Rubberwood bathroom vanities — eco plantation hardwood, sealed for the bath.
Rubberwood gives buyers a smooth, paintable solid-wood vanity at an entry price point, with a genuine plantation-by-product eco story. We manufacture them in Jodhpur: boron-treated, kiln-dried, fully sealed for the bathroom, legally sourced and EUDR-ready, and shipped from a single trial order up to high-volume repeat containers.
Real solid wood at an entry price, with a plantation eco story.
Rubberwood (Hevea brasiliensis) is the timber of the rubber tree — grown for latex, then harvested for wood only once its tapping life is over. That makes it a true by-product: abundant, renewable and low-cost, with no demand placed on natural forest, and a sustainability narrative that resonates with eco-minded buyers. As a timber it is a medium-density hardwood with a pale cream-to-light-blonde colour and a fine, straight, even grain that carries almost no strong figure. That blank, uniform surface is its second advantage — it takes paint, stain, two-tone and lacquer finishes evenly and predictably, which is why so much mass-market painted and colour-matched furniture is built from it. The one rule is treatment: raw rubberwood is prone to fungal staining and borer if left untreated, so performance depends entirely on correct boron treatment, kiln-drying and sealing. Built that way, it gives retailers a smooth, reliable, great-value solid-wood vanity for high-volume programmes.
What rubberwood brings to a bathroom vanity.
| Attribute | Rubberwood vanity characteristic |
|---|---|
| Wood type | Medium-density plantation hardwood (Hevea brasiliensis) — solid carcase, doors and frame |
| Grain & colour | Pale cream to light blonde; fine, straight, even grain with little strong figure — ideal for paint |
| Finish behaviour | Takes paint, stain, two-tone and lacquer evenly and predictably — perfect for colour-matched ranges |
| Treatment (critical) | Boron-treated against fungus and borer, kiln-dried to a stable moisture content before build |
| Moisture handling | Water-resistant lacquer over sealed top, cut-outs, end-grain and undersides; ventilation advised |
| Value | Entry price point — among the best value-for-money solid hardwoods for high-volume programmes |
| Sustainability | Plantation by-product, renewable; FSC chain-of-custody and Vriksh on request; EUDR-ready |
| Best settings | Residential and budget-hotel bathrooms with normal ventilation; painted and colour ranges |
Rubberwood's blank surface is a strength for colour matching — we recommend approving a painted or lacquered finish sample before production. Request a rubberwood vanity sample and we will send colour and finish references. For the full species profile, see the rubberwood material guide.
Single, double, wall-hung or freestanding — matched to your basin.
Every dimension below is a standard starting point. We build rubberwood vanities to your exact width, height and basin cut-out for retail and contract programmes, pre-bored to your plumbing standard.
| Type | Width | Depth | Height |
|---|---|---|---|
| Compact / cloakroom | 24 in · 60 cm | 18 in · 46 cm | 32–34 in · 81–86 cm |
| Single vanity | 30–36 in · 76–91 cm | 20 in · 50 cm | 32–34 in · 81–86 cm |
| Wide single | 48 in · 122 cm | 21 in · 53 cm | 34–36 in · 86–91 cm |
| Double vanity | 60–72 in · 152–183 cm | 21–22 in · 53–56 cm | 34–36 in · 86–91 cm |
Build options
Freestanding, floor-standing or wall-hung; drawers on soft-close runners, or shaker, fluted, reeded and plain doors. Solid rubberwood throughout, or a rubberwood body on a powder-coated iron frame for an industrial look — ideal for painted ranges.
Tops & finishes
Painted, colour-matched, two-tone, stained or natural finishes in CARB / TSCA Title VI formaldehyde-compliant lacquers — rubberwood's even grain gives a flawless painted surface. Sealed rubberwood, stone or lacquered tops cut for vessel, drop-in or under-mount basins.
Packing & shipping
Assembled or knockdown (flat-pack / RTA) to cut freight and breakage, with carton, retail-ready, Amazon-FBA-ready or branded packaging. ISPM-15 heat-treated export packing, shipped FOB or CIF from Mundra / Nhava Sheva.
Great value, fully documented for your market.
