Mid-century modern nightstands, handcrafted in India — wholesale for importers, retailers and hospitality.
Tapered legs, a clean splayed stance and a warm walnut-toned grain on a solid-wood carcass with smooth-running drawers — the bedside table that photographs like a hero and sells in pairs. Manufacturer-direct, compliance-documented and container-ready, from a trial order up.
Mid-century modern is the most durable bedside trend in the market — and it sells in twos.
Seventy years on, the mid-century nightstand is still the format buyers reorder: a low, clean body lifted on tapered or angled legs, a flush drawer face, a warm wood grain and almost no visible hardware. It suits the apartment, the design-led hotel room and the online range alike, which is why it stays in catalogues while other looks turn over. We build it the honest way — a solid-wood carcass and drawer boxes doing the work, legs turned from the same timber or supplied as powder-coated iron, and the splayed stance and rounded edges graded so a pair reads identical from the first carton. Choose a ready design from our catalogue, or hand us your own drawing and we build to it.
The details that separate the real look from a laminate copy.
A mid-century nightstand lives or dies on proportion and detail. Because it is opened nightly and carries a lamp's weight on a small top, we match construction to the look — and to the wear a guest room or a retail life demands.
Tapered & angled legs
Solid-wood legs turned to a clean taper and splayed slightly outward, or powder-coated wrought-iron hairpin and angled legs — the raised, floating stance that lets light under the piece and defines the silhouette.
Flush fronts, minimal hardware
Uninterrupted drawer faces with recessed finger-pulls, a shallow scalloped lip, or a slim brass or wood handle — nothing that breaks the clean plane. Drawers run on quality runners inside a solid carcass, not stapled panels.
Warm grain, satin finish
Teak and walnut-tone stains bring out the honeyed grain the era is known for, under a low-sheen satin lacquer or an oiled finish. Rounded front edges and a thin, elegant top complete the retro profile.
Every nightstand carries at least one solid-wood component, so the drawers stay true and the top survives daily use and ocean freight alike — we do not supply plywood-only or panel bedside tables. See the full range of bedside tables on the nightstands hub, or plan a matched bedroom load with our beds and dressers.
One silhouette, several timbers — matched to your sample before we cut a container.
Sheesham & teak
Dense, figured sheesham (Indian rosewood) and teak take a deep walnut-tone stain beautifully — the premium, heirloom-grade build for design-led retail and boutique hotels, CITES-compliant and Vriksh-verified.
Mango & acacia
Warm, open-grain mango and hard, figured acacia are the value workhorses for natural, teak-oiled and two-tone mid-century ranges — ideal where volume and a sharp landed cost matter most.
Wood & iron legs
Pair any carcass with powder-coated iron hairpin or angled legs for a lighter, flat-pack-friendly build that raises container density and lands the industrial-meets-mid-century look online buyers search for.
Indicative specs — every dimension, drawer count and leg profile is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so height, footprint, drawer configuration, leg style, wood and finish are all specified at the quote stage. Lot and heat traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Carcass wood | Sheesham, mango, acacia, teak |
| Legs | Solid-wood tapered / splayed · iron hairpin or angled (powder-coated) |
| Drawers | 1–3 drawers · optional open shelf · dovetail or doweled boxes |
| Pulls | Recessed finger-pull · scalloped lip · slim brass or wood handle |
| Height | Approx. 50–60 cm (to suit mattress height; custom on request) |
| Width | Approx. 40–55 cm |
| Depth | Approx. 35–45 cm |
| Finish | Natural, teak-oiled, walnut-stained, two-tone — CARB / TSCA-compliant satin |
| Assembly | Assembled, part-assembled or knock-down / flat-pack (RTA) |
| Packing | Export carton · ISPM-15 · retail / FBA-ready · matched pairs |
| MOQ | Trial/sample LCL; 1× 20ft FCL for best pricing; mixed-category containers |
| Lead time | 30–45 days typical; urgent orders at premium |
Built for the bedroom, documented for the port.
Made for retail & hospitality
The mid-century nightstand is a staple of design-led bedroom retail, serviced apartments and boutique hotel rooms — pieces that photograph well, pair with almost any bed and reorder season after season. Because a nightstand is opened nightly and wiped down by housekeeping, we build the drawers to run true, QC each lot for a consistent matched look, and finish for the wear your setting demands. See the full range we make for hotels, restaurants and resorts, or produce the look under your own label with our private-label manufacturing.
Import-ready & easy to care for
Kiln-dried, stable timber resists warping and drawer-stick across humid and dry climates. Care is simple — dust with a dry or barely-damp cloth, keep standing water and direct heat off the top, and re-oil oiled finishes occasionally; we supply care guidance you can print onto retail or FBA packaging. On the paperwork side, the wood carcass and the container clear with FSC, Vriksh, EUDR-ready and CARB/TSCA documentation. See our EUDR readiness or every certification we hold.
Mid-century modern nightstands — wholesale & export FAQ
What makes a nightstand mid-century modern?
A mid-century modern nightstand is defined by clean, low-slung geometry on tapered or angled legs that lift the body off the floor, flush or inset drawer fronts, minimal hardware — often recessed finger-pulls, a shallow scallop or a slim brass handle — and a warm, walnut-toned wood grain left visible under a satin finish. We build that look in genuine solid wood, with the splayed-leg stance, rounded front edges and uninterrupted drawer face that read as authentic 1950s–60s design rather than a laminate copy.
Which woods and finishes do you use for mid-century nightstands?
We build mid-century nightstands in solid sheesham (Indian rosewood), mango, acacia and teak, with teak and walnut-tone stains that give the warm, honeyed grain the style is known for. The signature tapered legs can be turned from the same solid wood or supplied as powder-coated wrought-iron hairpin and angled legs for a lighter, flat-pack-friendly build. Finishes are natural, teak-oiled, walnut-stained or two-tone, all CARB / TSCA-compliant.
What is the minimum order for wholesale mid-century nightstands?
A trial or sample order can ship LCL (part-container) so you approve the wood tone, leg style, drawer action and finish before committing. For best wholesale pricing thereafter, one 20ft full container load (FCL) is our standard minimum, and we consolidate mid-century nightstands with matching beds, dressers, console tables and other bedroom pieces into a single mixed container.
Can you supply mid-century nightstands as flat-pack or knockdown?
Yes. The tapered or hairpin legs bolt to a threaded insert in the carcass, so a mid-century nightstand knocks down cleanly into flat-pack (RTA) form. Flat-pack lowers freight cost and transit breakage and maximizes container density — ideal for large importers and online sellers needing Amazon-FBA-ready or retail-ready packaging. We also supply fully assembled for hospitality and premium retail.
Can you make mid-century nightstands to our own design or private label?
Yes. We work as both ODM (our own catalogue designs) and OEM — manufacturing to your drawings, dimensions, drawer count, leg profile, wood and finish, with custom CNC detailing, your branding and retail-ready or gift packaging. Send a reference image or a spec and we prototype to it before any production run so retailers and private-label brands can own an exclusive range.
Are your mid-century nightstands compliant for US and EU import?
Yes. We document FSC chain-of-custody, Vriksh timber-legality and CITES-compliant sheesham handling, with ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA finishes and ISPM-15 export packing. Certificate numbers go to serious buyers directly, never published.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the wood, leg style, drawer count, finish, quantity and market. We confirm the build, MOQ and a FOB/CIF price, produce a sample pair for approval, then manufacture and pack to your standard on a 30–45 day lead time.