Iron and wood dining tables — live edge slabs on hand-welded metal bases.
Natural-edge solid-wood tops married to powder-coated iron and steel frames — welded and finished in Jodhpur, kiln-dried, compliance-documented and container-ready for importers, retailers, online sellers and hospitality buyers worldwide.
Two materials, one of the fastest-moving looks in dining.
The iron-and-wood dining table is the backbone of the industrial, loft and modern-rustic ranges that retailers and online sellers move in volume. The appeal is honest: a warm, grained solid-wood slab set against a crisp black metal frame reads as both handcrafted and architectural. Jodhpur is uniquely placed to make it — the city is India's largest solid-wood cluster and its oldest wrought-iron and metal-furniture cluster, so the slab and the base are cut, welded and finished under one QC roof rather than bought in from two suppliers. That single-source control is why the weld lines are clean, the frame sits level, and the top and base arrive as a matched set.
Rigid, level frame
A welded steel or wrought-iron base carries a wide slab without sag or wobble — the structural job wood legs struggle with on long tops.
Solid-wood warmth
A natural live edge top in acacia, sheesham, mango or reclaimed wood brings genuine grain and character to an otherwise hard material.
Commercial durability
Powder-coated metal shrugs off knocks and daily wear, making this format a favourite for restaurants, cafés and bars as well as homes.
Cost-advantaged
Delivers the premium industrial look at a competitive, container-friendly cost base — slab and frame fabricated in one place.
Tops, bases, finishes and formats.
Slab top
Single-slab, book-matched or joined live edge in acacia, sheesham, mango, teak or reclaimed wood; butterfly keys and breadboard ends on wide tops to keep them flat.
Metal base
Box-section and flat-bar steel or wrought iron — trestle, A-frame, U-leg, hairpin, X-frame, cross-braced and scrolled designs, welded and ground smooth.
Finishes
Matte-black, gunmetal, bronze, raw clear-sealed or custom RAL powder coat on the base; natural oil, matte / satin / gloss lacquer or custom stain on the wood.
Formats
Four- to eight-seat tops, long communal and boardroom lengths, plus matching metal-base benches and consoles to complete a range.
Buyers use iron-and-wood tops as headline pieces: statement dining tables for independent retailers and online ranges, communal and bar tables for restaurants and cafés, and boardroom and reception tops for contract fit-outs. For the full slab program across every wood and base, see the live edge dining tables hub, or read the material deep-dive on wrought iron and metal fabrication.
Iron and wood live edge dining table specifications.
Indicative ranges for quoting — all dimensions, slab thickness, edge profile, base design and powder-coat colour are made to order under our OEM program. Seating is approximate for a natural-edge top.
| Format | Typical length × width | Slab thickness | Seats | Common metal base |
|---|---|---|---|---|
| 4-seat | 1400–1600 × 800–900 mm | 40–50 mm | 4 | Hairpin / U-leg steel |
| 6-seat | 1800–2000 × 900–1000 mm | 45–55 mm | 6 | Trestle / A-frame steel |
| 8-seat | 2200–2400 × 1000–1100 mm | 50–60 mm | 8 | Wrought iron / cross-braced |
| Communal / boardroom | 2600–3600 × 1000–1200 mm | 55–75 mm | 10–14 | Twin or triple steel frame |
| Attribute | Detail |
|---|---|
| Top | Solid-wood live edge slab — acacia, sheesham, mango, teak or reclaimed wood; kiln-dried to export moisture levels |
| Base | Mild steel or wrought iron; hand-welded, ground smooth, slotted top fixings allow wood movement |
| Metal finish | Powder-coated matte black, gunmetal, bronze, raw clear-sealed or custom RAL |
| Wood finish | Natural oil, matte / satin / gloss lacquer, custom stain — CARB / TSCA Title VI compliant |
| Assembly | Knockdown / flat-pack (base bolts off the top) or fully assembled |
| MOQ | Trial / sample LCL; thereafter 1× 20ft FCL for best pricing; mixed loads supported |
| Lead time | 30–45 days typical; urgent orders at premium |
| Shipping | FOB / CIF from Mundra / Nhava Sheva; ISPM-15 heat-treated packing |
| Model | ODM (our designs) + OEM (your drawings, finishes & private label) |
The wood clears customs; the metal clears quality.
