Bone inlay wardrobes — hand-set patterns on solid-wood carcases, built for export.
A wardrobe is the tallest canvas in the bedroom, and its doors give bone inlay a full-height surface to command a room. We lay hundreds of hand-cut pieces in resin over a hand-painted ground, across doors hung on a solid mango or sheesham carcase that holds square under a full hanging rail. Manufactured in Jaipur-tradition workshops, legally sourced and EUDR-ready, from a trial order up to repeat container volumes.
A centuries-old Rajasthani craft, scaled to a full-height statement piece.
Bone inlay is one of the signature decorative arts of Rajasthan. Craftspeople hand-cut thin pieces of camel or buffalo bone — an abattoir by-product, never from hunted animals — then lay each piece individually into a resin bed, separating them with a hand-painted background that throws the pattern into relief. A wardrobe gives that pattern the largest vertical surface in the home: tall doors where a floral vine can climb the full height, or a lattice can repeat across two and three panels as one continuous composition. What matters for a buyer is what sits beneath that face. We build the carcase, doors and shelves from solid mango or sheesham, not panel board, so a cabinet this tall stays square, hangs its doors true and carries a loaded hanging rail for years. That pairing — genuine hand craft over honest solid-wood construction — is exactly where Jodhpur and Jaipur workshops out-compete mass-produced imports. For fully animal-free ranges, our resin-inlay version reads the same across a shop floor.
What defines a bone inlay wardrobe.
| Attribute | Bone inlay wardrobe characteristic |
|---|---|
| Carcase, doors & shelves | Solid mango or sheesham — holds square when tall, hangs doors true, carries a full hanging rail |
| Inlay material | Hand-cut camel/buffalo bone (animal by-product) set in resin; vegan resin-inlay alternative available |
| Pattern range | Floral vine, herringbone, scallop, star, Moroccan lattice — fully customisable |
| Ground colours | Hand-painted charcoal, ivory, grey, indigo, blush, sage, teal — Pantone to brief |
| Format | Single, two- and three-door hinged wardrobes, armoires and linen presses |
| Interior | Hanging rail, adjustable shelves, optional drawers and shoe racks to specification |
| Surface finish | Sealed matte or satin; resists daily handling and light moisture |
| Craft variation | Minor line and tone variation is inherent and authentic to hand-laid inlay |
| Best settings | Boutique hotels, boho and luxe retail, interior-design projects, statement bedrooms |
| Sustainability | FSC chain-of-custody and Vriksh on request; EUDR-ready carcase sourcing |
Because pattern and ground are hand-made to order, we strongly recommend approving a physical sample door before production. Request a bone inlay wardrobe sample and we will send pattern, colour and carcase references for your range, or compare woods and styles across the full wardrobes hub.
Single, two- and three-door wardrobes, armoires and matching pieces.
Every dimension below is a standard starting point — we build inlay wardrobes to your exact width, height, depth and door count for retail ranges, hospitality and interior projects.
| Type | Doors | Typical size (W × D × H) | Typical use |
|---|---|---|---|
| Single-door wardrobe | 1 | 90 × 55 × 190 cm | Apartment ranges, smaller rooms |
| Two-door wardrobe | 2 | 110 × 58 × 200 cm | Core bedroom hanging and shelving |
| Three-door wardrobe | 3 | 150 × 60 × 200 cm | Statement wall, master suites |
| Compact armoire | 2 | 100 × 50 × 180 cm | Boutique hotels, dressing rooms |
| Linen press | 2 | 95 × 50 × 185 cm | Shelved storage, upper and lower doors |
Build options
Solid mango or sheesham carcase and doors; concealed or exposed brass hinges; internal hanging rail, adjustable shelves, drawers and shoe racks; soft-close options; turned, bun or tapered legs; brass or bone-topped knob pulls to match the inlay.
Pattern & finish
Floral, herringbone or lattice inlay over a hand-painted ground in your colours, sealed matte or satin, in CARB / TSCA Title VI formaldehyde-compliant formulations. Resin-inlay available for animal-free ranges.
Packing & shipping
Built assembled in rigid corner-protected crates, or knockdown with doors, panels and shelves flat-packed to maximise container density. Retail-ready, Amazon-FBA-ready or branded packaging, ISPM-15 heat-treated, FOB or CIF from Mundra / Nhava Sheva.
Decorative on the doors, documented underneath.
