Acacia wood dining chairs — dense, figured hardwood built for everyday dining and busy restaurants.
Acacia is one of the hardest, most water-resistant woods we work, with bold multi-tone grain that reads as premium across a retail dining set or a hotel restaurant floor. We manufacture acacia side and arm chairs in Jodhpur, document them for import, and ship from a single trial order up to repeat container volumes.
The seat that survives the table where life actually happens.
A dining chair is pulled out, leaned back on, dragged across floors and wiped down after every meal — in a restaurant, dozens of times a day. Acacia answers all of it. It is a genuinely hard tropical hardwood with a high Janka rating, so seats, legs and back rails resist the dents and scuffs of constant use. Its natural oils give it real water and stain resistance, so a spilt glass or a damp cloth does no harm. And its flowing, multi-tone grain — honey and amber through to deep walnut-brown — makes every chair look individually crafted rather than mass-produced, so a set of eight still feels bespoke. Because acacia is fast-growing and frequently plantation-sourced, it is also one of the more sustainable solid woods you can put your name behind.
How acacia performs where softer chairs loosen and dent.
| Attribute | Acacia dining chair characteristic |
|---|---|
| Wood type | Dense tropical hardwood — solid throughout seat, legs, rails and back |
| Hardness | High Janka hardness; strongly resists the dents and scratches of daily dining |
| Water & stain resistance | Naturally high from density plus natural oils — shrugs off spills and wipe-downs |
| Grain & colour | Bold, often wavy figure in warm multi-tone; every chair is unique and deepens with oil |
| Structural strength | Mortise-and-tenon and dowelled joinery, kiln-dried for a stable, wobble-free frame |
| Workability | Takes CNC detailing, turning and smooth sanding; finishes oiled, waxed or lacquered |
| Sustainability | Fast-growing, frequently plantation-grown; FSC chain-of-custody available on request |
| Best settings | Residential dining, restaurants, cafés, hotel dining rooms, bistros, event seating |
Figure, colour and exact hardness vary by acacia board, which is why we recommend approving a physical chair before production. Request an acacia dining chair sample and we will send grain, finish and comfort references for your range.
Measured to sit right under the table it serves.
Comfort comes from the gap between seat and table: aim for roughly 10–12 in (25–30 cm) between the seat top and the underside of the table apron, so diners clear their thighs and tuck in cleanly. Every dimension below is a standard starting point — we build acacia chairs to your exact seat height, depth and back angle for contract projects.
| Dimension | Standard range | Notes |
|---|---|---|
| Seat height | 18–19 in · 46–48 cm | Suits 28–30 in (71–76 cm) dining tables |
| Seat width | 17–20 in · 43–51 cm | Side chairs narrower; carvers wider for armrests |
| Seat depth | 16–18 in · 41–46 cm | Supports the thigh without pressing the knee |
| Overall back height | 34–39 in · 86–99 cm | Slat, ladder, cross-back or solid-panel backs |
| Arm height (carvers) | 25–27 in · 64–69 cm | Clears a standard apron for tuck-under |
Styles & builds
Armless side chairs and arm or carver chairs; slat, ladder, cross-back, Windsor-spindle or solid-panel backs; plain timber, upholstered or woven-cane seats. Solid acacia throughout, or an acacia frame on a powder-coated wrought-iron base for the industrial look. Stackable frames available for high-density venues.
Finishes
Natural oil for a matte feel, wax, or sealed wipe-clean lacquer; honey, dark walnut and distressed stains that play to acacia's figure — all in CARB / TSCA Title VI formaldehyde-compliant formulations for the US and EU. Upholstery in your fabric or leather, COM accepted.
Packing & shipping
Assembled or knockdown (flat-pack / RTA) to cut freight and breakage, with carton, retail-ready, Amazon-FBA-ready or branded packaging. ISPM-15 heat-treated export packing, shipped FOB or CIF from Mundra / Nhava Sheva.
One chair, sold the way you sell.
Retail & online sellers
Matched sets of four, six or eight with consistent grain selection and colour, in flat-pack, retail-ready or Amazon-FBA-ready cartons that protect the chair and carry your brand.
Hospitality & contract
Restaurant, café and hotel dining chairs built for commercial loading — reinforced joinery, stackable options and sealed wipe-clean finishes, made to your exact seat height and fabric.
