Vintage dining chairs, aged on purpose and built to be reordered.
Reclaimed-wood, industrial and retro solid-wood chairs with a genuine aged patina — distressed, antiqued or over-waxed, engineered flat-pack, and shipped import-ready from a single container up.
Vintage sells because it already looks loved — if the patina is honest and the joinery is new.
Buyers reach for vintage dining chairs when they want instant warmth and character: a seat that looks salvaged from a farmhouse, a café or a mid-century home, without the fragility, odd sizing or supply unreliability of true antiques. The craft challenge is doing it convincingly at volume — a believable aged finish, a retro silhouette that photographs well online, and solid-wood joinery that survives daily dining use and a sea voyage. We build ours on genuine Jodhpur solid-wood credibility, with the hand-finishing, flat-pack engineering and compliance paperwork importers, retailers and hospitality buyers need to reorder the exact same look again.
Reclaimed-wood vintage
Salvaged old timber with real weathering, nail holes and tonal variation — the most authentic and most sustainable vintage look.
Explore reclaimed-wood properties
Mango antique finish
Open-grain mango takes antique glazes, whitewash and distressing beautifully — the mainstream vintage price point.
Explore mango wood properties
Sheesham premium
Indian rosewood for a denser, high-figure chair with a deep hand-rubbed patina — CITES-compliant, ideal for premium ranges.
Explore sheesham wood propertiesEvery vintage silhouette, in one compliant container.
Order a single profile in volume, or mix profiles and finishes across a load — and pair them with a matching reclaimed-wood table from our wider dining-chair collection and dining range for a complete set.
Spindle-back Windsor
The classic country-vintage chair — turned spindles and a scooped seat, aged to look decades old.
Industrial wood & iron
A solid-wood seat on a wrought-iron frame with a gunmetal or rust-antique finish — the factory-vintage look.
Mid-century splat-back
Tapered legs and a curved splat back for a retro 1950s–60s dining-room feel in warm timber.
Bentwood café chair
The bistro / coffee-house silhouette with a woven cane or solid seat and an antiqued frame.
Colonial carver
A heavier armchair with turned detailing to anchor the head of the table and lift set value.
Rush & woven seat
Hand-woven cane or rush on a distressed solid-wood frame for a lighter, lived-in look.
Plank-seat side chair
A scooped solid-wood seat with an aged finish — comfortable without upholstery and simple to clean.
Counter & bar height
Vintage profiles in counter and bar heights to extend the range to kitchen islands and café counters.
Standard vintage dining-chair dimensions and build options.
Indicative guidance for planning covers and container loads. Every dimension, wood and finish is made to order — share your drawings or a reference image for an exact OEM specification.
| Attribute | Typical range / options |
|---|---|
| Seat height | 45–48 cm (18–19 in) dining · 65 cm counter · 75 cm bar |
| Overall height | 85–100 cm to top of back, by profile |
| Seat width / depth | 42–50 cm wide · 40–46 cm deep |
| Profiles | Spindle Windsor · industrial wood & iron · mid-century splat · bentwood café · colonial carver · plank-seat |
| Woods | Reclaimed / old wood · mango · sheesham · acacia · teak |
| Frame / legs | All-wood · or solid-wood seat on wrought-iron base |
| Seat type | Solid scooped wood · hand-woven cane / rush · upholstered seat pad (optional) |
| Finishes | Distressed / antique · whitewash · over-wax · hand-rubbed stain · gunmetal / rust-antique iron · lacquer (CARB / TSCA-compliant) |
| Assembly | Fully assembled or knockdown / flat-pack (RTA) legs & stretchers |
| Customisation | ODM catalogue designs · OEM to your drawings · private label |
Dimensions are indicative for export planning; confirmed specs are issued per order. Reclaimed-wood pieces carry natural tonal and grain variation by design. Flat-packing most profiles raises the piece count per 20ft / 40ft container.
An aged look that holds up to real dining use.