The solid-wood carcase of every bone inlay wardrobe ships with FSC chain-of-custody on request, Vriksh timber-legality verification, and EUDR-ready geolocation and deforestation-free due diligence. We provide US Lacey Act declaration support, UK Timber Regulation coverage, and CARB / TSCA formaldehyde-compliant finishes, with social and quality assurance under SEDEX / SMETA, ISO and SGS inspection, and ISPM-15 heat-treated export packing. Bone is documented as an animal by-product with CITES-compliant handling where relevant, and our resin-inlay option removes animal-origin paperwork entirely. Certificate references go directly to serious buyers — never published.
| Area | Our standard |
|---|---|
| Timber legality | Vriksh verified · documented chain |
| Sustainability | FSC chain-of-custody on request |
| EU market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Inlay origin | Bone by-product · CITES-compliant · resin alt. |
| Export packing | ISPM-15 heat-treated · assembled or flat-pack |
Keep a full-height inlay front crisp for years.
Bone inlay asks only for gentle, consistent care. Dust with a soft dry cloth and wipe occasional marks with a barely-damp cloth, then dry immediately — avoid soaking, abrasive pads and solvent cleaners, which can dull the sealed surface and the painted ground. Keep the wardrobe out of standing water and prolonged direct sunlight, which over time can fade any painted furniture. The solid carcase and doors are kiln-dried to a stable moisture level before assembly, so a tall cabinet stays square and the doors keep their swing across climates; hinges can be adjusted and re-seated if they settle after transit. Because each piece of inlay is hand-laid, slight differences in line and tone are part of the craft and will not affect wear. Full care and finish guidance ships with every order, so your retail and hospitality customers receive consistent advice. For the detail behind the material itself, see our bone inlay material guide.
Bone inlay wardrobe sourcing, answered.
What is a bone inlay wardrobe made from?
The carcase, doors and shelves are solid wood — usually mango or sheesham — so a tall, heavy wardrobe holds square, hangs its doors true and carries a full hanging rail without sagging. The decorative face is built from hundreds of hand-cut inlay pieces, traditionally camel or buffalo bone (an abattoir by-product, never from hunted animals), set one by one into a resin bed and separated by a hand-painted background colour. We also offer a vegan resin-inlay alternative that reads identically on a shop floor for buyers who prefer a fully animal-free product.
Are the inlay patterns and background colours customisable?
Yes. Bone inlay is a hand-craft, so pattern and ground colour are fully open to your brief. Popular patterns are floral vine, herringbone, scallop, star and Moroccan lattice; popular grounds are charcoal black, ivory, slate grey, indigo, blush pink, sage and teal. We work ODM from our catalogue or OEM to your artwork, Pantone references and private-label packaging — ideal for boho, luxe and eclectic retail ranges.
What wardrobe sizes and door layouts do you make?
A wardrobe is tall and vertical, so its doors give bone inlay a dramatic full-height canvas. We build single-door, two-door and three-door hinged wardrobes, compact armoires and linen presses, with internal hanging rails, adjustable shelves and optional drawers. Every width, height, depth and door count is made to your specification; the sizes table on this page shows the configurations we build most often.
How durable is a bone inlay wardrobe for everyday bedroom use?
Very durable. Each inlay piece is bonded in resin and the surface is sealed, so the pattern resists daily handling, light moisture and fading when kept out of standing water and harsh sun. The solid-wood carcase is kiln-dried before assembly so a tall cabinet stays square and doors keep their swing across climates. Because every piece is hand-laid, minor variation in line and tone is inherent to the craft and is a mark of authenticity, not a defect.
Do bone inlay wardrobes meet US and EU import rules?
Yes. The solid-wood carcase ships with FSC chain-of-custody on request, Vriksh timber-legality verification and EUDR-ready geolocation and deforestation-free due diligence, with US Lacey Act declaration support, UK Timber Regulation coverage and CARB / TSCA-compliant finishes. Bone is documented as an animal by-product with CITES-compliant handling where relevant; the resin alternative removes animal-origin paperwork entirely.
What is your minimum order, and can wardrobes ship flat-pack?
A trial or sample order can ship LCL as a part-container. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate inlay wardrobes with matching dressers, nightstands and mirrors into a single container. Because a wardrobe is tall and bulky, knockdown construction — doors, carcase panels and shelves flat-packed for on-site assembly — makes strong commercial sense and maximises container density; we build both assembled and flat-pack to your preference.
Approve a pattern sample, then ship from one container up.
Sign off the inlay pattern, ground colour and carcase on a physical sample door, then scale from a trial order to repeat container volumes on a 30–45 day lead time — QC-governed and documented for your market. Compare woods, hardware and styles on the wardrobes hub, or send drawings and Pantone references with your request a quote.