Live-edge bathroom vanities — natural-edge solid-wood slab tops, sealed for the bathroom.
A live-edge vanity turns a single solid-wood slab into the centrepiece of a bathroom — the organic edge of the tree running along the front, a vessel basin set into the face. We mill, flatten, seal and mount these in Jodhpur from legally sourced timber, FSC and EUDR-ready, built from a trial order up to repeat container volumes.
One slab, one tree, no two bathrooms alike.
The appeal of a live-edge vanity is honesty: instead of a machined rectangle, the buyer gets the actual contour of the trunk, bark line removed but the waney edge kept, every knot and ripple of figure on show. In a bathroom — a small, hard, tiled room — that single piece of warm natural timber does an enormous amount of work. We mill the top from one solid slab of mango, acacia, sheesham or suar, flatten and sand the working face to a smooth plane, and leave the long edge raw. A vessel basin sits proud on the surface so water stays in the bowl, and the taps mount to the slab or the wall. The one thing live-edge demands is correct sealing for a wet room, and that is exactly where a specialist manufacturer earns its place: we seal the face, the end-grain and the natural edge, and epoxy-fill voids so moisture has nowhere to track.
What defines a live-edge vanity top.
| Attribute | Live-edge vanity characteristic |
|---|---|
| Construction | Single solid-wood slab (or book-matched pair) with the natural waney edge retained |
| Slab woods | Mango, acacia (wide, figured, value) or sheesham / suar (darker, denser, premium) |
| Grain & character | Unique per slab — knots, mineral streaks, ripple and bark-line contour; no two identical |
| Void treatment | Natural cracks and voids epoxy / resin filled and stabilised against moisture |
| Basin fit | Drilled for vessel or semi-recessed basins; tap holes to your spec |
| Wet-room finish | Marine-grade or polyurethane lacquer, end-grain sealed; CARB / TSCA compliant |
| Base options | Floating cleats, four legs, hairpin or powder-coated iron frame |
| Sustainability | FSC chain-of-custody and Vriksh timber-legality on request; EUDR-ready sourcing |
Because slab figure and width vary by log, we recommend approving a physical slab before production. Request a live-edge sample and we will send grain, edge and finish references for your range, or browse builds across woods on the bathroom vanities hub.
Single, double and floating — matched to your bathroom.
Every dimension below is a standard starting point. As an OEM manufacturer we cut each slab to your width, depth, thickness, overhang and basin layout for retail ranges and hospitality projects alike.
| Format | Typical width | Depth | Basin |
|---|---|---|---|
| Compact single | 24–30 in · 61–76 cm | 18–20 in · 46–51 cm | Single vessel |
| Standard single | 36–48 in · 91–122 cm | 20–22 in · 51–56 cm | Single vessel / semi-recessed |
| Double vanity | 60–72 in · 152–183 cm | 21–22 in · 53–56 cm | Twin vessels, book-matched slab |
| Floating / wall-hung | To spec | To spec | Concealed cleat mount |
Build options
Slab thickness from a slim 1.5 in to a dramatic 2.5 in-plus; freestanding on legs or a black iron frame, or wall-hung on concealed cleats. Add a lower shelf, drawer box or towel rail, and drill for vessel, semi-recessed or wall-mounted taps.
Finishes
Natural matte, warm oiled tone, or tinted lacquer — all sealed for wet-room use in CARB / TSCA Title VI formaldehyde-compliant formulations. End-grain and waney edge sealed; voids clear or tinted resin-filled.
Packing & shipping
Slab tops corner-protected and crated against transit shock; bases flat-packed to cut freight. Carton, retail-ready or branded packaging, ISPM-15 heat-treated export packing, shipped FOB or CIF from Mundra / Nhava Sheva.
Natural slabs, documented timber.
