Wrought iron bathroom vanities — hand-forged frames, powder-coated for the bath.
A hand-forged iron base gives a vanity an open, architectural, industrial look — and the strength to carry a heavy stone or solid-wood top. We forge and powder-coat them in Jodhpur, pair them with a top of your choice, and ship them knockdown and flat from a single trial order up to repeat container volumes.
Strength and a slim, open line that wood alone cannot give.
Jodhpur is as well known for its ironwork as for its wood, and a wrought-iron base brings a vanity two things timber cannot. The first is structure: hand-forged iron is enormously strong for its section, so a slim frame can carry a heavy marble top, a full basin and daily leaning without a chunky carcase underneath — which is exactly what gives the industrial washstand its light, open, legs-and-shelf look. The second is versatility of line: iron can be worked square and minimal, splayed mid-century, curved into scrollwork or bent into hairpin legs, so one material spans industrial, farmhouse, vintage and modern bathroom ranges. The only real question in a bathroom is corrosion, and that is a finishing matter, not a material flaw. We clean, prime and powder-coat every frame — an oven-baked coating far tougher than wet paint — so the steel is sealed against humidity and splash. The result is a vanity base that is strong, slim, corrosion-protected and endlessly configurable with the top of your choice.
What a forged iron base brings to a bathroom vanity.
| Attribute | Wrought iron vanity characteristic |
|---|---|
| Material | Hand-forged iron / mild steel frame — solid bar or box section, fully welded and dressed |
| Strength | Very high for its section — carries heavy stone or solid-wood tops, a full basin and daily load |
| Corrosion protection | Cleaned, primed and oven-baked powder-coated; welds dressed before coating; no raw points |
| Finishes | Matte black, graphite, pewter, antique bronze, gold and custom powder-coat colours |
| Styles | Industrial washstand, mid-century splay, ornate scrollwork, traditional, hairpin leg |
| Top pairing | Solid mango, teak, sheesham, acacia, reclaimed wood, or natural marble / stone |
| Levelling | Cross-braced for wide spans; adjustable feet for uneven bathroom floors |
| Best settings | Industrial, farmhouse and modern bathrooms; hotels, lofts and open washstand layouts |
Powder-coat colour and sheen vary by specification — we recommend approving a coated iron swatch and top pairing before production. Request a wrought iron vanity sample and we will send finish and top references. For the full material profile, see the wrought iron material guide.
Open or closed, single or double — matched to your basin.
Every dimension below is a standard starting point. We forge frames and fit tops to your exact width, height and basin cut-out for industrial and hospitality projects, pre-bored to your plumbing standard.
| Type | Width | Depth | Height |
|---|---|---|---|
| Compact / cloakroom washstand | 24 in · 60 cm | 18 in · 46 cm | 32–34 in · 81–86 cm |
| Single washstand | 30–36 in · 76–91 cm | 20 in · 50 cm | 32–34 in · 81–86 cm |
| Wide single | 48 in · 122 cm | 21 in · 53 cm | 34–36 in · 86–91 cm |
| Double washstand | 60–72 in · 152–183 cm | 21–22 in · 53–56 cm | 34–36 in · 86–91 cm |
Frame options
Open washstand with one or two shelves for the industrial look, or closed frames housing soft-close drawers and doors for storage. Square, splayed, scrolled or hairpin legs; wall-hung iron brackets; cross-bracing and adjustable feet as standard.
Tops & coatings
Solid mango, teak, sheesham, acacia or reclaimed-wood tops, or natural marble and stone, cut for vessel, drop-in or under-mount basins. Powder-coat in matte black, graphite, pewter, antique bronze, gold or your custom colour.
Packing & shipping
Frames ship knockdown and flat for maximum container density; tops crated separately with edge protection. Carton, retail-ready or branded packaging, ISPM-15 heat-treated export packing, shipped FOB or CIF from Mundra / Nhava Sheva.
Metalware and timber, documented for your market.