A vintage chair has to earn its character twice — once in the finish and once in the frame. We reinforce the seat-to-leg joints with corner blocks and through-tenons, specify commercial-grade sealed finishes and heavy-traffic seat construction for hospitality and contract projects, and build the patina by hand so the wear reads natural rather than painted-on. The same chair then works for a home-retail assortment and a restaurant, café, bar or boutique-hotel fit-out. Builds and finishes are held consistent across an entire project, and samples are produced before the production run so your designer signs off on the exact patina and on comfort first. The silhouette suits vintage, retro, industrial, farmhouse, eclectic and transitional ranges across retail, e-commerce and contract.
Finish & care
Vintage chairs ship with a buyer care note: wipe with a dry or barely-damp cloth, avoid standing water and direct heat, and re-wax or re-oil hand-finished pieces periodically to keep the patina alive. Distressed and over-waxed finishes are sealed for wipe-clean durability, and the aging is intentional — light inconsistency is part of the look, not a defect. Knockdown fixings should be checked and re-tightened after the first few weeks of use, and we supply replacement hardware and finish details on request to support your own warranty terms. On wood-and-iron frames the metalwork is sealed against surface rust; woven cane or rush seats benefit from occasional ambient humidity to stay taut.
Import-ready paperwork on every vintage chair.
We document FSC chain-of-custody, Vriksh timber-legality and CITES-compliant sheesham handling, and we build our due diligence around the EU Deforestation Regulation — geolocated and deforestation-free, with reclaimed wood strengthening the story — so your container clears while others' wait. US Lacey Act support, UK Timber Regulation, CARB / TSCA finishes and ISPM-15 packing are covered as standard.
| Term | Detail |
|---|---|
| Minimum order | Trial / sample LCL · then 1× 20ft FCL for best pricing |
| Lead time | 30–45 days typical · urgent at premium |
| Incoterms | FOB / CIF · ex Mundra / Nhava Sheva |
| Consolidation | Mixed with reclaimed-wood tables, benches & other furniture |
| Packing | ISPM-15 heat-treated · flat-pack to maximise density |
| Design | ODM catalogue · OEM to drawings · private label |
What importers and hospitality buyers ask us.
What makes a dining chair a vintage style?
A vintage dining chair recreates the look of a decades-old, well-loved piece: an aged or distressed finish with visible patina, a retro silhouette such as a spindle-back Windsor, mid-century splat-back, bentwood café or wood-and-iron industrial profile, and honest solid-wood construction with exposed joinery. We build these as new, durable reproductions — the character of a genuine antique with the strength and consistency a container order needs.
Which wood is best for vintage dining chairs?
Reclaimed / old wood is the most authentic choice because its natural weathering, nail holes and tonal variation give a true salvaged look, and it is the most sustainable option. Mango and sheesham (Indian rosewood) are also excellent: mango takes antique, whitewash and distressed finishes beautifully at a mainstream price point, while sheesham gives a denser, deeper-grained premium chair. We match the wood to your finish, price point and target market.
How do you create the aged vintage finish?
The patina is built by hand in layers — distressing, physical wear on edges and seats, antique glazes and over-wax or hand-rubbed stains — then sealed for wipe-clean durability. On reclaimed-wood frames the finish works with the timber's own weathering. All finishes are CARB / TSCA formaldehyde-compliant, and we hold the exact recipe consistent across a production run so every chair in your container matches.
Can vintage dining chairs ship flat-pack to cut freight?
Yes. Most vintage profiles are engineered as knockdown / flat-pack (RTA) with bolt-together legs and stretchers, which lowers freight cost and transit breakage and lifts the piece count per container — ideal for large importers and online sellers. Fully assembled builds are also available where the silhouette requires it.
What is the minimum order for vintage dining chairs?
A trial or sample set can ship LCL (part-container) so you approve the wood, patina finish and comfort first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and the chairs can be consolidated with matching reclaimed-wood dining tables and benches in a single container.
Are your vintage dining chairs compliant for import into the US and EU?
Yes. We document FSC chain-of-custody, Vriksh timber-legality and CITES-compliant sheesham handling, and we are EUDR-ready with geolocation and deforestation-free due diligence — reclaimed wood supports a strong deforestation-free story. We support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA formaldehyde-compliant finishes and ISPM-15 heat-treated export packing.
Send your reference or shortlist ours — we'll quote FOB/CIF with MOQs and lead times.
Request a sample set to approve the wood, patina and comfort before you commit to a container, or download the catalogue to brief your buying team.