A live-edge slab is still a piece of traceable timber, and the regulations tightening across your markets apply to it fully — so we built the paperwork around them. Every vanity ships with FSC chain-of-custody on request, Vriksh timber-legality verification, and EUDR-ready geolocation and deforestation-free due diligence. We provide US Lacey Act declaration support, UK Timber Regulation coverage, and CARB / TSCA formaldehyde-compliant wet-room finishes, with social and quality assurance under SEDEX / SMETA, ISO and SGS inspection, and ISPM-15 heat-treated export packing. Certificate references go directly to serious buyers — never published.
| Area | Our standard |
|---|---|
| Timber legality | Vriksh verified · documented chain |
| Sustainability | FSC chain-of-custody on request |
| EU market | EUDR-ready · geolocation · UKTR |
| US market | Lacey Act support · CARB / TSCA finishes |
| Social & quality | SEDEX / SMETA · ISO · SGS inspection |
| Export packing | ISPM-15 heat-treated · crated slabs |
Sealed to live with water, finished to show the wood.
A live-edge vanity survives a bathroom because of how it is built, not luck. Slabs are kiln-dried to stable moisture before milling, so the top will not cup or split as humidity swings; natural voids and the end-grain are sealed and resin-stabilised so water cannot wick into the fibres; and the working face carries a water-resistant lacquer rated for wet-room service. For day-to-day care, buyers wipe spills promptly, clean with a soft damp cloth and a mild pH-neutral product, and keep abrasive pads and solvent cleaners away from the finish. A vessel basin keeps standing water off the timber entirely. In heavy hospitality use the top can be lightly re-coated every few years to refresh protection — a quick job, since the slab beneath is solid wood throughout. Full care and re-finish guidance ships with every order so your customers get consistent advice.
Live-edge vanity sourcing, answered.
What is a live-edge bathroom vanity?
A live-edge vanity keeps the natural, un-straightened edge of the tree along the front or both sides of the slab top, so the organic contour of the trunk becomes the design. We mill a single solid-wood slab — mango, acacia, sheesham or suar — flatten and sand the face, retain the waney edge, and mount it on a wood or powder-coated iron base, usually drilled for a vessel or semi-recessed basin. Because every slab is different, no two vanities are identical.
Is a live-edge wood top suitable for a wet bathroom?
Yes, when it is sealed correctly — which is where many importers get burned by unsealed slabs. We finish bathroom slabs with water-resistant marine-grade or polyurethane lacquer in CARB / TSCA Title VI formaldehyde-compliant formulations, seal the end-grain and any bark line, and can epoxy-fill natural voids and cracks so water cannot track in. Specify a vessel basin so standing water sits in the bowl, not on the timber.
Which woods do you use for live-edge vanity slabs?
Mango (Mangifera indica) and acacia give wide, affordable slabs with dramatic figure; sheesham (Indian rosewood) and suar deliver darker, denser, more premium grain. We select slabs for width, character and sound structure, kiln-dry them to stable moisture, and can book-match two slabs for a double vanity. Each wood is sourced with FSC chain-of-custody and Vriksh timber-legality documentation on request.
Can you make live-edge vanities to our sizes and basin cut-outs?
Yes. As an OEM manufacturer we build to your widths, depths, slab thickness, overhang, basin diameter and tap-hole positions, and mount on floating cleats, four legs, a hairpin frame or a black iron base to your drawing. Send us your basin and tap specification and we drill and seal the cut-outs to suit.
What is the minimum order for live-edge bathroom vanities?
A trial order can ship LCL so you can approve slab character and sealing. For best wholesale pricing thereafter, one 20ft full container is our standard minimum, and we consolidate live-edge vanities with mirrors, shelves, console tables and other solid-wood ranges into a single mixed container.
How do buyers care for a live-edge vanity?
Wipe spills promptly, use a soft damp cloth and a mild pH-neutral cleaner, and avoid abrasive pads or solvent cleaners that strip lacquer. The sealed finish handles normal bathroom splashes; re-coat high-wear tops every few years in heavy hospitality use. Full care and re-finish guidance ships with every order for your retail and contract customers.
Approve a slab, then ship from one container up.
Sign off the grain, edge and wet-room finish on a physical sample, then scale from a trial order to repeat container volumes on a 30–45 day lead time — QC-governed and documented for your market. Compare woods, formats and bases on the bathroom vanities hub, or see the full solid-wood range across our furniture.