Rubberwood dining tables — a sustainable, cost-advantaged hardwood that finishes like premium timber.
Rubberwood is the quiet favourite of high-volume dining programmes: a genuinely dense hardwood with a pale, even grain that stains to read as oak, walnut or teak, at a landed cost below premium rainforest woods. We manufacture solid rubberwood dining tables in Jodhpur — kiln-dried, preservative-treated, FSC and EUDR-ready, finished to your spec and shipped from a single trial order up to repeat container volumes.
Hardwood strength and a blank, paintable canvas — at a price that works for high-volume ranges.
Rubberwood is the timber of the Hevea brasiliensis tree — the same tree tapped for natural latex. After roughly 25 to 30 years the tree stops yielding latex and the mature wood is harvested, kiln-dried and milled into furniture, which makes it a sustainable by-product of an existing plantation crop rather than a cause of deforestation. For a dining table, that eco story is only half the appeal. Rubberwood is a true, dense hardwood with a Janka hardness around 960 lbf — comparable to teak and harder than most pines — so a solid rubberwood top resists the dents and daily loading a dining surface takes. It machines cleanly, carves on CNC and holds mortise-and-tenon joints, dowels and screws tightly, so tables stay square and rigid. And its pale, creamy, mostly straight grain is a finishing advantage: it accepts stain and tint predictably, so one build can ship natural, whitewashed, or stained to read as oak, walnut or warm teak across a whole collection. For importers, online sellers and private-label brands, that uniformity plus a cost-advantaged landed price is exactly what makes rubberwood the smart core wood for a dining range.
What a solid rubberwood dining table gives your range.
| Attribute | Rubberwood dining table characteristic |
|---|---|
| Wood type | Dense plantation hardwood — Hevea brasiliensis; solid throughout top, apron and legs |
| Hardness & durability | Janka hardness around 960 lbf, comparable to teak and harder than most pines; resists dents and daily dining loads once treated and sealed |
| Grain & colour | Pale, creamy blonde with a subtle, mostly straight grain — uniform board to board, so colour is consistent across a run |
| Finishing & stain | Takes stain and tint evenly and predictably; finishes natural, whitewashed, or stained to read as oak, walnut or teak |
| Dimensional stability | Flat and stable indoors when kiln-dried; we season to stable moisture and preservative-treat against fungi and borers before joinery |
| Best setting | Indoor dining — homes, cafés, restaurants, hotel and resort dining; it is an interior timber, not specified for outdoor use |
| Workability | Machines cleanly, carves on CNC, holds joints, dowels and screws — ideal for tops, aprons, legs and knockdown builds |
| Sustainability | Plantation-sourced latex-tree by-product; FSC chain-of-custody on request; EUDR-ready; deforestation-free |
Because rubberwood is a finishing canvas, the stain and sheen you approve matter more than on figured woods, so we recommend signing off a physical top before production. Request a rubberwood dining table sample and we will send grain, stain and size references for your range. For the full species profile, see the rubberwood material guide.
From a four-seater to a ten-seat banquet top — matched to your room.
Standard dining height is 29–30 in (74–76 cm), with 36–40 in (90–100 cm) of width so platters sit comfortably between place settings. Allow roughly 24 in (60 cm) of edge per diner to size the length. Every dimension below is a standard starting point; we build to your exact seating target and footprint for contract and private-label programmes.
| Seats | Top length | Width | Typical use |
|---|---|---|---|
| 4-seater | 48 in · 120 cm | 30–36 in · 76–90 cm | Apartments, cafés, breakfast rooms |
| 6-seater | 60–72 in · 150–180 cm | 36–40 in · 90–100 cm | Family dining rooms, bistro seating |
| 8-seater | 78–96 in · 200–240 cm | 38–42 in · 96–107 cm | Large households, restaurant tables |
| 10-seater / banquet | 108–120 in · 275–305 cm | 40–44 in · 100–112 cm | Hospitality, communal dining, contract |
| Round | 42–54 in · 107–137 cm dia | — | Seats 4–6; compact and conversational rooms |
Build options
Solid rubberwood throughout, or a rubberwood top on a powder-coated iron trestle, pedestal, A-frame, hairpin or turned solid-wood base. Add extension leaves, breadboard ends, matching benches and chairs, and hand-carved or CNC detailing. Finger-jointed and edge-glued tops give wide, stable, cost-efficient surfaces.
Finishes
Natural and whitewashed looks, or stains matched to oak, walnut and warm teak tones, in matt, satin or sealed lacquer for a wipe-clean dining surface — all in CARB / TSCA Title VI formaldehyde-compliant, low-emission formulations. The pale base keeps colour consistent across a whole collection.
Packing & shipping
Assembled, or knockdown (flat-pack / RTA) with bolt-on legs to cut freight and breakage on long tops. Carton, retail-ready, Amazon-FBA-ready or branded packaging, ISPM-15 heat-treated, shipped FOB or CIF from Mundra / Nhava Sheva.
Rubberwood dining tables documented for every market you sell into.
