Industrial coat racks — solid wood on wrought iron, built for export.
Reclaimed and solid-wood rails and coat trees on powder-coated wrought-iron and pipe-fitting frames — the loft-and-café look importers, retailers and hospitality buyers keep asking for. Manufacturer-direct, compliance-documented, and shipped flat-pack to fill the container.
Honest wood, exposed iron — the entryway piece that anchors a loft, a café or an office.
The industrial coat rack is a mixed-material build: a solid-wood rail, plate or standing column carried on, or fitted with, wrought iron — flat bar, square or round tube, or threaded pipe-fitting hardware — with visible bolts, cast hooks and an unfussy, workshop-honest line. It is the entryway piece buyers reach for to finish a reclaimed-and-steel scheme: a brewery coat wall, a loft hallway, a boutique-hotel lobby, a home office. We make it as a genuine solid-wood product on welded or assembled metal, not a particleboard shell, so it carries real coat weight, survives commercial use and reads as craft on the shelf.
Solid wood for warmth and wear. Wrought iron for strength and line.
The wood body
Rails, back-plates and standing columns are cut from solid reclaimed / old wood, sheesham (Indian rosewood), mango or acacia — dense hardwoods that take daily knocks, hold a finish and bring real grain to an otherwise hard, metallic piece. Reclaimed wood is the signature industrial choice: visible history, saw marks and colour variation, with a deforestation-free, FSC-aligned sustainability story your buyers can sell.
The iron frame & hooks
Frames and hooks are hand-worked from wrought iron — flat bar, tube or threaded pipe fittings — then de-scaled, primed and powder-coated for a hard, even, rust-resistant surface. Cast-iron or brass hooks carry the outerwear load, and because the metal bolts to the wood, the rack stays rigid in commercial use yet breaks down for dense, low-breakage shipping.
Indicative specs — every dimension, finish and frame profile is made to your order.
Figures below are typical reference ranges. We manufacture to your exact drawings and market requirements, so hook count, height, iron gauge, wood species and finish are all specified at the quote stage. Lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Formats | Freestanding coat tree · wall-mounted rail / plate · hall tree with iron frame |
| Wood body | Reclaimed / old wood, sheesham, mango or acacia |
| Metal & hardware | Hand-welded wrought iron — flat bar, tube or pipe fittings; cast-iron or brass hooks |
| Iron finish | Powder-coat (matt black), raw sealed, antique bronze, gunmetal, distressed |
| Wood finish | Natural oil, stained, walnut, honey, distressed — matt / satin, CARB / TSCA-compliant |
| Freestanding height | Approx. 170–185 cm · ~45–60 cm footprint (custom on request) |
| Wall rail length | Approx. 45 / 60 / 90 cm · 3–6 hooks typical |
| Assembly | Knock-down / flat-pack (RTA), part-assembled or assembled |
| Packing | Export carton · ISPM-15 heat-treated · retail / FBA-ready on request |
One entryway piece, every space with an industrial edge.
Cafés, bars & breweries
Steel-and-wood coat walls and freestanding trees built and QC-checked for commercial wear — the backbone of the industrial-hospitality entryway. Entryway furniture for hospitality & contract.
Lofts, lobbies & retail floors
A finishing piece for exposed-brick apartments, hotel lobbies and boutique corners — compact, high-margin and easy to merchandise beside mirrors and benches.
Offices & home workspaces
The honest-material rack that pairs with a reclaimed-wood desk and holds up to daily coat traffic in co-working and home-office settings.
Built to ship flat.
Because the iron frame bolts to the wood, the freestanding and hall-tree industrial coat rack is a natural knock-down (RTA) product — stacking more units per container, cutting breakage in transit and lowering landed cost for large importers and online sellers. Wall-mounted pipe-and-wood racks ship compact already, with fittings and clear assembly guidance included and brandable for retail and FBA channels.
Keeps selling for years.
Solid wood moves with climate; a stable indoor environment and a soft dry or lightly damp wipe keep the body sound, while occasional wood oil or wax protects the finish — avoid soaking the timber. The powder-coated iron frame needs only a dry wipe; a raw or distressed finish can be given a light oil to hold its patina. Wall racks ship with guidance to fix into studs or rated anchors for outerwear loads. We finish wood with CARB / TSCA-compliant lacquers and share care guidance with every order.
Paperwork your customs broker will thank you for.
Our wood-and-iron coat racks ship with FSC chain-of-custody, Vriksh timber-legality and CITES-compliant handling of sheesham, backed by ISO, SGS and SEDEX / SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB / TSCA finishes and ISPM-15 export packing — so your entryway load clears the port instead of sitting in it.
| Requirement | Our standard |
|---|---|
| Timber legality | Vriksh verified · CITES-compliant sheesham |
| Sustainability | FSC chain-of-custody · reclaimed-wood lines |
| EU market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Social audit | SEDEX / SMETA · ISO · SGS inspection |
| Export packing | ISPM-15 heat-treated · flat-pack options |
Industrial coat racks — wholesale & export FAQ
What is an industrial coat rack made of?
An industrial coat rack pairs a solid-wood element — reclaimed/old wood, sheesham, mango or acacia — with a frame or rail of wrought iron, often styled as exposed pipe fittings, flat bar or tubular steel with visible bolts and cast hooks. Every rack carries at least one solid-wood component; we are not a plywood or panel supplier.
Do industrial coat racks ship flat-pack to save on freight?
Yes. Because the iron frame bolts to the wood, freestanding and hall-tree industrial racks ship knock-down / flat-pack (RTA) — the biggest lever for container density, lower breakage and cheaper landed cost. Wall-mounted pipe-and-wood racks ship compact by design. Assembled and part-assembled builds are available too.
What finishes are available on the iron and the wood?
Iron is powder-coated (matt black is the volume seller), raw sealed, antique bronze, gunmetal or distressed; hooks are cast iron or brass. Wood is natural oil, stained, dark walnut, honey or distressed, in matt or satin lacquer. All wood finishes are CARB / TSCA formaldehyde-compliant. Finish, wood species and frame profile are confirmed at the quote stage.
Are industrial coat racks strong enough for café and office use?
Yes. The steel frame and solid-wood body make the industrial coat rack a natural contract piece for cafés, breweries, lofts, offices and hotel entryways. We QC-check every piece, specify iron gauge to your load needs, and can reinforce joints and hardware for commercial duty cycles.
What is the minimum order and lead time for industrial coat racks?
A trial or sample order can ship LCL so you approve wood, finish and hardware first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and racks consolidate well into mixed containers. Typical production is 30–45 days after sample approval; urgent orders at a premium.
Can you make industrial coat racks to our own design or private label?
Yes — we work as both ODM (our catalogue designs) and OEM, manufacturing to your drawings, hook count, height, frame profile, finish and private-label branding, with retail-ready or Amazon-FBA-ready packaging. Send a reference image or spec and we prototype to it.
Send a reference or your catalogue — we'll quote, sample and ship.
Tell us the format, wood, hook count, quantity and market. We confirm species, iron finish, MOQ and a FOB / CIF price from Mundra / Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.