Wrought iron daybeds — hand-forged, powder-coated frames that double as sofa and bed.
A daybed takes more abuse than almost any piece on the floor — sat on, lounged across, slept on, pushed against walls. Wrought iron is the one frame that shrugs it off: fully welded, rigid, silent, and finished in a baked powder-coat that never chips loose. We hand-forge platform, scrolled, industrial and canopy daybeds in Jodhpur — with trundle options and your choice of finish — from a single trial order up to repeat container volumes.
The frame built for sit-lie-sit, all day, for years.
A daybed lives a double life — seating by day, a bed by night — and that constant change of load is exactly what loosens a timber joint over time. A wrought iron daybed sidesteps the problem entirely. The frame is hand-forged solid bar and tube, fully welded, so its junctions are permanent and it stays square and silent under thousands of sit-and-recline cycles. That is why iron daybeds are a mainstay of hotel lobbies, reading nooks, spa lounges, verandas and hard-use rentals, where a sofa-bed hybrid has to survive genuine daily traffic. Jodhpur's metalworking tradition runs deep, and our forgers shape iron into everything from slim modern platforms to scrolled traditional backs, industrial flat-bar frames and tall canopy designs for drapes. Many buyers pair the iron frame with a solid-wood slat base or trundle platform for warmth and a mixed-material look. A baked-on powder-coat seals the steel against rust and scuffing in any colour from matte black to antique bronze or white — and because the whole frame breaks down flat, it is one of the most freight-efficient daybeds you can ship.
What hand-forged iron brings to a daybed.
| Attribute | Wrought iron daybed characteristic |
|---|---|
| Material | Hand-forged solid iron bar and tube — fully welded frame |
| Strength / rigidity | Very high — welded junctions never loosen; silent through sit-lie-sit cycles |
| Corrosion resistance | Cleaned, primed and powder-coated; zinc-rich anti-corrosion build for veranda, poolside and coastal use |
| Styles | Modern platform, scrolled traditional, industrial flat-bar, canopy — single-back or sofa-style three-sided |
| Finish | Baked powder-coat — matte black, antique bronze, white or custom colour; chip-resistant |
| Trundle / storage | Welded steel trundle on castors, or solid-wood drawer / slide-out base |
| Mattress support | Welded steel mesh or slat system to preference |
| Best setting | Lobbies, reading rooms, spas, verandas, guest rooms, boho / industrial / farmhouse interiors |
| Freight | Knocks down flat and nests — very high container density |
We can match a powder-coat colour, scroll detail and trundle format to your range. Request a sample for finish and forging references, or see our full metalware capability in the wrought iron material guide.
Every market size, forged and coated to your spec.
We manufacture to US, UK and EU mattress standards, with back height, scroll detail, canopy height and trundle format made to order. The dimensions below are standard starting points — give us your market's mattress size and we forge the frame to fit.
| Format | Mattress (in) | Mattress (cm) | Notes |
|---|---|---|---|
| Twin / Single | 38 × 75 | 90 × 190/200 | Core daybed size — lobbies, guest rooms, reading nooks |
| Narrow single | 36 × 75 | 90 × 190 | Slim profile for compact rooms and verandas |
| Single + trundle | 38 × 75 (×2) | 90 × 190/200 (×2) | Roll-out second bed on castors — sleeps two |
| Full / Double | 54 × 75 | 140 × 190/200 | Generous lounge / spare-room daybed, built to order |
Build options
Slim modern platform, scrolled head-and-back, industrial flat-bar, and canopy frames; single-back or three-sided sofa-style. All-iron construction, or an iron frame with a solid-wood slat base, back panel or trundle platform for a mixed look. Welded steel trundle on castors, or drawer / slide-out storage base.
Finishes
Baked powder-coat in matte black, antique bronze, pewter, white or custom colour; distressed and hand-aged options available. Tough, chip-resistant and colour-stable; heavier zinc-rich anti-corrosion priming under a UV-stable coat for veranda, poolside, humid and coastal markets.
Packing & shipping
Knockdown by design — back, sides, base rails, trundle and canopy nest flat with bolt-through connectors for very high container density and low breakage. Carton, retail-ready, Amazon-FBA-ready or branded packaging; ISPM-15 heat-treated export packing where timber is used, FOB or CIF from Mundra / Nhava Sheva.
Metalware made to an audited, documented standard.