Rubberwood's plantation origin makes it one of the easiest woods to supply sustainably — but modern buyers need the paperwork, not just the claim. Every rubberwood dining table ships with FSC chain-of-custody on request, Vriksh timber-legality verification, and EUDR-ready geolocation and deforestation-free due diligence. We provide US Lacey Act declaration support, UK Timber Regulation coverage, and CARB / TSCA Title VI formaldehyde-compliant finishes, with social and quality assurance under SEDEX / SMETA, ISO and SGS inspection, and ISPM-15 heat-treated export packing. Certificate references go directly to serious buyers — never published.
| Area | Our standard |
|---|---|
| Timber legality | Vriksh verified · documented chain |
| Sustainability | FSC chain-of-custody on request |
| EU market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Social & quality | SEDEX / SMETA · ISO · SGS inspection |
| Export packing | ISPM-15 heat-treated · flat-pack options |
Built for years of indoor dining.
Rubberwood tops, aprons and legs are kiln-dried to stable moisture and preservative-treated against fungi and borers before joinery, with mortise-and-tenon and dowelled joints — and bolt-on bases on knockdown builds — that stay tight under the loading a dining table takes. Rubberwood is an interior timber: it is not naturally weather- or rot-resistant, so it is specified for indoor furniture rather than outdoor use. Day to day, a rubberwood dining table needs only a wipe with a soft cloth, slightly damp for food marks, then dried immediately. Use coasters and mats under hot or wet items, wipe standing liquid promptly, and avoid soaking, harsh solvents and prolonged humidity. A sealed matt or satin lacquer gives a wipe-clean, food-friendly surface for restaurant and family use; keep tables out of direct, prolonged sun to protect the stain tone, and a periodic wax or furniture polish keeps the finish even. Because rubberwood is a dense hardwood, minor marks can be sanded and re-finished rather than replaced. Full care and finish guidance ships with every order so your buyers give consistent advice.
Rubberwood dining table sourcing, answered.
Is rubberwood good for a dining table?
Yes. Rubberwood (Hevea brasiliensis) is a dense, close-grained hardwood with a Janka hardness around 960 lbf — comparable to teak and harder than most pines — so a solid rubberwood top handles the plates, cutlery and daily loading a dining surface takes. It machines cleanly, holds joinery, dowels and screws tightly, and takes stain and lacquer evenly. When it is properly kiln-dried, preservative-treated and sealed, as all of our export rubberwood is, it makes an excellent, cost-advantaged dining table for homes, cafés, restaurants and hotels.
How many people can a rubberwood dining table seat?
It depends on length. As a rule, allow about 24 in (60 cm) of table edge per diner. Our standard rubberwood tops run from a 4-seater at around 48 in (120 cm) long, through 6-seaters at 60–72 in (150–180 cm) and 8-seaters at 78–96 in (200–240 cm), up to 10-seater and bench-dining lengths. Round tops of 42–54 in (107–137 cm) seat four to six comfortably. We build to your exact length, width and seating target for contract and private-label programmes.
Is a rubberwood dining table eco-friendly?
Very. Rubberwood is harvested from plantation trees only after they end their roughly 25–30 year latex-producing life, so the timber is a by-product of an existing crop rather than a reason to clear forest — an inherently plantation-sourced, deforestation-free wood. We supply rubberwood dining tables with FSC chain-of-custody on request and EUDR-ready geolocation and deforestation-free due diligence, which gives your retail, e-commerce and hospitality buyers a genuine sustainability story to put on the label.
Can a rubberwood dining table be stained to look like oak, walnut or teak?
Yes, and that is one of its biggest advantages. Raw rubberwood is a pale, creamy blonde with a subtle, mostly straight grain, so it accepts stains and tints predictably and evenly. We finish it natural or whitewashed, or stain it to read as oak, walnut or a warm teak tone, in matt, satin or sealed lacquer — all in CARB / TSCA Title VI formaldehyde-compliant, low-emission coatings. A solid rubberwood top also pairs well with a powder-coated wrought-iron trestle or hairpin base.
How is a rubberwood dining table different from acacia, mango or sheesham?
All are solid hardwoods we export. Rubberwood is the most cost-advantaged and the most uniform and paintable, with a pale, even base ideal for stained and private-label ranges, and it is an indoor timber. Acacia is harder and more water-resistant with bold figured grain. Mango is lighter and open-grained for high-volume ranges. Sheesham (Indian rosewood) is dense and fine-grained with crisp carving for heirloom and colonial sets. We help you match the wood to your price point and end use.
What is your minimum order for rubberwood dining tables?
A trial or sample order can ship LCL (part-container). For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate rubberwood dining tables with matching dining chairs, benches, sideboards and other categories into a single mixed, compliant container.
Can you make rubberwood dining tables to our own design and brand?
Yes. We work as ODM (our catalogue designs) and OEM (your drawings, dimensions, finishes and private-label or retail-ready packaging), including custom CNC carving, flat-pack / knockdown builds for lower freight and breakage, and rubberwood tops on iron, trestle, pedestal or solid-wood bases.
Sign off the stain and finish, then ship from one container up.
Approve the grain, stain and size on a physical sample, then scale from a trial order to repeat container volumes on a 30–45 day lead time — QC-governed and documented for your market. Read the full species profile on the rubberwood material guide, or compare sizes, seating, builds and other woods on the dining tables hub.