A wrought-iron vanity combines forged metal with a wood or stone top, and we document both. Iron frames are inspected for weld integrity, coating adhesion and load tolerance under ISO quality management and SGS third-party inspection, with ethical and social assurance under SEDEX / SMETA. Any solid-wood top ships with FSC chain-of-custody on request, Vriksh timber-legality verification, EUDR-ready due diligence and US Lacey Act support, finished in CARB / TSCA Title VI formaldehyde-compliant formulations. Everything travels in ISPM-15 heat-treated export packing. Certificate references go directly to serious buyers, never published.
| Area | Our standard |
|---|---|
| Metal frame | Weld & coating inspected · load tested |
| Wood top | Vriksh verified · FSC on request |
| EU market | EUDR-ready wood tops · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Social & quality | SEDEX / SMETA · ISO · SGS inspection |
| Export packing | ISPM-15 · knockdown flat frames |
Forged to last, finished to shrug off the bathroom.
A wrought-iron vanity is among the most durable bases you can specify, because iron does not swell, crack or soften the way wood can in a damp room — its only enemy is corrosion, and the powder-coat handles that. We clean and prime every frame, dress the welds smooth, then oven-bake a powder-coat finish that seals the steel and resists chips far better than wet paint. For end-users the care is minimal: wipe the frame with a soft damp cloth, dry off standing water, and avoid abrasive pads that could scratch through the coating. In coastal or high-humidity spa environments we recommend an additional anti-corrosion primer and prompt drying after heavy use. The wood or stone top is cared for according to its own material — oiled or sealed for wood, sealed and pH-neutral cleaned for marble — and we ship guidance for both. Adjustable feet keep the unit level on uneven floors, so the frame never racks or stresses the top. Full care and finish guidance ships with every order.
Wrought iron vanity sourcing, answered.
Will a wrought iron vanity rust in a bathroom?
Not when it is finished the way we build it. Bare iron rusts in damp air, so every frame is cleaned, primed and powder-coated — an oven-baked finish far tougher and more moisture-resistant than wet paint — which seals the steel against bathroom humidity and splash. Welds are dressed before coating so there are no exposed raw points. For coastal or spa installs we can specify an extra anti-corrosion primer and advise prompt wiping of standing water.
What tops go with a wrought iron vanity base?
Iron frames are the structure; the top is yours to choose. We fit solid mango, teak, sheesham, acacia or reclaimed-wood tops for warmth, or natural marble and stone tops for a harder, more luxurious surface. Open iron frames with a single shelf and a vessel basin give the classic industrial washstand look; closed frames with drawers or doors give more storage. We build single or double.
Is a wrought iron vanity strong enough to hold a stone top and basin?
Yes. Hand-forged iron is extremely strong for its section, so a welded frame easily carries a heavy marble or stone top, a full basin of water and daily leaning. We size the box-section or solid-bar frame to the top's weight, cross-brace where spans are wide, and fit adjustable feet so the unit sits level on an uneven bathroom floor without racking.
What styles can you achieve in wrought iron?
Iron is versatile. We forge clean, square industrial washstands, slim mid-century splayed legs, ornate scrollwork and traditional bases, and hairpin legs — in matte black, graphite, pewter, antique bronze, gold and custom powder-coat colours. Paired with the right top, the same material covers industrial, farmhouse, vintage and modern bathroom ranges, all to your drawings.
What is your minimum order for wrought iron bathroom vanities?
A trial or sample order can ship LCL (part-container). For best wholesale pricing thereafter, one 20ft full container load is our standard minimum. Iron frames ship knockdown and flat, which maximises container density, and we consolidate vanities with iron mirrors, towel rails, shelving and other categories into a single mixed container.
Can you make wrought iron vanities to our own design and brand?
Yes. We work as ODM (our catalogue designs) and OEM (your drawings, dimensions, top specification, powder-coat colour, basin and private-label or retail-ready packaging), including custom scrollwork, logo-branded hardware, wall-hung iron brackets and matched iron-and-wood or iron-and-stone combinations.
Choose the frame, finish and top, then ship from one container up.
Approve the powder-coat finish, frame style and top pairing on physical samples, then scale from a trial order to repeat container volumes on a 30–45 day lead time — QC-governed and documented for your market. Read the full material profile on the wrought iron material guide, or compare tops and other materials on the bathroom vanities hub.