Mango wood bar stools — solid-hardwood counter and bar seating, manufactured for export.
A dense, cost-advantaged hardwood with a lustrous grain and a deforestation-free orchard story — built as a genuine solid-wood bar stool with a shaped seat, sturdy footrest and real joinery, not a veneered knock-together. Counter, bar and spectator heights, manufacturer-direct, compliance-documented and container-ready, from a trial order up.
A high-turnover seating SKU that reads as craft — in a hardwood you can stand behind.
A bar stool is a tall, footrest-equipped seat matched to a counter or bar top — a fast-moving line for kitchen islands, home bars, cafés, restaurants and hotel lounges, and one that sells in multiples. Made in mango, it bridges cheap tube-metal stools and premium rosewood: real density in the seat and frame, a characterful grain that photographs and sells well online, and orchard-sourced timber that keeps your range solid wood and deforestation-free. Every stool carries a solid mango-wood component — seat, frame or both — and never plywood or particle board. Choose a ready design from our bar stool range or hand us your own; we build, finish and pack it to your market's standard.
Hard, light, stackable
A Janka hardness near 1,070 lbf puts mango alongside walnut and most oak — stiff enough that seats and stretchers take daily sit-down loads without loosening, yet light enough to lift, restack and reposition behind a busy counter.
Clean to carve & turn
Mango turns, routs and CNC-carves cleanly, so scooped saddle seats, turned legs, chamfered edges, footrest rings and tidy joint shoulders come out crisp and repeatable across a full production run.
A sustainability story
Harvested from spent fruit orchards on a replant cycle — a by-product of existing agriculture, documented with FSC chain-of-custody and Vriksh timber-legality for buyers who sell on provenance.
One timber, the full bar stool range.
Every stool carries a solid mango-wood seat or frame; we pair it with the base, back and seat treatment your channel sells. Mix heights and formats across a single container.
All-wood counter & bar stools
Solid mango seats, turned or tapered legs and integral footrests — the warm, mid-century look that sells across retail and lounges.
Mango wood properties
Mango & iron industrial stools
Solid mango seats on powder-coated wrought-iron bases with welded footrests — the industrial look that ships knock-down for bars and cafés.
Explore wood & iron pairings
Upholstered & cane-seat stools
Leather, fabric, cane or rattan seats on mango frames — comfort-led stools built to commercial strength for hotel and restaurant floors.
Hospitality & contract stoolsMatch the stool to the counter.
Allow roughly 10–12 in (25–30 cm) between the seat and the underside of the top for comfortable legroom. Figures below are standard starting points in mango — we build to your exact seat height, seat shape and footrest position for contract projects.
| Type | Seat height | Suits top height | Typical use |
|---|---|---|---|
| Counter stool | 24–26 in · 61–66 cm | 35–37 in · 89–94 cm | Kitchen islands, café counters |
| Bar stool | 29–31 in · 74–79 cm | 40–42 in · 102–107 cm | Home bars, restaurant bars |
| Spectator / extra-tall | 33–36 in · 84–91 cm | 44–47 in · 112–119 cm | Raised bars, poseur tables |
| Backless stool | 24–31 in · 61–79 cm | Counter or bar | Tuck-under, space-saving layouts |
Indicative specs — every height, seat and finish is made to your order.
Figures below are typical ranges for reference. We manufacture to your exact drawings and market requirements, so height, seat shape, back style, swivel, footrest and finish are all specified at the quote stage. Mango is kiln-dried for stability, and lot and finish traceability is documented where applicable.
| Attribute | Typical range / options |
|---|---|
| Seat & frame wood | Solid mango (Mangifera indica) · ~1,070 lbf Janka |
| Seat treatments | Shaped wood (round, saddle, square) · leather/upholstered pad · cane or rattan weave · marble insert |
| Base & pairings | All-mango legs or powder-coated wrought iron; brass, cane or reclaimed-wood detailing |
| Heights | Counter 24–26 in · bar 29–31 in · spectator 33–36 in (made to spec) |
| Back & motion | Backless, low-back or high-back; fixed or swivel; with or without footrest ring |
| Finish | Natural oil/wax, satin or gloss PU lacquer, stain, two-tone, painted, distressed — CARB/TSCA compliant |
| Assembly | Assembled, part-assembled or knockdown / flat-pack (RTA) with bolt-on legs |
| MOQ | Trial/sample via LCL; 1× 20ft FCL minimum thereafter; mixed-category containers supported |
| Lead time | 30–45 days typical after sample approval; urgent at premium |
| Shipping | FOB / CIF from Mundra or Nhava Sheva · ISPM-15 heat-treated packing |
Where a mango bar stool earns its place.