An iron daybed sits outside timber regulation, but it still has to meet the quality, safety and ethical-sourcing standards your markets demand — and we document all of them. Our metalworking is covered by ISO quality management, SGS third-party inspection, and SEDEX / SMETA ethical and social audit, so your compliance team sees a verified supply chain. Powder-coat finishes are selected to meet relevant chemical-compliance requirements, and any solid-wood slat base, back panel or trundle platform is covered by FSC chain-of-custody, Vriksh timber-legality and EUDR-ready documentation on request, with US Lacey Act and UK Timber Regulation support. Export packing is ISPM-15 heat-treated wherever timber packaging is used. Certificate references go directly to serious buyers — never published.
| Area | Our standard |
|---|---|
| Quality | ISO quality management · documented |
| Inspection | SGS third-party inspection |
| Social & ethical | SEDEX / SMETA audited |
| Finish | Powder-coat · chemical-compliant selection |
| Wood components | FSC · Vriksh · EUDR-ready · Lacey · UKTR on request |
| Export packing | ISPM-15 heat-treated where timber used |
Forged to outlast the room it furnishes.
A wrought iron daybed is about as low-maintenance as a lounge piece gets. The welded frame cannot loosen, and the baked powder-coat shrugs off scuffs and keeps its colour, so routine care is nothing more than a wipe with a soft, dry or slightly damp cloth. Avoid abrasive pads and harsh solvents that could mar the coating, and on verandas or near a pool keep the frame dry between uses and specify our heavier zinc-rich anti-corrosion build at order stage. Bolt-through connectors let the daybed be dismantled and reassembled across house moves and reconfigurations without weakening, and any small coating chip can be touched in with matched paint rather than refinished. Welded steel-mesh or slat supports carry the mattress evenly, and trundle castors run smoothly with an occasional clean. Full care and finish guidance ships with every order so your retail and hospitality customers get consistent advice.
Wrought iron daybed sourcing, answered.
What makes a wrought iron daybed good for hospitality and high-traffic rooms?
A wrought iron daybed earns its keep where furniture gets used hard. The frame is fully welded hand-forged iron, so it never loosens, swells or creaks the way a timber joint can, and it carries a sitter-then-sleeper load all day without flexing. That rigidity, plus a chip-resistant baked powder-coat finish, is why iron daybeds suit hotel lobbies, reading rooms, verandas, spa lounges and rental properties — they take years of daily sit-lie-sit use and still look square and tight.
Will a wrought iron daybed rust on a veranda or by the pool?
Not with the right finish, which we specify to the setting. Every frame is cleaned or shot-blasted, primed and powder-coated — a baked-on finish far tougher than wet paint. For indoor and covered use that is enough; for verandas, conservatories, poolside and coastal markets we add a zinc-rich anti-corrosion primer under a UV-stable coat so the metal resists rust and colour fade. Tell us where the daybed will stand and we match the finish build to it.
What styles and sizes of wrought iron daybed do you export?
We hand-forge slim modern platform daybeds, scrolled and traditional heads and backs, industrial flat-bar frames, and canopy daybeds for drapes. Standard frames suit a US twin/single mattress at about 38 x 75 in (90 x 190/200 cm), with trundle pull-outs sized to match; full/double and bespoke sizes are built to order. Head- and back-height, scroll detail, canopy height and finish colour are all made to your specification.
Can a wrought iron daybed include a trundle or storage?
Yes. We build welded steel trundle frames on castors that roll out from under the main daybed to give a second sleeping surface — a popular format for guest rooms and compact rentals. Where buyers want storage instead, we can pair the iron frame with a solid-wood drawer base or slide-out platform. Mattress support is a welded steel mesh or a slat system to your preference.
Do wrought iron daybeds ship flat-packed to save freight?
Yes, and they are among the most freight-efficient daybeds we make. The back, sides, base rails and any trundle or canopy separate and nest flat, with bolt-through connectors for fast assembly, which cuts container volume and transit damage sharply. Iron is dense, so we engineer the pack carefully and quote FOB or CIF from Mundra or Nhava Sheva. We supply carton, retail-ready and Amazon-FBA-ready packaging.
What is your minimum order for wrought iron daybeds?
A trial or sample daybed can ship LCL (part-container) so you can approve the forging, finish and build before committing. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum — and because iron daybeds knock down flat, a container holds a high unit count. We consolidate them with wood furniture, metalware and décor into mixed containers.
Approve the finish, then ship from one container up.
Sign off a powder-coat colour, scroll detail and trundle format on a physical sample, then scale from a trial order to repeat container volumes on a 30–45 day lead time — QC-governed and documented for your market. Compare woods and materials on the daybeds hub, or see our full metalware capability in the wrought iron material guide.