required |
Exact dimensions and tolerances are confirmed per order. For style and finish direction across the material, see our rubberwood material and sourcing guide.
Where rubberwood side tables fit
Retail & online ranges
Consistent finish and flat-pack economics suit independent retailers, chains, and online sellers running Wayfair, Amazon, or Etsy listings with FBA-ready packaging.
Hospitality & contract
Dent-resistant tops hold up in hotel rooms, cafés, lounges, and reception areas — specify finishes and dimensions to your fit-out brief.
Private-label & OEM brands
We build to your drawings and finish standards, then ship under your branding — the manufacturer behind the look.
Interior designers & developers
Bespoke sizes, finish matching, and mixed-material tops for residential projects and Gulf developer fit-outs.
Care & handling
Rubberwood is low-maintenance when finished and treated correctly. A few guidelines keep units looking right through transit and in service:
- Wipe with a soft, slightly damp cloth and dry immediately; avoid soaking and harsh solvents that can lift lacquer.
- Use coasters and felt pads — the sealed surface resists marks but is not immune to standing moisture or heat.
- Keep units away from direct, prolonged heat sources to minimize movement in dry interiors.
- For contract settings, specify a satin or matte PU finish for easier spot-cleaning and scuff resistance.
Our stock is kiln-dried and finish-sealed before packing, and we document lot and finish batches so your QC and reorders stay consistent.
Why source rubberwood side tables from us
Documented & compliant
FSC chain-of-custody, Vriksh legality verification, and EUDR-ready due-diligence with geolocation. US Lacey Act and UK Timber Regulation documentation on request — certificate numbers shared 1:1 with serious buyers.
Trial to full container
Ship a sample LCL, then scale to 20ft and 40ft FCL. Mixed-category containers let you consolidate side tables with the rest of our solid-wood furniture range in one compliant shipment.
Made in the Jodhpur hub
Our own factory plus a vetted multi-cluster network, QC-governed, with a typical 30-45 day lead time. Factory visit available on prior intimation.
Frequently asked questions
Is rubberwood good for side tables?
Yes. Rubberwood (Hevea brasiliensis) is a dense, close-grained hardwood with a Janka hardness comparable to ash and maple, so it resists dents and holds crisp edges and turned legs well. Its pale, near-uniform grain takes stain and lacquer evenly, making it ideal for side tables that need a clean, consistent finish across a container run.
Where does your rubberwood come from and is it sustainable?
Our rubberwood is sourced from plantation Hevea trees harvested at the end of their latex-producing life, so the timber is a by-product of an existing agricultural cycle rather than virgin forest. We supply it under FSC chain-of-custody with Vriksh timber-legality verification and EUDR-ready due-diligence and geolocation documentation.
Can I order rubberwood side tables flat-pack or knocked down?
Yes. We produce rubberwood side tables as fully assembled or as knockdown / flat-pack (RTA) units. Flat-pack lowers freight cost and breakage and maximizes container density — a practical choice for large importers and online sellers using FBA-ready or branded packaging.
What is the minimum order for rubberwood side tables?
A trial or sample order can ship LCL. For best competitive pricing, the minimum is one 20ft FCL, and we support mixed-category containers so you can consolidate side tables with other wood, metal, and décor lines in one compliant shipment.
Are the finishes safe for the US and EU markets?
Yes. We finish with CARB / TSCA Title VI formaldehyde-compliant coatings and can supply US Lacey Act declaration support, UK Timber Regulation documentation, and ISPM-15 heat-treated export packaging. Certificate numbers are shared directly with serious buyers on request.
Can you make rubberwood side tables to our own design or private label?
Yes. We work ODM from our ready designs and OEM for full custom, private-label, and make-to-spec builds, including CNC carving, bespoke dimensions, finish matching, and branded or retail-ready packaging.
Start your rubberwood program
Get a quote on rubberwood side tables built to your spec
Send dimensions, finishes, target volumes, and destination — we'll come back with options, compliance documentation, and competitive FOB / CIF pricing.