Rubberwood is a legal plantation species with a strong sustainability profile, and we back it with the records your customs and compliance teams expect. Every rubberwood vanity ships with FSC chain-of-custody on request, Vriksh timber-legality verification, and EUDR-ready geolocation and deforestation-free due diligence. We provide US Lacey Act declaration support, UK Timber Regulation coverage, and CARB / TSCA Title VI formaldehyde-compliant finishes — important for an enclosed bathroom — with social and quality assurance under SEDEX / SMETA, ISO and SGS inspection, and ISPM-15 heat-treated export packing. Certificate references go directly to serious buyers, never published.
| Area | Our standard |
|---|---|
| Timber legality | Vriksh verified · documented chain |
| Sustainability | Plantation by-product · FSC on request |
| EU market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Social & quality | SEDEX / SMETA · ISO · SGS inspection |
| Export packing | ISPM-15 heat-treated · flat-pack options |
Treated right, it earns its place in the bathroom.
Rubberwood rewards a careful build, and that is where we focus. Every unit is boron-treated against fungus and borer before anything else, kiln-dried to a stable moisture content so doors and drawers stay true, and then fully sealed — top, basin and tap cut-outs, end-grain and undersides — with a water-resistant lacquer so bathroom moisture never reaches raw timber. Those three steps are what turn an inexpensive wood into a reliable vanity. For end-users the care is simple: wipe spills and standing water promptly, clean with a soft damp cloth and a mild pH-neutral cleaner, and avoid bleach and abrasive pads that attack any lacquer. A working extractor fan or window keeps ambient humidity down and protects every solid-wood vanity. For splash-heavy or commercial washrooms we recommend a stone or lacquered top over the rubberwood base. Full care and finish guidance ships with every order so your retail and contract customers get consistent advice.
Rubberwood vanity sourcing, answered.
Is rubberwood good for a bathroom vanity?
Rubberwood is a dense, even-grained hardwood that works well as a bathroom vanity once it is correctly kiln-dried, treated and sealed — which is non-negotiable in our build, because raw rubberwood is prone to fungal staining and moisture if left untreated. We boron-treat, kiln-dry and fully seal every unit, including cut-outs and undersides. For a well-ventilated bathroom it delivers a smooth, paintable, great-value solid-wood vanity.
Why is rubberwood such good value?
Rubberwood (Hevea brasiliensis) is a plantation by-product: the tree is grown for latex, and its timber is harvested only when latex yield ends, so the wood is abundant, renewable and low-cost without touching natural forest. That makes it one of the best value-for-money hardwoods available — a genuine eco story and an entry price point that lets retailers hit competitive shelf prices while still selling real solid wood.
Does rubberwood take paint and colour finishes well?
Exceptionally well. Rubberwood has a pale, uniform cream-to-light-blonde colour and a fine, straight, even grain with almost no strong figure, so it accepts paint, stain, two-tone and lacquer finishes evenly and predictably — ideal for brands that sell painted, colour-matched or on-trend vanity ranges. We finish in CARB / TSCA Title VI formaldehyde-compliant formulations suitable for enclosed bathrooms.
How do you stop rubberwood warping or staining in a bathroom?
Three steps. We boron-treat the timber against fungus and borer, kiln-dry it to a stable moisture content so it does not move, and seal the entire unit with a water-resistant lacquer — top, basin and tap cut-outs, end-grain and undersides. We also advise an extractor fan or window and a stone or lacquered top for splash-heavy installs. Treated and sealed this way, rubberwood is stable and reliable indoors.
What is your minimum order for rubberwood bathroom vanities?
A trial or sample order can ship LCL (part-container). For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate rubberwood vanities with mirrors, open shelves, bath stools and other categories into a single mixed container — rubberwood's value makes it ideal for high-volume programmes.
Can you make rubberwood vanities to our own design and brand?
Yes. We work as ODM (our catalogue designs) and OEM (your drawings, dimensions, basin specification, hardware and private-label or retail-ready packaging), including painted and colour-matched fronts, fluted and shaker-style doors, and rubberwood bodies with stone or lacquered tops on powder-coated iron frames.
Sample the finish, then ship from one container up.
Approve the colour, paint and sealed finish on a physical sample, then scale from a trial order to high-volume repeat containers on a 30–45 day lead time — QC-governed and documented for your market. Read the full species profile on the rubberwood material guide, or compare sizes, tops and other materials on the bathroom vanities hub.