Private label & designers
Produce your own range as OEM — your drawings, dimensions, finishes and label — or specify bespoke pieces and small runs in acacia to complete a project to spec.
Dining chairs that clear customs as cleanly as they sit.
Every acacia dining chair ships with the documentation serious importers need: FSC chain-of-custody on request, Vriksh timber-legality verification, and EUDR-ready geolocation and deforestation-free due diligence. We provide US Lacey Act declaration support, UK Timber Regulation coverage, and CARB / TSCA formaldehyde-compliant finishes, with social and quality assurance under SEDEX / SMETA, ISO and SGS inspection, and ISPM-15 heat-treated export packing. Acacia's fast growth and plantation sourcing make it one of the easier woods to supply sustainably — we give you the paperwork, not just the claim.
| Area | Our standard |
|---|---|
| Timber legality | Vriksh verified · documented chain |
| Sustainability | FSC chain-of-custody on request |
| EU market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Social & quality | SEDEX / SMETA · ISO · SGS inspection |
| Export packing | ISPM-15 heat-treated · flat-pack options |
Finished to your brief, built to take years of service.
Acacia seats and frames are kiln-dried to stable moisture levels before joinery, so they hold firm under the repeated pull-out, lean-back loading a dining table demands and resist the loosening that plagues softer-wood chairs. Clean with a soft, slightly damp cloth and refresh oiled surfaces with furniture oil or wax; avoid soaking, harsh solvents and prolonged direct heat or sun, and lift rather than drag chairs to protect both the joints and your floors. Re-oil or re-wax oiled chairs once or twice a year to feed the grain and keep the colour deep. Wrought-iron bases are powder-coated against scuffing, and upholstered seats can be specified with wipe-clean or contract-grade covers for high-wear venues. Full care and finish guidance ships with every order so your retail and hospitality customers get consistent advice.
Acacia dining chair sourcing, answered.
Are acacia wood dining chairs durable enough for restaurants and cafés?
Yes. Acacia is one of the hardest, most water-resistant furniture hardwoods, with a high Janka hardness and natural oils that resist dents, scratches and spills. Solid-acacia seats and mortise-and-tenon joinery handle the daily pull-out, lean-back and wipe-down cycle of restaurant, café and hotel dining, which is why acacia is a common choice for contract seating.
What is the standard seat height for an acacia dining chair?
Our standard dining-chair seat height is roughly 18–19 in (46–48 cm), which suits the usual 28–30 in (71–76 cm) dining table and leaves comfortable thigh and knee clearance. We also manufacture to your exact seat height, depth and back angle for contract and hospitality projects.
Do you make acacia dining chairs with arms, upholstery or stackable frames?
Yes. We build armless side chairs and arm or carver chairs, plain timber or upholstered seats in your fabric or leather, and stackable frames for high-density restaurant and banquet use. Back styles include slat, ladder, cross-back and solid-panel, in solid acacia or an acacia frame paired with woven cane or a powder-coated wrought-iron base.
Is acacia a good sustainable wood for dining chairs?
Acacia is fast-growing and frequently plantation-sourced, which makes it one of the more sustainable solid hardwoods for furniture. We supply it with FSC chain-of-custody on request, Vriksh timber-legality verification and EUDR-ready, deforestation-free due diligence, so you can stand behind the sustainability claim on your range.
What is your minimum order for acacia dining chairs?
A trial or sample order can ship LCL (part-container). For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate acacia dining chairs with matching tables, benches, décor and other categories into a single mixed container.
How do you care for acacia dining chairs?
Wipe spills promptly, dust with a soft dry cloth, and keep chairs away from standing water, harsh solvents and prolonged direct heat or sun. Re-oil or re-wax oiled chairs once or twice a year to feed the grain and keep the colour deep. Full care and finish specifications ship with every order.
Sample the wood and comfort, then ship from one container up.
Approve the grain, finish and seat comfort on a physical sample, then scale from a trial order to repeat container volumes on a 30–45 day lead time — QC-governed and documented for your market. Compare the wood against our other species on the acacia wood material guide, see every back style and build on the dining chairs hub, or pair them with matching solid-wood dining tables.