A finisher's wood
Mango's open, receptive grain carries everything from pale limewash to deep espresso cleanly, which is why it is the go-to timber for painted and two-tone stools. We supply natural matte oil and wax for the on-trend organic look, satin and gloss PU lacquer for harder-wearing seats that shrug off a working bar, hand-distressed and antique tones, walnut and grey stains, and colour-blocked frames banded with iron or brass. Seats are sealed to resist spills and ring-marks, and all interior-market finishes are specified CARB / TSCA Title VI formaldehyde-compliant on request, matched to your reference or Pantone.
Rooms, channels & care
Kitchen islands, home bars and breakfast counters for retail ranges; guest suites, lobby bars, rooftop and restaurant floors for hospitality and contract buyers, who favour the commercial-strength frame and reinforced footrest; styled schemes for interior designers; and compact, flat-pack-friendly SKUs for online sellers needing branded, Amazon-FBA-ready cartons. Care is simple — wipe with a soft, slightly damp cloth and refresh with furniture oil or wax; avoid soaking and harsh solvents. Because mango is not naturally rot-resistant, we build these stools for indoor use — for covered outdoor or patio bar service, acacia or teak is the better call.
A bar stool that clears customs — not one that sits at the port.
Because mango comes from managed orchards rather than forest, it is a natural fit for today's import rules — and it sidesteps the CITES scrutiny that follows sheesham. We supply every stool with FSC chain-of-custody and Vriksh timber-legality documentation, EUDR-ready geolocation and deforestation-free due diligence, US Lacey Act declaration support and UK Timber Regulation readiness — all backed by ISO, SGS and SEDEX/SMETA audits and packed to ISPM-15. Certificate details go directly to serious buyers on request. See every certification and timber-legality document we hold.
| Requirement | How mango stools are supplied |
|---|---|
| Timber legality | Vriksh verified · orchard-sourced |
| Sustainability | FSC chain-of-custody · orchard by-product |
| EU market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Export packing | ISPM-15 heat-treated · flat-pack options |
Questions buyers ask about mango wood bar stools.
Why is mango wood a good choice for a bar stool?
Mango (Mangifera indica) is a dense tropical hardwood — a Janka hardness around 1,070 lbf, close to black walnut and most oak — so a mango seat and frame carry the repeated sit-down loads of a working bar without the loose joints and splitting you get from softwood or particle-board stools. It is light enough to lift and restack behind a counter yet hard enough for daily retail and hospitality handling, turns and CNC-carves cleanly for shaped saddle seats, turned legs and footrest rings, and takes stain, paint and lacquer evenly for two-tone and contemporary ranges. Because the timber comes from spent fruit orchards on a replant cycle, your stools stay genuine solid wood with a deforestation-free story buyers trust.
What seat heights do mango wood bar stools come in?
We build three standard heights in mango: counter stools at roughly 24–26 in (61–66 cm) for 36 in islands and café counters, bar stools at roughly 29–31 in (74–79 cm) for 40–42 in bar tops, and spectator or extra-tall stools at 33–36 in (84–91 cm) for raised bars and poseur tables. Backless and swivel versions are available in each height, and we build to your exact seat height for contract and hospitality projects.
What is the minimum order for wholesale mango wood bar stools?
A trial or sample order can ship LCL (part-container) so you approve the wood, finish and build first. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and because a knockdown stool flat-packs densely we consolidate mango bar stools with dining chairs, tables, bar cabinets, décor and metalware into a single mixed container. Typical lead time is 30–45 days after sample approval, with urgent orders at a premium.
Can you make mango wood bar stools to our own design or private label?
Yes. We work as both ODM (our catalogue designs) and OEM — manufacturing to your drawings, seat shape, height, footrest detail, swivel mechanism, finish and hardware, with custom CNC carving, your branding and retail-ready or Amazon-FBA-ready cartons. Send a reference image or a spec sheet and we prototype a sample mango bar stool to it, including commercial-grade builds for hospitality floors.
Are mango wood bar stools compliant for US and EU import?
Yes. We document FSC chain-of-custody and Vriksh timber-legality, backed by ISO, SGS and SEDEX/SMETA audits. We are EUDR-ready with geolocation and deforestation-free due diligence, and we support US Lacey Act declarations, UK Timber Regulation, CARB/TSCA Title VI formaldehyde-compliant finishes and ISPM-15 export packing. Certificate details are shared directly with serious buyers on request.
Are mango wood bar stools strong enough for commercial bar and restaurant use?
Yes — contract and hospitality buyers are a core segment. We kiln-dry the mango to stable moisture before joinery and build commercial-strength frames with mortise-and-tenon or dowelled joints, corner blocking and reinforced footrests for the high-cycle loading a bar or café demands. Pair the wood seat with a powder-coated wrought-iron base where you need extra durability, and tell us your venue so we confirm the right build at the quote stage.
Send a reference, a drawing or a height spec — we'll quote, sample and ship.
Tell us the height, quantity and market. We confirm wood, seat treatment, finish, MOQ and a FOB/CIF price from Mundra or Nhava Sheva, produce a sample for approval, then manufacture and pack to your standard on a 30–45 day lead time.