An iron-and-wood table carries one legal variable that matters at the port — the solid-wood slab. We cut it from Vriksh-verified, FSC chain-of-custody stock and prepare EUDR geolocation and deforestation-free due diligence before you ask, with CITES-compliant handling of sheesham. US Lacey Act declaration support, UK Timber Regulation, CARB / TSCA finishes and ISPM-15 packing are covered as standard. The metalwork is governed by the same QC line — welds inspected, powder coat checked for coverage and adhesion — under SEDEX / SMETA, ISO and third-party SGS oversight.
| Requirement | Our standard |
|---|---|
| Timber legality | Vriksh verified · FSC chain-of-custody · CITES sheesham |
| Sustainability | Deforestation-free sourcing · reclaimed slab lines |
| EU market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Social audit | SEDEX / SMETA · ISO · SGS inspection |
| Export packing | ISPM-15 heat-treated · flat-pack options |
Keeping a slab flat and a frame rust-free.
Our slabs are kiln-dried to export moisture levels and engineered to move with the seasons — butterfly keys, breadboard ends and slotted base fixings let a wide top expand and contract without splitting against the rigid metal. For your end customers the care story is simple: keep the table out of direct heat and prolonged sun, wipe the wood with a soft dry or barely-damp cloth, use mats under hot dishes, and wipe the powder-coated frame with a dry or lightly damp cloth — no abrasives, which protect the coat that keeps iron rust-free. Oil-finished tops benefit from a periodic re-oil; lacquered tops need only routine dusting. We supply finish-specific care guidance per order so retailers and hospitality buyers can brief their own customers correctly.
Pair your iron-and-wood tops with matching industrial dining chairs and metal-base benches to ship a complete, single-source dining range in one container.
Iron and wood dining tables — FAQs.
What is an iron and wood dining table?
It is a dining table that pairs a solid-wood top — on our live edge program, a natural-edge slab of acacia, sheesham, mango or reclaimed wood — with a fabricated metal base in iron or steel. The wood gives warmth and grain; the welded, powder-coated metal gives a rigid, level, industrial-look frame that carries wide slabs without sagging. It is the classic industrial and loft dining format.
Is iron or wrought iron used for the base?
We fabricate bases from mild steel and wrought iron, hand-welded in Jodhpur and finished with a durable powder coat — most commonly matte black, but also gunmetal, bronze, raw clear-sealed or custom RAL colours. Wrought iron suits scrolled and traditional frames; box-section and flat-bar steel suit modern trestle, A-frame and hairpin designs. We build to your drawing either way.
What sizes do your iron and wood dining tables come in?
We build to order. Typical formats run from a 4-seat 1400–1600 mm top to 8-seat tables at 2200–2400 mm, with communal and boardroom lengths of 2600–3600 mm and slab thickness of 40–75 mm. As an OEM manufacturer we also match your exact length, width, edge profile, base style and powder-coat colour.
Are your iron and wood dining tables compliant for import into the US and EU?
Yes. We document FSC chain-of-custody and Vriksh timber-legality for the wood, handle CITES-compliant sheesham, and are EUDR-ready with geolocation and deforestation-free due diligence. We support US Lacey Act declarations and UK Timber Regulation, finishes meet CARB / TSCA Title VI formaldehyde norms, and packing is ISPM-15 heat-treated.
Can iron and wood tables ship flat-pack?
Yes, and it is the smart way to ship them. The metal base detaches from the slab top and packs flat, which lowers freight cost and breakage risk and raises container density — important when a steel frame adds weight. Fully assembled tables are available on request; most importers and online sellers choose knockdown.
What is your minimum order for iron and wood dining tables?
A trial or sample table can ship LCL (part-container) so you can approve the slab, grain, weld quality and powder-coat finish first. For best wholesale pricing thereafter, our standard minimum is one 20ft full container load, and these tables can be mixed with benches, consoles and other categories into a single compliant container.
Request a quote, or a sample table, and build your range.
Send your sizes, base design, powder-coat colour and wood direction, or ask for our catalogue. We quote FOB / CIF from Mundra / Nhava Sheva with MOQs and a 30–45 day lead time, and ship a sample table so you can approve the real slab, weld and finish before committing to a container.