Restaurant furniture, built for the floor — contract-grade and made to your spec.
Solid-wood tables, chairs, booths, bar seating and terrace pieces engineered for commercial turnover — made to your FF&E schedule, documented for import, and consolidated into one container for a single venue or a multi-site rollout.
A dining room seats, turns and cleans hundreds of covers a week. Your furniture has to take it.
We build restaurant furniture to the standard a working floor demands — thicker solid-wood sections, reinforced and corner-blocked joinery, seat heights and table dimensions set to your covers-per-table plan, and commercial-grade finishes that shrug off spills, heat and daily sanitiser. The result reads as genuine Jodhpur craft on the floor and performs like contract furniture behind the scenes.
Tables & communal tops
Solid sheesham, mango, acacia and reclaimed-wood dining and communal tables, with wood-and-iron bases built for heavy daily use.
Explore dining tables
Chairs, stools & booths
Side and arm dining chairs, upholstered and cane-back seating, banquette and booth frames, plus bar and counter stools.
Explore seating
Bar, café & terrace
Bar tables, counter and reception stations, café tables and solid-wood-and-iron outdoor seating — all in one matched finish.
Explore outdoor furnitureThe full front-of-house package, specified for your floor.
Every line below is made to spec — your dimensions, wood species, finish and upholstery. Formats and typical sizing guide your seating plan; final build is confirmed against your approved sample.
| Piece | Typical format | Built to spec |
|---|---|---|
| Dining & communal tables | 2-, 4- and 6-seat tops; long communal runs | Wood species, top thickness, base style (pedestal, trestle, iron) |
| Dining chairs | Side & arm; stackable options | Seat height, cane or upholstered back, finish |
| Banquette & booth frames | Straight, L- and U-run | Length, back height, upholstery & foam to your fabric |
| Bar & counter stools | Counter (≈65 cm) & bar (≈75 cm) heights | Backless or back, footrest, finish |
| Bar tables & host stations | Poseur height; reception & host desks | Footprint, storage, branded front panel |
| Outdoor & terrace | Tables, benches & chairs | Weather-ready solid wood & iron, finish |
Dimensions are indicative formats to guide planning; we manufacture to your confirmed FF&E schedule. Compare wood species and material options before you spec a project.
From a single venue to a multi-site rollout — one source, one standard.
Our own factory plus a vetted Jodhpur manufacturing network means we fulfil a boutique restaurant's opening order and a chain's repeat container volumes to the same QC-governed standard. We sample first so you sign off wood, finish, seat height and upholstery before production, then run the full order on a 30–45 day lead time with inspection on every piece.
Flat-pack and knockdown formats cut freight and breakage on large orders, and a mixed container can carry tables, chairs, booths, stools and matching décor together. Factory visits are welcome on prior intimation.
| Project requirement | Our standard |
|---|---|
| Minimum order | Trial set LCL · 20ft FCL for best pricing |
| Consolidation | Tables, seating, bar & décor in one container |
| Lead time | 30–45 days typical · urgent at premium |
| Custom | ODM & OEM · CNC carving · private label |
| Shipping | FOB / CIF ex Mundra / Nhava Sheva |
| Packing | ISPM-15 heat-treated · flat-pack options |
Documented timber legality, so your fit-out container clears customs on schedule.
A delayed container stalls an opening date. We build the paperwork around the destination market so clearance is a non-event — FSC chain-of-custody and Vriksh timber-legality, EUDR-ready geolocation and deforestation-free due diligence, US Lacey Act declaration support, UK Timber Regulation, CARB / TSCA formaldehyde-compliant finishes and ISPM-15 export packing. ISO quality management, SGS third-party inspection and SEDEX / SMETA social audit back every order.
EU & UK
EUDR-ready with geolocation and deforestation-free due diligence, Vriksh-verified sheesham and FSC chain-of-custody, UK Timber Regulation covered.
Our EUDR readinessUnited States
US Lacey Act declaration support and CARB / TSCA Title VI formaldehyde-compliant finishes for commercial interiors.
All certificationsQuality & ethics
ISO quality management, SGS inspection and SEDEX / SMETA ethical audit — verifiable, buyer-ready documentation per shipment.
How we document qualityRestaurant furniture sourcing, answered.
What makes restaurant furniture different from residential furniture?
Restaurant furniture is built for commercial-cycle use: constant seating turnover, frequent cleaning, heavier loads and dimensions set to seating plans and covers-per-table. We spec thicker solid-wood sections, reinforced joinery, commercial-grade finishes that resist spills and sanitiser, and stackable or bench-run formats where a dining room needs them — rather than lighter residential builds.
Can you manufacture restaurant furniture to our drawings and FF&E specification?
Yes. We are both ODM and OEM — work from your catalogue, your architect's drawings, an FF&E schedule or a single reference photo. We match dimensions, wood species, finish, upholstery and seat height, produce a sample for approval, and then run the full order to that approved standard with QC on every piece.
What is the minimum order and lead time for a restaurant project?
A trial or sample set can ship LCL (part-container) so you approve the build before committing. For best wholesale pricing thereafter, one 20ft full container load is our standard minimum, and we consolidate tables, chairs, booths, bar stools and décor into one mixed container. Typical lead time is 30 to 45 days; urgent fit-out timelines can be run at a premium.
Is your restaurant furniture compliant for import into the US and EU?
Yes. We document FSC chain-of-custody and Vriksh timber-legality, are EUDR-ready with geolocation and deforestation-free due diligence, and support US Lacey Act declarations and UK Timber Regulation. Finishes meet CARB / TSCA formaldehyde norms, export packing is ISPM-15 heat-treated, and we carry ISO, SGS and SEDEX / SMETA social audit.
Which restaurant furniture pieces can you supply in one container?
Dining tables and communal tables, side and arm dining chairs, upholstered and cane-back chairs, banquette and booth frames, bar and counter stools, bar tables, reception and host stations, outdoor and terrace seating, plus matching décor. Flat-pack and knockdown formats maximise container density and cut freight on large multi-site rollouts.
Do you supply matching bar, café and outdoor furniture for the same venue?
Yes. We build the full front-of-house package in one coordinated finish — restaurant dining, bar and lounge seating, café tables, and solid-wood-and-iron outdoor or terrace pieces — so a single venue or a multi-site group sources one consistent look from one compliant container.
Send your FF&E schedule or a reference — we'll quote the full package.
Share your drawings, covers plan or a photo and we'll come back with wood species, finishes, MOQ and a FOB/CIF quote, plus a sample set so you approve the build before production begins.